How to waterproof cracks in fish ponds, and whether outdoor fish ponds should be waterproofed?

Cracks in fish ponds can be waterproofed with polymer waterproofing membranes, and asphalt (toxins) is forbidden to be waterproofed.

Construction of turtle ponds:

1. You should choose a place that is sheltered from the wind, sunny and convenient for irrigation to raise turtle ponds

1) Land. Generally, the water depth is 1-meter, and the slope of the bottom of the pool is 1:2 or 1:

3. Set up inlets and outlets. In the pond, duckweed, water peanuts or water hyacinth are stocked with about 1 3 of the pond area, and the wall is built around the pond with a height of 30 cm, so as to prevent the turtle from escaping. Leave an open space about 1 meter long and 1 meter wide in the wall (a few can be left if the area is large); Or leave a small island in the pond about 5% of the total area, and accumulate an appropriate amount of sand on the open river island for the turtle to lay eggs.

2) Concrete floor. The depth of the pond is meters, the depth of the water is meters, the soil is 20 centimeters, the pool should have a convenient inlet and outlet for drainage and irrigation, and a small island is set up in the pool, and weeds grow on the island, and sand piles are placed in the grass. The stocking density of adult turtle ponds is generally 5-7 per square meter, and the maximum is not more than 10.

2. Set aside a strip of land around the turtle and turtle pond, plant some small grasses and trees, and pave sand belts. In this way, it can not only adjust the temperature around the turtle and turtle pond, for the turtle and turtle to go ashore in summer for shade, but also for their egg laying and drying their backs at low temperatures.

3. A small amount (about 1 3) of water hyacinth or water floating lotus is implanted in the turtle and turtle pond, which can allow it to absorb harmful heavy metals and harmful substances in the water body, inhibit the concentration of ammonia nitrogen in the water, and control the fertility of the water body. At the same time, the water temperature can be lowered and stabilized in summer. In addition, it also provides a place for young turtles and turtles to roost and bask their backs.

For turtles and turtles, it is a place for shade and mating.

Tilapia, crucian carp, mandarin fish and blackfish are raised in the pond, and about one to two fish per square meter are stocked, which has the advantage of turning the sediment, accelerating the decomposition of organic matter, and eating some turtle and turtle feces and some other fish that are difficult to digest algae, accelerating the energy cycle of the water body and maintaining the ecological balance of the water body.

If there are cracks, you need to fill them first, and then use professional waterproofing, it is recommended that the wall waterproof treasure in the Kelin waterproof expert is safe and non-toxic.

Nowadays, there are many small indoor fish ponds, but the most feared thing is the wall caused by water seepage, and the downstairs ceiling is peeled, moldy, and damaged.

The cause of water seepage is that the cement layer itself will penetrate, fine cracks, corner joints, joints between drainage pipes and cement; Tile joints, corner joints.

The fish pond is divided into two types: cement surface and tile surface. There are many waterproofing membranes and waterproof coatings for waterproofing, but these membrane waterproof layers will be aged, damaged, and fallen off with time, water pressure, and water erosion.

Solution: Now the latest waterproofing material can solve your problem. a.

The black gold steel waterproof guard only needs to spray the cement surface as a whole, and it can reach the waterproof after drying. This is a kind of nano waterproof material is formed by penetrating into the substrate to form a chemical reaction to form a waterproof layer, as long as the substrate is intact and not damaged, and the waterproof effect is not cracked. b.

Tile fish pond, the tile itself is waterproof, as long as there are cracks in the tile gaps, small holes, this as long as the tile gaps are sprayed as a whole, and the cracks are repaired with the joint treasure after drying, and the holes can be done.

It depends on your needs, as well as the local land seepage needs. There's also the size of the fish pond, and how you get the water. Usually fish ponds are to be made to prevent leakage.

The fish pond is not waterproof, the water will leak through the fish pond masonry to the surroundings, and there will be an erosive effect on the masonry itself, if it is a stone, it is better, if it is an ordinary brick, it is not a water-resistant material.

It is recommended to do anti-leakage measures, such as anti-seepage membrane, and then make traditional pond mud for fish ponds, which can better play the role of anti-leakage.

The main reason is that if the fish pond leaks, and then replenish the water, the water resources are wasted, and the long-term leakage of water will cause changes to the surrounding soil quality, and if there are buildings nearby, there will be some impact on the building foundation. In addition, bait and disinfectants are also put into the fish pond, which will also pollute the surrounding groundwater.

