Who can talk about the market prospect analysis of aerated concrete equipment?

Looking at the global economic environment, I would like to express my views on the actual situation in China: 1There are too many manufacturers of aerated block equipment, this year will definitely be a cold winter, after the big waves and sand, there will be many manufacturers who cannot make ends meet or even close their doors; 2 Manufacturers of aerated blocks will face:

If you don't sell it, you don't have a market, you don't have cash when you sell it, the more you sell it, the more difficult it is to settle, and in the end it will crush many manufacturers, which is also the biggest problem faced by many manufacturers of aerated blocks, and some manufacturers are even owed tens of millions; 3 Since the bursting of the real estate bubble in Ordos, Inner Mongolia, I believe that many people can see something, they are all layers of money, and in the end, they are pressed on top of the house, and even due to the rupture of the capital chain, there will be a lot of unfinished buildings, is the latest phenomenon in Ordos an isolated case? Will the crash spread to other cities? This is all unknown; 4 Now that the developers are in a hurry to get the house out of the groom, how many will take it?

Speculative or those who have the conditions to buy have already been bought, and what if there are many people who want to buy and have no money to buy? It's up to you to think about it.

In recent years, the state has been very strict in controlling land, especially in the approval of industrial land. The last aerated block plant first faced the problem of land approval, then the problem of environmental impact assessment, and then the problem of funding, all of which were indispensable; The issue of land approval and environmental impact assessment first needs to have a project approval report, and due to the difference between various regions, the smallest approval project has been controlled at an annual output of more than 150,000 cubic meters. May I ask?

The annual output of 150,000 cubic meters of gas plant at least investment in more than 20 million to normal production, of course, not in accordance with the formal design scheme of about 12 million can also be barely produced, the most critical and most important enterprise is on the aerated block project in the future product sales problem, as mentioned earlier, in addition, now there are not a few factories producing aerated blocks in that city in China, so not on the project want to go on, on the tiger is now more difficult to ride, According to the actual situation of the buyer, the buyer's market is not optimistic this year; On the other hand, in the seller's market, the domestic large and small production of aerated block equipment, refueling equipment manufacturers as many as thousands, can produce good products and a few, the buyer is not not to inspect the market, to inspect and inspect the equipment and a few, so 2012 is the manufacturer of aerated block equipment and the nightmare of the gas plant to be launched.

This seems to be the market prospect of aerated blocks, you go to Henan Tai'an Machinery to see, and the introduction of this aspect is above!

Because aerated concrete block (also known as aerated block) has the advantages of light bulk density, high thermal insulation performance, good sound absorption effect, high strength and processability, and the aerated block production raw materials are abundant, especially the use of fly ash as the raw material of aerated concrete block, that is, it can comprehensively utilize industrial waste residue, control environmental pollution, do not destroy cultivated land, and can create good social and economic benefits, it is an ideal wall material to replace traditional solid clay bricks with aerated blocks. Aerated concrete blocks (also known as aerated blocks) have been strongly supported by national wall reform policies, tax policies and environmental protection policies for many years, and aerated concrete blocks have become an important part of new building materials and have broad market development prospects.

Aerated concrete products have been developed in foreign countries for nearly 100 years, and have become the pillar industry of the construction industry. Because aerated concrete has the advantages of light bulk density, high thermal insulation performance, good sound absorption effect, certain strength and processability, and rich production raw materials, especially the use of fly ash as raw materials, it can comprehensively utilize industrial waste residue, control environmental pollution, do not destroy cultivated land, and can create good social and economic benefits, it is a wall material that replaces the traditional solid clay brick physiognomy, and has been strongly supported by the national wall reform policy, tax policy and environmental protection policy for many years. Aerated concrete products have become an important part of new building materials and have broad market development prospects.

It is a very large, very hot project in recent years, we have production equipment here, you can take a look.

