There is always mold in the bathroom, is there anything that has a good mold removal effect?

The invention should be too damp, so it won't be ventilated, and if there's too much water in it, it will become moldy later, and you can ventilate it, and then you won't rain.

Mold is caused by dampness, as long as the ventilation is strengthened.

What to do if the bathroom is moldy?

The main cause of mold in the bathroom is dampness!

Therefore, if you want to solve the mold problem in the bathroom, the most important thing is to solve the dampness problem in the bathroom.

1. Dry and wet separation.

The bathroom must be separated from wet and dry, and there are many ways to separate wet and dry.

1. Shower room.

Making a glass shower room in the bathroom is best for separating wet and dry. The whole enclosed space is a good way to stop the water from the shower from flowing to the dry area. However, the cost of the glass shower room is relatively high, and the space will be limited, if it is a small space bathroom or a family without a lot of budget, the glass shower room is not the best choice.

2. Shower curtain + water blocking strip.

For bathrooms with small space, you can consider making a shower curtain, which is low cost and suitable for all kinds of toilets. The shower curtain style can also be changed at will, and it is also easy to clean. But the water blocking property of the shower curtain is not as good as that of a closed shower room, so we have to make a water blocking strip to effectively block the water in the shower area.

Whether it is a shower room or a shower area with a shower curtain partition, we must do a good job in the drainage of the shower area, and we must do a good job of floor drain.

2. Ventilation. One of the most important things we need to do to remove moisture from the bathroom is to ensure that the bathroom is ventilated. Only with good ventilation can the bathroom be less humid.

When the bathroom is not in use, open the window to ventilate it, and after bathing, open the window to ventilate. You can also install an exhaust fan in the bathroom to remove odors and moisture.

3. Dehumidifier.

You can place some dehumidifier in the bathroom to absorb moisture from the air. Achieve the effect of dehumidification.

4. Vinegar. Mix vinegar 1:1 with water and spray on the bathroom tiles. Wait for it to air dry completely before washing it to effectively remove mold.

You can try the old housekeeper mold removal gel, just used it two days ago to remove, and the surface is not damaged after use, it is still okay, as long as you apply a layer on it and wait for a few hours to wipe it clean with a towel.

For the mold of the bathroom can be treated with white vinegar, white vinegar not only has the effect of sterilization, but also can take away the stains attached to the surface of the tile, for the mold of the tile gap in the bathroom, you can use a toothbrush dipped in baking soda to clean up, during daily cleaning, spray the multi-functional mold remover on the corner of the bathroom, wipe with a rag, not only can take away the musty smell, but also leave a faint floral fragrance.

1. When the faucet in the bathroom is moldy, mix it with white vinegar and baking soda, soak it completely with toilet paper, wrap the faucet and stand still for half an hour, wipe it with a soft rag, or rinse it with running water.

2. Lemon can also clean the moldy wall well, and can also leave a faint lemon fragrance, squeeze the lemon juice on the moldy place, wait for 10 minutes to brush with a brush, and finally wipe the wall with a soft rag.

3. When there is mildew in the corner of the bathroom, it is necessary to spray it with 84 disinfectant, wait for 5 minutes and rinse it with water, pay attention to the cause of mildew in the moldy location, because of the problem of water storage, and sweep the water with a broom in time after taking a bath.

4. Most of the moldy conditions are caused by dampness, the ground or wall is in a wet state for a long time, pay attention to the dryness of the bathroom, when the mildew spot is serious, you can put the dehumidifier at home in the bathroom, and then take it away after working for an hour.

The most effective way to get rid of mildew spots with baking soda:Baking soda can remove mildew spots, and when there is a musty smell, you can scrub it with 20% concentration of baking soda, which can not only remove the mildew odor but also remove dirt. If you find that the tiles in the bathroom are damp, you should deal with it immediately, you can use a dehumidifier, use baking soda, and dip the clumped baking soda that is usually used for moisture absorption, dip some with a wrung out wet towel, and directly wipe the mold or stains on the wall.