Especially in small fish ponds, you may not be able to grasp the speed of leakage, and it may happen that the water leaks completely overnight. Moreover, the fish pond water in the small yard is usually replenished with groundwater, and the groundwater needs to enter the fish pond after basking in the sun, and the low temperature is easy to make the fish sick.

Therefore, it is recommended to do a good job of anti-leakage measures, waterproof can be used, other anti-leakage measures can also be used, and rapid water seepage in the fish pond is not a good thing. Several fish ponds of relatives' families need to spend tens of thousands of yuan every year to buy water from the Yellow River Water Affairs. Although small fish ponds do not use much water, it is difficult to grasp the amount of leakage without seepage prevention.

Other netizens' views.

It is recommended to do waterproofing.

Waterproof must not be selected at will, need to choose non-toxic and harmless waterproof materials, generally choose polymer cement-based waterproof materials, this waterproof material has two characteristics of flexibility and waterproof, used in fish ponds is very good.

1. Waterproof construction of fish ponds.

1. Grassroots treatment.

Treating the base layer is the primary process of waterproofing, mainly to ensure that the base surface is clean and flat, free of dust, dirt and debris, etc., and the places with gaps need to be filled and leveled.

It also needs to be done, otherwise it will have an impact if it leaks even outdoors!

The waterproofing treatment of fish ponds can generally be done in the following ways:

1.Use waterproof coatings: First of all, coating waterproof coatings on the inner and outer surfaces of the fish pond can effectively prevent the penetration of water and protect the fish pond from water damage.

2.Use waterproof felt: Place waterproof felts on the inside and outside surfaces of the fish pond to prevent water from seeping into the fish pond and protect it from water damage.

3.Use anti-cement slurry: Applying anti-cement slurry on the inner and outer surfaces of the fish pond can effectively prevent water penetration and protect the fish pond from damage caused by the water.

4.Use a layer of caulk: Filling the inner and outer surfaces of the fish pond with a layer of caulk can effectively prevent water penetration and protect the fish pond from water damage.

Kiss! Hello, happy to answer your <>

How to make a waterproof treatment method for a good fish pond is as follows: 1. Treat the base surface of the fish pond well, repair the gaps, and keep it flat, clean and seamless. 2. Apply the polymer cement evenly on the base surface, not too thick.

3. 24 hours after the construction is completed, cover the inside of the fish pond with a damp cloth. 3. The water storage is used for closed water test, the height cannot be less than 20 cm, the test time is 48 hours, and a protective layer of cement mortar is painted. 2. What aspects of the fish pond need to be waterproofed 1. If you want to do waterproofing inside the fish pond, you should generally choose to use polymer cement to do waterproofing, this material not only has no harm to the fish, but also will not pollute the water source, and the construction is simpler.

Before doing waterproofing, you need to clean the base surface first, if you find that there are gaps and gaps in the opening of tung burning, voids and other parts, you need to use cement mortar to repair, and the yin and yang corner position side needs to be painted into an arc, and you need to keep the base surface wet, and there must be no open water. 2. Next, the polymer cement should be applied to the base surface, and when brushing, it must be evenly applied, and it cannot be smeared too thickly, and if it is too thick, it will be easy to crack after curing. The front and back sides of the painting process should be kept vertical and intersecting to ensure that the inside of the fish pond can be painted in place.

Hope mine can help you <>

Do you have any other questions?

The best way to do waterproofing in a fish pond is as follows:

1. If it is a fish pond that has been used, it is necessary to drain the internal water and dry the fish pond, which generally takes 48 hours.

2. Clean the fish pond with a steel wool ball on the surface of the fish pond to remove the dirt and debris on the surface of the fish pond. If some paint is used on the surface of the fish pond, the surface needs to be removed with a material that specifically removes the paint. When doing the removal work, you need to take protective measures, such as gloves, goggles, etc., and then rinse the entire fish pond area with clean water.

3. Check whether the fish pond has cracks or damaged songs, and ensure the dryness of the fish pond before doing waterproof construction.

4. Check the instruction manual of the waterproof product, especially when you need to use different waterproof materials for wild spikes, you need to check whether the two materials are compatible.

The material used for the waterproofing of the fish pond

The general waterproof construction needs to do 2 or 3 times of waterproof coating construction to keep the base surface solid, dry and solid, flat, no falling off, no delamination. The area where cracks appear needs to be filled with cement mortar and smoothed the base surface. After the waterproof coating is completed, it can be dried naturally, and the waterproof coating has excellent waterproof performance, which can contact moisture for a long time, isolate moisture, and the waterproof layer does not fall off or hollow.

