Slow boot problem Everyone, help, help me solve the problem of slow boot, thank you!

1. In addition to the boot start item, there are many service items loaded by the system is also a reason, after I installed CAD2007, the system startup is super slow.

2、Storm video starts slowly because there is a contrl center of storm media in the system service item,This is his upgrade program,Can be disabled,You can open it again when you need to upgrade,Or directly download the new version,Overwrite the installation。

3. As for shutting down and turning off the cat, there is no order, at least for my machine, no abnormalities were found.

4. There are many reasons why it takes half a day to connect to the network, I will talk about the problems I encountered, the line resistance of the ** line is too large, find someone from the telecommunications bureau to help you test it, and then let him help you change one, free of charge.

If you are ADSL dial-up Internet access, just set the network card IP casually For example, the electronic mask system default can be If it is a router or wiring broadband, it is not a problem or a computer virus

to set the IP address. It can be turned on faster, but it will only be 10 seconds faster.

The second. and and. Turn the cat off first. Then turn on the machine for 1 minute, and then turn on the cat to surf the Internet.

It didn't work out this way before, because what you have now has a lot of effects on the boot speed. If you can't stand it, just do it.

Reinstall the system, or msconfig disables the launch of unnecessary projects from the service items.

It's good to clean up your C drive.,There should be junk files in it.,It's fast after cleaning up, my C drive only has the system and nothing else, and the boot time is 25 seconds!

If it is helpful to you, please remember to accept it as a satisfactory answer, thank you! Have a great day!

vae la

1. Restore or optimize BIOS settings. 

After turning on the computer or restarting the computer, "CD...... is displayed on the screen, press the "DEL" key to enter the BIOS settings interface, award

loadbios

defaults, this option is used to load the BIOS initial settings to determine the scope of the failure.

loadoprimum

Settings (load motherboard BIOS factory settings), which are optimized settings for the factory BIOS.

or amlload

biossetup

defaults, which is used to load the initial BIOS settings.

loadhigh

performance

defaults (high performance default), this option is used to load BIOS optimization settings.

After selecting the default or optimized value with the keyboard arrow keys, press the ESC key, F10 key.

Y key, press Enter, Save and Exit Settings.

2. Turn off the floppy drive.

Reboot, press del into the BIOS, and find Standard

cmossetup

Press Enter in the interface that opens and place Drive

A: and driveb: both change to none, and floopy

3 (floppy drive) is set to disable, press the esc key, and the F10 key.

Y key, press Enter, Save and Exit Settings.

3. The floppy drive is not detected when it is turned on.

Reboot, press del into the BIOS, and find Advanced

biossetup

Press Enter in the interface that opens, and set "Boot."

upfloppy

seek", set to "disabled", press the esc key, and press the f10 key.

Y key, press Enter, Save and Exit Settings.

4. Set the hard disk as the first boot. Reboot, press del into the BIOS, and find Advanced

For BIOSFEATURES, press Enter to Advanced

The biosfeatures interface will be first

bootdevice

Set to HDD-O (Hard Disk Boot).

5. Check and replace the motherboard battery.

Turn on the computer to see if you don't need to press F1 anymore.

The inch floppy disk can only be opened after the floppy drive is wiped into the floppy disk, leave it alone.

It could be a heat dissipation issue. The chassis opens. See if there is a problem with the CPU fan and the power supply fan.

Turn the fan with your hand. See if the speed of rotation is slow... It's hot now.

Heat dissipation issues will arise. It's a good idea to add a big fan to the back of the case. Generally, there will be a large fan installation position at the back of the case.

There are four small holes. For screwing...

It is recommended that the landlord use 360 to check what is available when the phone is turned on and entered the city? The deletion of the deletion If there is no suspicious startup item at boot, then please enter the safe mode to check and kill the virus.

If the temperature is not high, it is estimated that there is a small problem with your hard drive.

Here's my opinion:

You must have installed 360 Guardian and 360 Antivirus, I advise you to uninstall 360 Guard, you can also uninstall it, you can't use 360 Guardian at all when you're usually fine, you use it mainly because it's more convenient for you to clean up computer junk;

Win+R type msconfig to see the startup items, just turn off all startup items except 360 antivirus.

There are too many development software installed in your computer, VC++ installed 2005 version, 2008 version, 2010 version, 2012 version, if you don't use it, it is recommended to uninstall them all, and there are not too many files in your system disk, the space is too small, it will also affect the boot speed, you can defragment the system, and you can also improve the boot speed.

It is normal to turn on the machine for one minute. Don't dwell on it. If you want to boot up quickly, it is recommended to buy an SSD, which turns on in less than 15 seconds.

Ban a bunch of things from ASUS,Delete Windows Defender,Prohibit system firewall,Visual2003 is a plug-in,You said there are a bunch of patches that should be played by the system,But how to get it should not be marked for more than 30 seconds。