Apply baking soda to the mold on your clothes, then apply some laundry detergent, soak it in water, and scrub it clean.

The magic of baking soda

1. To clean the scale, pour about 500 grams of baking soda solution with a concentration of 1% into the thermos, shake it gently, and the scale in the thermos can be removed. Sprinkle a layer of baking soda evenly on the towel, then turn on the electric iron, when the temperature reaches 100 degrees, rub back and forth on the wet towel, and when the water vapor is not visible, wipe off the baking soda, and the dirt at the bottom of the electric iron will be removed.

2. When yellowing, when the silk clothes are ironed, you can use a little baking soda to make a paste and apply it to the burnt yellow place, and after the water evaporates, then put on a wet towel to iron it, and the burnt yellow traces can disappear.

3. Deodorization, baking soda powder can absorb free acid in the air, and the odor produced by a lot of food decay feces comes from the acid in it, and after absorbing the acid, the odor will be eliminated or not obvious. It can be sprinkled on garbage cans, kitchen waste, toilets and other places.

After rubbing off the mold with a toothbrush, wipe the side with alcohol, and here are the steps:

Tools needed: toothbrush, alcohol, towel.

1. First prepare a toothbrush.

2. Use a toothbrush to rub the moldy area, and be careful not to add water.

3. After rubbing, find a towel and pour alcohol.

4. Use alcohol to wipe the moldy place, which not only has a cleaning effect, but also can volatilize without leaving traces.

5. After wiping, wait for the alcohol to evaporate.

6. After volatilization, it can be seen that the wall becomes clean and clean, and the effect is good.

The odor emitted by the family bathroom is an important source of pollution in the living room. The odorous gases emitted by the floor drain and toilet in the bathroom include hydrogen sulfide, ammonia, methyl mercaptan, indole, methane, ethane, etc., which not only have a peculiar odor, but also have strong toxicity, such as hydrogen sulfide. In order to eliminate the odor of the bathroom, some families take the spray of perfume, or hang an "air fragrance sticker" that releases the fragrance for a long time.

In fact, these methods are not advisable, and they mask another odor with one odor, without eliminating odor pollution from the source. Moreover, perfume or aromatic patch (box) is harmful to some people with allergies, which can cause allergic diseases, including asthma, itching, etc. In particular, synthetic fragrances are mostly organic compounds with certain toxicity.

Therefore, perfume spraying should not be used to mask the odor of the bathroom.

1 Place 1 cup of balsamic vinegar in the bathroom and the smell will disappear. Balsamic vinegar is generally valid for 6 to 7 days, that is, the balsamic vinegar is replaced every other week or so.

2 Deodorize cooling oil. Open the lid of a box of cooling oil and place it in a low place in the corner of the bathroom, and the odor can be removed. A box of cooling oil can be used for 2 months to 3 months.

3.Buy two jars of your favorite, insert dried flowers into the bottles, place them in the bathroom, and drop a few drops of perfume every once in a while. If possible, it is better to arrange flowers.

4.Lemon is the best deodorant, cut fresh lemon into slices, dry it and put it in the toilet to prevent mildew and odor. Be careful not to place the lemon slices directly on the ceramic surface so that the blot will not be easily removed.

5.Various seasonings are also good deodorants, such as spices, chili peppers, bay leaves, cinnamon, etc., which can not only make a good taste, but also exude a pleasant fragrance.

6.Greens and fruits are the best deodorizers. Such as pears, melons, small pumpkins, etc., put them on the toilet tank, which is not only environmentally friendly and beautiful, but also fragrant and natural.

It is worth noting that melons and fruits that act as deodorants should not be washed, and can be wiped with a dry cloth when needed, and they are easy to rot and deteriorate when washed with water.

7.Always check the vents in the restroom for blockages to keep them pumping well. If the natural ventilation effect is not good, arrange an air fan and exhaust it every 2-3 hours for about 15 minutes each time.

