Reinstall the window7 system,Suddenly shut down and restart when installing the driver,That s it,Ask

There is a problem with the ghost file or a problem with the memory.

Clean and maintain the memory, graphics card, and power supply.

Scan all disks for logical errors.

Once the ghost integrity is determined (reinstall the system).

When reinstalling the system, Windows fails to boot and change the hardware or software, the steps to solve the problem are as follows: (The demonstration uses an ASUS notebook, and the operation is roughly the same for other brands of computers).

1. Enter the PE system, turn on my computer and enter the C drive.

2. Open cmd input: bcdedit set osdevice boot, and then press the enter key to wait for the operation to complete.

3. Continue typing: bcdedit set device boot, then press the enter key and wait for completion.

4. Continue to enter the command in Figure 3: bcdedit set detecthal 1, and then press enter.

5. Finally, restart the computer.

Summary. In this case: 1. After turning on the machine, see if the machine is running normally, if it is running normally, you need to reinstall the system to solve it.

2. Use the floppy disk pass software to extract the image file into the ghost folder in the system disk of the U disk that has been made. 3. Set the U disk system disk as the first startup item. For example:

1) Dell computer, press F2 when booted up, enter the startup item settings. 2) Use the keyboard arrow keys to select the USB flash drive and press enter after starting. 4. Enter the U disk system menu.

5. Select the previous serial number 4 or use the arrow keys to move to the installation system directory, and press enter.

What should I do if my desktop computer suddenly shuts down in the middle of reinstalling the system and installing drivers?

In this case: 1. After turning on the machine, see if the machine is running normally, if it is running normally, you need to reinstall the system to solve it. 2. If the machine is not running properly, the first task is to solve the hardware failure and then install the system.

Correct installation method: 1. Go to the system ****win7 image file. 2. Use the floppy disk pass software to extract the image file from the orange shen into the ghost folder in the system disk of the U disk that has been made.

3. Set the U disk system disk as the first startup item. For example: 1) Dell computer, press F2 when booted to enter the startup item settings.

2) Use the keyboard arrow keys to select the USB flash drive and return to the circle after starting. 4. Enter the U disk system menu. 5. Select the previous serial number 4 or use the arrow keys to move to the installation system directory, and press enter.

I'm sorry I don't understand, but can you elaborate on that?

Check for hardware failures and use Device Manager to see which hardware devices are installed on your computer, set device properties, install or update drivers, and deactivate or uninstall devices. Right-click on My Computer on the desktop, open the Properties window, switch to the Hardware Options page, and click the Device Manager button to enter the window, which shows all the hardware devices installed on the local computer, such as optical storage devices, CPUs, hard disks, monitors, graphics cards, network cards, modems, etc.

After assembling the computer and installing the win7 system, boot to start windows and restart,Help。

1.If you have recently added new hardware, you may stop the hard disk output due to the lack of power supply power and cause power protection, but because the load is lightened when the power supply stops output, then the power slap high starts again. Workaround:

Now replace it with a high-quality high-power computer power supply. 2. Check the heat dissipation of the CPU, the CPU temperature is too high instantly, and it will also restart. Workaround:

Change a better fan 3, C drive file is damaged, accidentally delete the XP file by mistake. Workaround: Redo the system.

4. Some hardware is incompatible, the most common is the graphics card, the driver is wrong, etc. Solution: Redo the system or uninstall the graphics card driver in safe mode, find the original disk and reinstall it.

5. The most unlikely problem, hehe, whether the voltage in your home is stable. Solution: I really don't know about this branch ruler, I haven't encountered it, Li A: If it is, then I have to discuss it with the power supply bureau.