Waterproof coatings need to choose green and environmentally friendly products, which are suitable for waterproof construction in fish ponds, pools and other areas.

It has good waterproof and acid and alkali resistance, and can effectively prevent mildew and corrosion. It has good impermeability and pressure resistance, and can be used for waterproof and moisture-proof treatment of fish ponds. In the case of large water storage, the waterproof performance will not be changed.

The waterproof layer has strong adhesion ability to the base surface, and it is not peeling or hollowing. After the waterproof construction is done, it will not affect the construction of facing materials such as tiles.

Now that the living conditions are better, many people will build a fish pond in their own homes. How to make the fish pond waterproof? How to choose the right fish tank? Follow me to find out!

First, clean and smooth the base surface and keep it dry. Then, paint the waterproof material, brush along the periphery, do not miss the brush, try to paint twice, not too thick, too thick is prone to cracks, after applying, pay attention to the maintenance of the waterproof layer. Finally, after the waterproof coating is dried, a layer of cement mortar can be smeared.

How to choose the right fish tank?

Before buying a fish tank, you should determine the species of fish you raise, what material is suitable for the fish tank, and then choose the right fish tank according to the approximate size of the fish when they grow up.

The fish tanks on the market will be rich in shape and good-looking, but if there are elderly people and children at home, it is recommended to choose a fish tank with a curved angle as much as possible.

When choosing the weight and size of the fish tank, you should also consider the load-bearing capacity of your living environment and the load-bearing capacity of the floor, which can reduce the danger of using the fish tank.

Fish in the fish tank must be discharged, and the leakage pressure of the water will be larger, so when choosing a fish tank, we should not only pay attention to the load-bearing capacity of the fish tank, but also consider the pressure resistance of the fish tank. If the pressure resistance of the fish tank is not very good, it is easy to have cracks or leaks during use. It is recommended that when purchasing, try to choose a fish tank with thick glass thickness.

If you are raising fish for the first time, when choosing, it is recommended to try to choose a ground tank, so that when changing the water or feeding the fish, you can reduce a lot of unnecessary troubles and dangers, and you can buy other styles of fish tanks after more experience. When choosing, try to choose a fish tank with a better filtration system, which can automatically decompose fish excrement and excess fish feed.

Summary: After reading the above, I believe you have a certain understanding of how to choose a fish tank correctly. If you want to know more about it, please continue to ******, and more exciting content will be presented to you in the future.

<> "Many families will design fish ponds in their yards, and fish ponds should be designed with waterproof treatment. So, how to do fish pond waterproofing? Let's take a look.

How to do waterproofing fish ponds.

1. First bend the base surface to ensure that the surface is clean, smooth and dust-free.

2. If there are cracks on the surface, you can smooth it with cement mortar first, and the yin and yang corners should also be wiped into an arc shape.

3. Prepare the polymer waterproof coating, ensure that the strength is uniform when brushing, and the brushing should not be too thick, so as to prevent cracks after drying.

4. After the waterproofing is done, it is necessary to maintain the construction, which can be covered with a wet cloth or sprinkled with water on the surface.

How to design a fish pond.

1. The location of the fish pond.

When designing, first of all, we must choose a suitable location, which should be selected in a spacious place, otherwise if the location is too narrow, the fish pond will be small, and it will also affect the light of the fish pond. At the same time, it is also necessary to choose a sun-facing position to carry the shirt, because only sufficient sunlight can keep the fish alive.

2. The surrounding layout of the fish pond.

In addition, it is also necessary to pay attention to the design of the surrounding environment of the fish pond, and a small bridge landscape can be built in the fish pond, which is not only beautiful, but also provides shade and leisure space for the fish.

3. The shape of the fish pond.

The shape of the fish pond is very important, it is related to the overall aesthetics, usually there are square, round, if the space is larger, it can be made into an oval, the shape design is larger. The shape of the fish pond can also be designed according to your own preferences, and many people will also design it as a non-standard fish pond, which is also a good design.

4. Objects in the fish pond.

Many objects can be placed in the fish pond, such as lotus flowers, landscape stones, and other green plants, etc., if you place viewing stones, you can increase the overall ornamentality.

5. The water quality of the fish pond.

The water quality of the fish pond is very important, in addition to keeping it clean and tidy, you should also pay attention to the composition of the water. In order to ensure the life of the fish, a filter can be added to the fish pond to ensure the vitality of the fish.

Summary: The above is about how to do the waterproofing of the fish pond, I believe everyone understands it! It is best to ask a professional person to help with the design of the fish pond, otherwise the fish pond design is not good, and it will be difficult to raise fish.