Nokia E63 boots up and automatically texts what s going on

The first reason is; You have a message that has not been sent, and a message icon has been appearing in the outbox, you can check in the outbox to see if there is a message you have not sent before.

The second reason is; First of all, S60 V3 is not so easy to be poisoned.,What program can you install?,And that program has this plug-in.,You see what programs you've installed.,You don't have to delete what you know or recognize.,(Like QQ、Baiyue、Big head、UC,) I don't know the name of the mountain to delete it.。

If you confirm that this is the second reason, first put your phone into airplane mode.

I hope your 63 is okay, I love 63 too

I think the landlord should confirm whether the text message was not sent or was automatically sent when the phone was turned on!! If the SMS is not sent, then the icon of sending will always exist, and it will be operated in the outbox; And if it's unsolicited, then, I'm sorry to tell you, your phone is probably poisoned ......It is recommended to disinfect the virus, or the grid machine!!

Poisoned, quickly restore the factory settings, the whole machine can be formatted, pay attention to the anti-virus is useless.

Is it Nokia?。。 Hehehe,This is a problem with the phone.,It is recommended that you upgrade to other firmware versions.,Nuo Ji is now a thief bad.,Send a message to subscribe to Nuo Kee's article when you turn it off and turn it on.。。。 It is recommended to go to Symbian to find the corresponding version and upgrade the firmware.

If it weren't for the advice of Fa to Noji, install a fee buster, so that the malware could be prevented from sending messages.

There are also some sent in the background, and it is recommended to install and deduct the nemesis.

If you don't have to do anything, you can learn a lot by going to Saipan.

The easiest factory reset, which is available in the settings.

In fact, there are many reasons why you can't send text messages:

1. If you want to know what the center number is, please consult the network operator (1860 or 10010).

2. Your mobile phone is in arrears, and the solution is to pay off the fee.

3. The short message memory in the mobile phone is full, and the text message can no longer be saved, even if it is an information report, the solution is to delete the read text message.

4. In your mobile phone settings, there is one item, that is, the network selection of short message settings, I think your mobile phone is estimated to be this reason: automatic selection & GPRS network only & GMS network only, if you choose to be only GPRS network, you will not be able to send text messages, my classmates used to be such a reason, after passing my debugging, you can send text messages normally, you might as well try it.

5.The mobile phone can't send text messages, if you play ** normally, it's not a card problem, but the information service center number in your mobile phone you may delete or change, so you can't send text messages, the service center number is: 8613800 (area code) 500 or you ask the local mobile company yourself.

Call ** to 10086 and tell him that I can't send text messages, he will restart the SMS system on your mobile phone, I used to have this problem, just start it again, hehe.

It may be that the information center set by the SMS is not filled in, generally +861380 four digits of your local area code 500, such as Changsha is +8013800731500

Direct 10086 consultation is good.

Possible causes and solutions for the above situations:

1. If the number of the mobile phone information center is wrong, dial 10086 or 10010 to request the number and change it in the information - options - settings - short message - information center.

Second, the mobile phone card installed in 66 has not opened the SMS function, and the manual service of calling the customer service has been activated.

Third, the mobile phone system problems, back up the important ones in the mobile phone, such as: contacts, text messages, etc., the standby interface input 7370 for the grid, if there is a password to enter the 12345, after the phone restarts about a few minutes may be ten minutes or three or four minutes, do not move him, the phone is turned on to indicate that the grid is completed.

A few possible reasons:

1. Software conflicts caused by newly installed software on mobile phones. Uninstall the recently installed software and try restarting your phone.

2. When you send a text message, the location of the mobile phone has an impact on the signal. Try texting from a different place.

3. The mobile phone system is wrong, this is the problem of the mobile phone. It can be solved by the method of a hard grid machine.

If you need a hard grid machine method, please ask!

Hello:3At the same time, blocked harassment** and blacklisted call logs can be viewed in the "**" column:

4.In the blacklist, you can add numbers to intercept by yourself, and you can add three ways manually in "Other Add Methods":

a. In addition, the butler also provides 4 interception modes for users to choose, and at the same time, you can also set a personalized and customized interception mode according to your own needs.

b. In the "Interception Tone", the housekeeper also provides 4 kinds of interception reply tones for you to choose from.

c. The "blacklist and whitelist backup and recovery function" provided by the housekeeper is convenient for you to easily and effectively restore the blacklist and whitelist in one step after changing your mobile phone, saving you the trouble of re-operation.

If you have any other questions, please come to the mobile phone manager platform for consultation, we will solve it for you as soon as possible

360 Mobile Guard is very easy to use.

360 Security Guard, which is used for dentsu or mobile version, can also filter malicious calls.

A few possible reasons:

1. Software conflicts caused by newly installed software on mobile phones. Uninstall the recently installed software and try restarting your phone.

2. When you send a text message, the location of the mobile phone has an impact on the signal. Try texting from a different place.

3. The mobile phone system is wrong, this is the problem of the mobile phone. It can be solved by the method of a hard grid machine.

If you need a hard grid machine method, please ask!

Usually, flashing a phone refers to "restoring to factory settings", that is, "grid phone". If you're about to do a "factory reset", read on below; If not, skip it:

e63: After flashing this phone, contacts (**this) and text messages will be forcibly deleted when the system is refreshed (as is the case with most phones!). ), but you can connect the computer to the computer through a data cable before flashing it (you must export the contacts first and then flash it, if you do the opposite, you will not be able to backup and restore contacts and text messages). Here's how:

2.Connect your phone to the computer with a cable or Bluetooth, and if the connection is successful, the OVI program will automatically discover the device.

4.Click [Export Contact] (or a button similar to that) to pop up the export wizard, and output the save path according to the prompts (e.g., C, D, E disk, fill in **, or click "Browse" to save).

5.Click the "Export" or similar button after setting the crack, and the program will automatically export the contacts and text messages to the specified path folder.

That's it, and you're done!

6.Flash your phone.

7.Recover data: Connect the newly flashed phone to the computer, open the OVI program, select the "Import" function, and the program prompts "Overwrite? or similar, ignore him, click the "OK" button, and the program prompts you to select the import file.

8.Click "Browse", select the file you just exported, and "OK" after selection, and the program will automatically restore the contacts and text messages in the file to the newly swiped phone.

At this point, the data recovery job is complete!

9.Turn on the phone again to check whether it is restored, if the contacts are restored to the state before flashing, it means that the recovery is successful.

At this point, all data backup and recovery work is completed!

No, as long as you don't have a machine, you won't.

Of course not, hehe, I'm Brother Lin.

Lamborghini.