8.In the toilet with floor drain, a floor drain deodorizer can be installed at the mouth of the sewer to isolate the odor. Or cover the floor drain with a soft, elastic and non-breathable rubber sheet. Remove the shutter when draining the drain.

9.Keep the bathroom clean, insist on cleaning every day, remove garbage, and do not hang up washed clothes in the bathroom. Don't store dirty laundry in the bathroom.

The musty smell at home is too heavy to remove skillfully.

Just buy some of the sanitized ones!

Due to the large number of water stains in the bathroom, mold spots often appear in the gaps between the walls and tiles, especially in the wet season. In the rainy season, some owners find that there are often mildew spots on the walls of the bathroom at home, and the mirror will also be blurred because of many watermarks, and the mildew spots in the gaps of the tiles are particularly obvious. Is there any way to prevent the wall from getting moldy again, and what should be done about the areas that are prone to mold in the bathroom?

To prevent the recurrence of mildew spots, you can try the following methods: 1. Tiles. The walls of the bathroom are mostly tiled, and in order to keep them clean and shiny, they can be cleaned with a multi-purpose stain remover.

In the gaps of the tiles, you can use detergent to descale first, and then use a brush to brush a waterproof agent in the gaps. This prevents not only seepage, but also mold growth. 2. Glass.

Smooth mirrors and windows will be blurred due to long-term close contact with water. You can use a spray glass cleaner to spray a large X-shape on a whole piece of glass, then fold the wrung out rag and wipe it in one direction, and when the glass is dry, wipe it again with a dry cloth. Or wipe it with an old newspaper, the ink of the paper can make the glass shine as bright, and it can also wipe away stubborn dirt.

3. A faucet. Faucets, showers, etc., often get on with a variety of body soaps, shampoos, etc., and these detergents can make the chrome surface of the faucet dull. Spray on a cotton cloth with a mild detergent and gently wipe the faucet once a week.

Do not use acidic or abrasive detergents or wire brushes to wash faucets. 4. Toilet. Put an appropriate amount of water in the toilet, clean it with a toilet brush, pour about 5 10 ml of detergent or hydrochloric acid solution, apply it evenly with a brush and scrub it.

If the dirt is heavy, you can pour a little detergent to soak and then scrub until it is clean, and then rinse it with water. 5. Ceramic. Another convenient and eco-friendly way to clean your fixtures is with white vinegar and lemon peel.

Scrub the dirt on the surface of the sanitary ware first, and then wipe the surface of the sanitary ware with a soft cloth dipped in a little white vinegar or wipe it with lemon peel.

Mold on the wall is usually caused by moisture, and your situation shows that the waterproofing layer on the bathroom wall is broken, or it was not done well in the first place. Now, if you want to completely solve the problem, you must start from the bathroom to re-do waterproofing, but this problem is more troublesome, and you have to smash the wall tiles and other walls. If you don't do it this way, the mold problem is difficult to solve.

Because the original wall was not made waterproof, or it was poorly built. The water vapor in the bathroom is absorbed by the wall and then discharged outward, so the other side of the wall is moldy, and if there are blisters, it is a very bad situation. (1) Simple method, only the moldy and blistered wall plastering shovel off to see the bricks, but also wait for the wall moisture to go away (you can turn on the air conditioner to dehumidify for one or two days to speed up the method) The internal ventilation fan of the bathroom does not stop.

The wall is carefully built waterproof, (high-grade cement mortar plastering is also a waterproof method) and then scraped more than twice with special exterior wall plaster, oil wall paint, etc. It takes about 10 to 15 days from the commencement of the project to the completion of the project.

When the bathroom was first built, the waterproofing was not done well, which affected the wall next door. There were many of these problems in early buildings. There is no shortcut, only the root cause, the entire bathroom renovation, sanitary ware is not counted, about 3000 or so hard decoration costs.

What should I do if my walls are moldy?