I won't say more about the market prospects that have already been said upstairs. If you want to invest, we Zhengzhou Deyi Heavy Industry reminds you: investors choose aerated concrete equipment manufacturers, generally through two ways:

Friend referrals and web searches. If it is an aerated concrete equipment manufacturer introduced by a friend, it will be more secure than looking for it yourself, because after all, we will be more assured that someone has used the product, and we must pay attention to distinguishing the true from the fake if we look for aerated concrete equipment manufacturers through the Internet. The development of aerated concrete equipment and mechanical equipment has given birth to a large number of leather bag companies and small manufacturers, these small companies do not have enough technical force, no after-sales service guarantee, the use of virtual networks to confuse the eyes of investors, and make money by making money.

Aerated concrete equipment can be produced according to the category of raw materials, quality, process characteristics of the main equipment, etc. However, under normal circumstances, fly ash or silica sand is ground into a slurry with water, powdered lime is added, an appropriate amount of cement, gypsum and foaming agent are injected into the mold frame after stirring, and after the static oxygen foaming is solidified, it is cut into blocks or plates of various specifications, and sent into the autoclave by the steaming and curing car, and a porous and lightweight aerated concrete product is formed under the high temperature saturated steam curing.

The selection and quantity of aerated concrete equipment are determined according to the process design scheme, according to the process design, pouring is divided into two kinds of pouring: fixed and mobile, the cutting method is mainly flipped cutting in China, and other batching systems, autoclaved curing and other equipment are similar.

Aerated concrete equipment, as the name suggests, is the equipment for the production of aerated concrete blocks, which is mainly divided into aerated concrete block production sections

Raw material processing equipment: jaw crusher, ball mill, slurry pool, slurry storage tank;

Batching pouring section: pouring mixer, mold, side plate, metering scale;

Flip cutting section: flip spreader, steaming trolley, cutting machine, flipping machine, semi-finished spreader;

Autoclave curing section: autoclave, finished product fixture, breaking machine.

The aerated block is a new type of wall material, and aerated concrete is a new type of building material that is light and porous, which has the advantages of light weight, good thermal insulation, processability and non-combustion, and can be made into blocks, plates and insulation products of different specifications, which are widely used in load-bearing or enclosure filling structures of industrial and civil buildings. Hope my answer will be helpful to you, you can refer to the detailed information about AAC equipment.

Aerated concrete equipment is used to produce aerated concrete blocks, and the development of aerated concrete products in China is very rapid and the prospects are very broad. Aerated concrete has become a pillar industry in China's construction industry, and China has introduced this technology for nearly 40 years. The aerated concrete equipment is mainly two production processes, fly ash aerated concrete block and sand aerated concrete production line equipment and other aspects of technology to reach the industry-leading level.

Aerated concrete block is a new type of green and environmentally friendly self-insulating wall material made of river sand, lime and cement as the main raw materials, aluminum paste as the gassing agent, and the raw materials are finely grounded, mixed with ingredients, poured and gased, cut by static stop and autoclaved curing. It has the characteristics of light weight, high strength, durability, thermal insulation, sound insulation, fire prevention, impermeability, and good anchoring performance, and has the advantages of convenient construction, strong machinability, can reduce the comprehensive cost of the building, and increase the usable area of the building. It is also a new type of project promoted by the state.

Aerated concrete equipment is used to produce aerated concrete blocks, and the current construction industry basically uses aerated concrete blocks as materials. The development of the construction industry has made the use of aerated concrete blocks more and more large, and similarly, aerated concrete equipment has also received more and more attention. Zhengzhou Baixin Machinery adopts German Weihan technology.

I recommend you check it out.

production situation, reasonable operation and use of equipment.

1. The production of fly ash refueling equipment meets the technical requirements of the product and reaches the production scale. According to the production process, the configuration is also different.

If the production needs are different, mobile pouring is suitable for aerated concrete production lines with an annual production capacity of 30,000 cubic meters, and mobile pouring can save time and quickly complete the pouring section. The flip cutting process is suitable for the production line with an annual output of less than 150,000 cubic meters, and the flip cutting process is suitable for the production line with an annual output of more than 100,000 cubic meters. The flexible production process is suitable for investors with different needs in different regions.

2. The raw materials are treated and proportioned, particle size, etc., to achieve standardized production, and each link is carried out in accordance with the regulations. Secondly, the production efficiency of the cutting machine directly affects the production volume of the aerated concrete block, and the aerated concrete block that has been cut enters the steaming and curing kettle for steaming and curing, therefore, the accommodating space of the steaming and curing kettle also directly affects the production efficiency of the whole production. For the different production scales of cutting machines and autoclaves, manufacturers will give different equipment configurations in order to achieve maximum production efficiency.

