A very annoying blue screen problem, may I ask the big guy, is this blue screen problem big?

You can replace 1 memory to try the 2 memory you are inserting now.

I will remove one and look at it for 2 days.

How big is your memory? How many graphics cards are there?

There are several reasons for the blue screen. Virus. The hardware is not enough.

I'm going to talk about you upgrading your down. It's best to put the hard drive all down. Then reinstall a better system, preferably without a cloned ,..Poorly said. Don't spray me, I can't do anything about it, you can try it.

Check to see if your hard drive cables are in good contact. Whether the memory module is plugged in.

The blue screen on the computer can be analyzed from two aspects:

First, there is a problem with the hardware, that is, the memory.

Second, software, there are many problems.

Solution: 1 Check the memory module, it is best to wipe it with a gold finger, if it is broken, replace the memory module.

2 Dual memory is not compatible Use the same brand of memory or only one memory.

3 Memory quality issues Replace the memory module.

4 Heat Dissipation Enhancement of heat dissipation inside the case.

5. The memory and motherboard are not plugged in properly or are not compatible with other hardware, etc.

6 There is a problem with the hard drive Replace the hard drive.

7 Driver Problems Reinstall the driver. If you are using a new system, you need to install the motherboard driver first.

8 Software Corruption Reinstall the software.

9 Software bugs are patched or with the latest version.

10 Software and system incompatibility Patch the software or try the system's compatibility mode.

11 Conflicts between software and software If you have recently installed any new software, try uninstalling it.

13 Virus Problems Antivirus.

14 Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so uninstall it.

15 There is a problem with the system itself Sometimes the operating system itself will have bugs, pay attention to install the official release of the upgrade program, like the SP patch, the best to play. If you can't reinstall the system or replace it with a different version of the system.

Installed with Super Bunny, Optimizer, Security Guard 360 and Rising are all compatible. It may be that your Warcraft is not compatible with other systems!

The system is so messy.,I think it's better to reinstall it.,By the way, don't forget to make a backup!!

1。If this is an accident, usually restart the computer and the symptoms will disappear!

2。Incomplete anti-virus (use anti-virus software, full scan and custom scan)!

3。Software conflicts, incompatibilities: redundant similar software installation, (360 Butler, software uninstall, find uninstall, again:

4。The computer system has stubborn viruses and Trojan horses or worms interfere with, or the system files have been lost (360 system emergency.

Rescue box or Kingsoft first aid kit, Kingsoft net shield, etc., any of them, full killing, and then: system repair).

6。There are new vulnerabilities waiting to be installed in the system (patched for high-risk and important, others are set to: ignore).

7。Poor contact and loose contact of the graphics card or memory CPU, or fan with dust cover, (unplug the eraser).

8。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

9。There is a bad comment plug-in on the computer! (Scan it out, clean it up immediately) or too much disk fragmentation, (System Tools), clean up the debris!

10。If it still doesn't work, the system files are missing! Or maybe there's a serious error in the system memory!

11。Try to press F8 after booting, press Enter, Enter, enter the safety mold Bright Formula, configure it correctly for the last time, and press it.

Try it! Or, go into safe mode, go to the desktop, and get a full antivirus!

12。Playing the game blue screen, generally the system does not support this game Liang Tang! (Change the game version or change the XP system).

Reinstall or upgrade to the latest version).

14。If it still doesn't work, you need to "one-click restore" the system or "reinstall the system"!

This answer is not copied from the Internet, all of it is me: "Liwang History", I have been "knowing" for a long time to summarize and practice myself, as well as the experience of the majority of netizens!

The blue screen is generally not a big problem, you can send it for repair and let him fix it, the problem is easy to solve.

Reinstall the system, the blue screen generally needs to reinstall the system.

Software or hardware issues can cause the blue screen phenomenon.

Suggestion: First, simply preliminarily rule out the influence of excessive hardware temperature and poor contact

Unplug the power cord of the main unit and open the main chassis;

clean up the dust; Replace the thermal paste on the cooler of the CPU, graphics card and other chips;

Remove the memory module, wipe the golden contacts with an eraser (if the rust cannot be removed, clean it with sandpaper or metal sheet), and then install it (if there is more than 1 memory, only install 1 at a time, test them separately); If you have a discrete graphics card, clean the gold contacts after removing it, and then install it;

Reseat the data plug and power plug of the SATA IDE SATA-E interface hard drive; Remove the hard disk with the MSATA connector, clean the gold contacts with an eraser (if the rust cannot be removed, clean it with sandpaper or metal sheets), and then install it;

After the above steps are done, plug in the power cord of the host and turn on the computer to see if it is normal.

2. If it is still not normal, it is recommended:

Use a PE system USB flash drive (or CD-ROM) with hard disk detection and repair tools to detect the hard disk where the system is located in the PE environment, repair the problem first, and replace the hard disk where the system is located if the problem cannot be repaired successfully;

Use the original Microsoft Windows system installation image file to make a USB flash drive (or CD), format the system partition, and reinstall the operating system;

Use speccy or cracked AIDA64 to detect the brand and model of the hardware, and then install the hardware driver officially provided by the hardware, corresponding to the hardware model and version, corresponding to the operating system and the number of digits according to the test results.

3. Boot into the system interface, install and run 1-2 relatively large applications (or do not install applications first, only run the system's own applications) for testing, if it is still not normal, you need to use the elimination method to troubleshoot the hardware problems one by one.

Try running the disk troublefinder. Method: Open"My computer", right-click the drive letter, and then select it"attributes"-"tools"-"Check for errors"-"Start checking", prompting two items of the disk check option"Automatically remediate file system errors"with"Scans and tries to recover bad sectors"Check them all and click on them"Get started".

It's a good idea to check all disks in this way. Check the system disk to be restarted (When asked whether to check when asked to restart, click.)"Yes"After restarting, it will be checked with a blue screen, wait patiently.

Check the hard disk handle, it is estimated that the hard disk has bad sectors

Reinstalling the graphics driver will usually solve this problem.

The causes of blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. Workaround:

1. The cause of the virus. Use PC Manager to disinfect the virus.

2. Reasons for memory. Use an eraser to wipe the gold finger of the memory module and wipe off the oxide layer to ensure that the memory module is installed and running normally.

3. The chassis is not clean. The CPU fan has too much dust to run normally, causing the CPU temperature to be too high, so use a brush or hair dryer to clean up the dust on the inner wall of the case, the CPU fan, the graphics card fan, and the motherboard.

4. There is also a possibility that the system is unstable, at this time, you need to restart the computer and press F8 to enter the startup menu item, select"Boot to the last correct configuration"。