How to construct the wall wooden floor? How to lay wooden floors

1. The pavement scheme should be constant.

For each stadium, or theater stage, what materials to pave, and how to pave, are determined according to the actual parameters of the sports venue and the investment budget. Therefore, once the sports wood floor paving scheme is decided, it should not be changed easily.

Frequent changes to the design and construction plan of sports wood flooring will cause additional investment and even affect the construction period. Therefore, in the design of sports wood floor paving scheme, it is necessary to communicate and coordinate with sports wood floor manufacturers, clarify standards, and avoid unnecessary problems.

2. Customized products should be in advance.

The overall structure of the sports wood floor is basically all solid wood structure, and the moisture content of the floor will be done according to the climatic conditions and moisture content changes of the installation project site during production, which is generally about 6%-14% on average. Before ordering sports wood flooring, it is important to allow sufficient time for production in order to ensure the quality of the flooring.

3. Avoid cross construction.

Cross construction, that is, the paving of sports wood floors, is carried out at the same time as other construction projects of stadiums and conflicts with each other. The sports wood floor paving project should avoid cross construction, so as to affect the smooth progress of the sports wood floor pavement, or the construction of other stadium construction projects destroys the paved sports wood floor floor.

4. Supervision and acceptance should be involved.

Although it is said that the installation project of sports wood flooring is operated by the pavement engineer of the sports wood floor manufacturer. However, the stadium contractor and Party A should also arrange a special person to be responsible for tracking and supervision, and solve the problems in the installation of sports wood flooring in a timely manner.

Look at what the wall is.

Home improvement or tooling!

Generally directly on the wall.

Wrap the mouth with a plastic edge strip.

It can be done very quickly with an air nail gun.

Pay attention to the pattern. Kiss.

Other than that. Cork floors are convenient on the wall.

Can be glued with glue.

01 In order to ensure the effectiveness of laying, you need to prepare in advance. First of all, everyone should clean up the construction site, remove all irrelevant things, and clean up the garbage on the ground, including every corner. Then the ground is leveled, the horizontal error can not exceed 2mm, and if it is exceeded, it is necessary to find a way to level.

If the ground is uneven, of course, the foot feeling will not be good after the floor is paved. Then it is to trim the protruding or uneven parts of the ground such as edges and corners.

02 Wooden floors are prone to arching and deformation after moisture, in order to avoid this situation, we need to treat the ground with moisture. A common treatment method is to lay a moisture-proof layer on the floor, which can prevent the floor from getting damp in the future. The moisture barrier should be paved and the joints should be close together.

03 Once you're ready, it's time to start laying the floor. In order to make the effect of the floor more beautiful, it is best to pre-lay it first, divide part of the floor into two, and see it according to the size. Before sawing the floor, you can open all the floors and pick out the problematic or defective floors for sawing, which can effectively make full use of the local problematic floors without excessive loss.

Don't come up and take the floor and saw, that will increase the loss. The place where the floor is sawn must be selected in a place where tiles are easy to take care of, such as a balcony, otherwise the splattered wood ash will enter everywhere and be difficult to clean.

04 We all know that wood flooring has the natural properties of thermal expansion and cold contraction, in order to avoid deformation caused by extrusion between the floor, we need to reserve expansion joints at the part where the floor and the wall are in contact before laying the floor, so as to avoid the floor bulging. The size of the expansion joint is generally related to the expansion coefficient of the floor.

05 After everything is ready, you can lay the floor, the common laying method is to lay a long board next to a short board, the reason for this is to make the floor lay firm and not easy to loosen, the floor should be knocked with tools after the floor is assembled. Then down is the connection, which is generally covered with floor strips. But it can also be filled with glass glue, depending on what you like.

After the floor is laid, it is necessary to check it again and fix any imperfections.

06 Then it's time for the final process. It is the installation of the baseboard, and the joints to be made are tight and flush. And make sure that you can press down the cracks in the floor wall.

After the floor is laid, the next step is to install the strip, generally the floor is higher than the ground to use the high and low strip, the floor and the ground are as flat as this kind of flat strip.

<> steps of laying wooden floors are divided into 9 steps: 1. Sweep the ground; 2. Determine the direction; 3. Hit the keel; 4. Laying moisture-proof mats; 5. Floor pre-paving; 6. Installing the floor; 7. reserving a gap; 8. installing a baseboard; 9. Install the bead.

1. Cleaning the ground: clean the ground and avoid the impact of floating dust on future life.

Second, scatter and determine the direction: determine the direction of laying the wooden floor, generally facing the south room, mainly in the direction of the north and south eggplant digging group, that is, the vertical direction of the floor to the direction of the sunlight, that is, the north-south direction of the floor is the most common.

3. Keel: The keel should be planed on all sides and dried; The horizontal plane of the keel should be flat, fixed firmly, and special keel nails should be used. The ground can be sprinkled with some insect-proof and moisture-proof materials, such as camphor wood blocks.

4. Lay moisture-proof mats: The use of thick moisture-proof pads can isolate the moisture of the ground and avoid the deformation of the floor due to the moisture of the ground in daily use.

Fifth, the floor pre-paving: through the pre-paving can reduce the impact of color difference on the pavement effect, to avoid the occurrence of large flowers, too large contrast of some situations, for some appearance has an impact, can be laid to the bottom of the bed, the bottom of the cabinet and other positions.

Sixth, the installation of the floor: the installation of wooden floor nails must use floor nails, can not be directly driven into the floor, first use an electric drill to drill holes and then use floor nails to fix the wooden floor on the keel.

7. Reserve gaps: Pay attention to the gaps in the laying of wooden floors, so as to ensure the expansion space of the floor in the later stage and avoid the appearance of arching problems.

8. Installation of baseboards: After the wooden floor is laid and the surrounding areas such as walls and door stones, it is necessary to reserve a gap of 8-12 mm to reserve space for the expansion of the floor, and cover the gaps through the installation of baseboards.

9. Installation of beads: The joints at the joints of the joints between the wooden floor laying and the door stones, floor tiles, etc., need to be installed with beads or edge strips to cover the joints.