Fly ash refueling equipment can be divided into an annual output of 2-300,000 cubic meters according to different outputs, users can choose reasonably according to the needs of production, and Deyi Heavy Industry provides reference.

Aerated concrete block equipment can also be called aerated concrete block production line, the whole production line is composed of many machines and equipment, so the cost of its production is relatively high. The performance parameters and output of the equipment is an important part of the decision, the higher the output, the higher the output, of course, because the machinery and equipment in the production line can be replaced, if you want the general equipment, then the first can be lowered, if you want the degree of automation and high performance equipment, then the first must be higher. In addition, the quality of equipment raw materials will also make the equipment higher, which is also one of the reasons for the high cost of equipment investment.

For the aerated concrete block equipment produced by Zhengzhou Deyi Heavy Industry, on the other hand, the reason for the high investment cost is the land area and labor cost of the plant. Because aerated concrete block equipment covers a large area, so the investment cost will be relatively higher than other brick-making equipment, and labor cost is another unavoidable point, now the salary of professional equipment maintenance masters, as well as the wages of workers in the factory are in the first place, which will also increase the investment cost of aerated concrete block equipment.

Send the whole Jiaoshan Taoist priest (Wei Yingwu).

Because the profit is also relatively high.

Aerated concrete equipment in recent years, China's aerated concrete industry has achieved rapid development, with the in-depth implementation of the wall reform policy, especially the gradual elimination of solid clay bricks, light lime sand and fly ash aerated concrete blocks will win a broader space for development.

Aerated block equipment is also showing a new trend in China, and the general trend is upward. The process of aerated concrete equipment has become more automated, more than half of the current automated aerated concrete block equipment technology, automatic control, mechanical and mechatronics, a large number of use greatly improves the production efficiency, improves the life of the equipment and the use of aerated concrete production equipment, and fully realizes business flexibility and ease of use of production technology. The addition of mechanical energy to complete a variety of complex processes controlled by computers to ensure high quality production.

AAC complete equipment production line is a fully adaptive system, the whole production line can see one machine, each machine is this kind of production line for concrete components, and the coordination of all components working between each ensures high output, high quality and high production efficiency of AAC blocks.

Aerated concrete equipment to make aerated concrete, is a new type of building materials, mainly blocks and plates, can use different formulas, processes to make load-bearing wall blocks, non-load-bearing wall blocks and insulation blocks, plates are divided into roof insulation board, insulation floor and insulation wall board.

As an important part of wall material innovation and building energy saving, aerated concrete is an ideal wall material to replace clay bricks that has been proven in practice after years of application, and it has strong competitiveness in various wall materials. In the "Eleventh Five-Year Plan", the state clearly proposed: "Development plus.

Aerated concrete slabs and aerated concrete block production line with an annual output of 10-200,000 cubic meters, autoclaved curing, mechanical cutting. "Due to the needs of wall reform and the advantages of aerated concrete products, aerated concrete will be a new type of lightweight building material that has been vigorously developed in the past ten years.

Aerated concrete has the advantages of light weight, good thermal insulation performance, good sound absorption effect, and has certain strength and processability, as the filling and insulation material of the envelope structure, it is widely used in construction, and is widely valued by countries around the world, and has become the preferred building material for the promotion and development of many countries. China has become a big country in the production of aerated concrete, but also become an independent category of emerging industries, the production of raw materials is extensive, especially the use of fly ash as raw materials, that is, the comprehensive utilization of industrial waste residue, environmental pollution, do not destroy arable land, the production of aerated concrete blocks, is an ideal wall material to replace solid clay bricks, can meet the requirements of the Ministry of Construction of the building energy saving up to 60% of the building standards, can promote the renovation of wall materials, While making the industrial waste slag fly ash that brings serious harm to be comprehensively treated and utilized, it can enjoy a number of preferential policies such as wall reform and taxation, so as to obtain better environmental, social and economic benefits, and has broad market development prospects.