The bedroom has wooden floors, and how to decorate the corners of the walls

To decorate with baseboards, cover the gap between the floor and the wall, and use a closing strip if you don't need a baseboard, made of solid wood, polymer, and aluminum alloy.

1. Before paving the solid wood floor, because the wooden keel is easy to be damp and insects, some desiccant and insect powder should be sprinkled in the gaps between the wooden keels, and some camphor wood blocks can also be sprinkled to prevent the wooden keel from being damp and moth-eaten.

2. If the paving of the solid wood floor needs to be made of plywood as a cushion, the plywood should be sawn into small pieces with a size of millimeters or millimeters, and then the small wooden blocks of these plywood are fixed on the wooden keel with wooden keel nails, and after all the plywood cushions are paved, the level should be checked again according to the standard of 3 millimeters per 2 meters of height difference.

3. Lay the moisture-proof film on the wooden keel, and the junction between the moisture-proof film should overlap 50 mm and be glued with tape to ensure the integrity and firmness of the moisture-proof film laying, and in addition, the moisture-proof film should be rolled up 50 mm at the corners of the four walls.

4. The installation of the floor is generally installed from the half facing the door, so that at the end of the installation, the size of the floor is not neat, and the floor needs to be sawn to install, because the other half of the house usually places various furniture, so the uneven floor will also be blocked by the furniture, which will not affect the overall appearance.

5. Before installing the solid wood floor, the installer should check each piece of the floor that is about to be installed, and if it is found that there are defective products or traces of wear on the surface of the floor, they should be picked out and not used, and finally these floors will be packaged and returned to the factory for replacement. In addition, through the inspection and selection before installation, the installer can also artificially classify the pattern and color of the floor, so as to avoid the problem of color difference to the greatest extent.

Hello, there are the following steps: 1. First of all, starting from the corner of the wall, lay the side of the floor with a groove against the wall, and insert an 8 mm wooden wedge between the floor and the wall to make the floor have a retractable space. 2. After laying the first row, lay the remaining planks in the second row.

3. Use a ruler to measure the amount of friends to ensure that the floor of the first two rows is straight. Hono 4, now start gluing, this step is very important, on both sides of the length of each floor. Punch waterproof glue into the groove, and squeeze out the glue when assembling the floor and wipe it off immediately with a damp cloth.

5. Knock the floor tightly with a tapping board, taking care not to break the tongue edge of the floor. 6. The last row of floors is often narrower than the other floors, and the last board and the edge of the floor below are opposite the edges, and the distance from the wall is drawn out with a pencil (plus 8 mm of separation from the wall) and sawed off. 7. Put the sawed floor into the last row with a pull-back hook, and the floor is basically paved.

8. Remember that there must be an 8 mm telescopic separation between the floor and any pipes.

The corner is one of the more overlooked parts of our home decoration, but its decoration is just as important. If you want to make the corners of your home look more pleasing to the eye, consider using wooden flooring for treatment. So, how to deal with the wooden floor in the corner?

Here are some ways to do it.

1. Sticking to the wooden rock floor.

Veneer flooring is a relatively simple and easy-to-operate method. Cut the wooden floor to the appropriate size and then glue or tape it to the corner. You can choose different colors and patterns of wood flooring according to your preferences to create a unique corner decoration style.

This method of non-sliding has high requirements for the flatness of the wall, and if the wall is uneven, it is difficult to achieve a better effect.

2. Make wooden strips.

To make a wooden strip, you need to prepare some wooden strips, make them to the appropriate length, and then glue or nail them to the corners of the wall. This method is suitable for uneven walls, and the wooden strips can play a leveling role, and can also increase the three-dimensional effect of the corners. Moreover, the thickness and length of the wooden strips can also be selected and customized according to needs, which is more flexible.

3. Install the planks.

If the corners are long, installing planks is a better option. Start by measuring the size of the corners, buy enough boards, and then fix the boards to the corners with glue or nails. This method is more effective and durable, but it requires precise measurement and cutting.

Fourth, draw the pattern of the wooden floor.

This method requires you to have good drawing skills. First, you'll need to create a pattern on the wooden floor that matches the size of the corners, by painting or carving. Then, the finished wooden floor is glued to the corner of the wall according to the needs of the pattern.

This method not only serves a decorative effect, but also enhances the personalization and artistic sense of the corner decoration.

In short, using wooden floors to decorate the corners of the wall can have a good effect, but it is also necessary to consider which method to choose according to the actual situation. If you're inexperienced or unsure if it's right for your corner, it's best to have a professional decorator do it.

Will use a right-angle buckle to close the edges.