What else does the video intercom doorbell do

You can also remotely open the door control, for example, now every building in the community has access control, generally need a password or access control card to open, if someone wants to go to your house, press your house number on the downstairs access control, your doorbell will ring, you pick up the microphone, you can see the visitor's face through the camera, if you know, you can press the door button on the doorbell, open the door, others can come in, you don't need to go downstairs to help him open the door.

In addition, you can use this to talk directly to the property in the community, if you have problems with water, electricity, gas, etc., or when you need other help, you can talk to the property directly.

The characteristics of the residential community are concentrated users, large capacity, unified security management, and the economic income of most areas in the country is not high, so the community security system must be satisfied"Safe, reliable, cost-effective, and centrally managed"Although there are a variety of security systems on the market, there are not many products that really meet the characteristics of the community and are suitable for the use of the community. As such a product, the building has the characteristics of few connections, household isolation is not afraid of short circuit, no power supply in the house, no power consumption in the standby state, no special ** line, high stability, reliable performance, and convenient maintenance.

Yuanfan common cable two-wire building intercom system] The main trunk line is the radio frequency line (cable TV line transmission), the building household extension line is a two-core power line, and the intercom extension is not divided into positive and negative pole connections, and the installation is free of debugging. It greatly saves labor, wire rod and RMB. The abbreviation is:

Save labor, save lines, and save money.

Call unlocking, intercom monitoring, alarm.

1. Select MusicVolume and press the "Hang" button to confirm.

2. Adjust the volume by "+", press the "Hang-up" machine to confirm, save and exit.

How to use the owner's side:

1. I heard Ling Xiang pick up the phone. Press the "top button" on the side of the phone to confirm whether the person below you knows you.

If you are the owner, then you don't need to debug it yourself, if you are a property or engineering company, then the manufacturer will teach you, or debug it for you.

Yuanfan building video intercom access control system].

The coaxial common cable one-line video intercom is the main line using SYWV75-5 RF line, and the entrance line using a RVV2* or above two-core wire.

1.Simple construction and maintenance;

2.Better image and sound, stable control, and stronger system stability;

3.Long transmission distance;

4.Networking is more convenient;

5.Save money over traditional ones;

6 Households are completely isolated.

The main line is a radio frequency line (cable TV line transmission), the extension line of the building residents is a two-core power line, and the intercom extension is not divided into positive and negative pole connections, and the installation is [no debugging]. It greatly saves labor, wire rod and RMB.

Video intercom, non-video intercom, coaxial common cable, two-wire old engineering transformation, etc.

If the number of households is small, you can debug it as a whole, confirm that the line is connected, power on, try one by one, find out the problem households, and find the reason: if the number of households is large, it needs to be debugged in layers, first connect one or several layers, debug, and then connect a few more layers until it is connected.

Tutorial: Wiring method of unit door unit in video intercom system.

Generally, it is directly plugged in for easy installation.

Different product models, different configurations, and different wiring methods.

1. Call your own extension on the host, after the extension rings and goes off-hook, press and hold the "unlock" button for 5 seconds before you let go and hang up. The host displays the word " to enter the password setting procedure.

2. After the host enters the password setting program, enter the 4-digit password by the keyboard, and the host stores the memory synchronously, and press Confirm after the password is set. (The password entry must be completed within 20 seconds, otherwise the host will exit the program and re-operate).

3. If you have already set a password before, you can also change the password through this method. The operation method of password unlocking: press " on the host at the door of the unit to unlock, * is a four-digit password.

If the password is entered incorrectly, the host will prompt the word "err5" and clear it immediately, and operate it again.

4. Two people are required to complete this setting; One person presses the extension number at the door machine of the unit, and one person goes off the phone to talk after ringing; After the indoor extension is off-hook, press and hold the unlock button "4 seconds" until the host shows "L-" and disconnect the call line; Enter the four-digit user password on the unit door machine, "HHHH" will be displayed, "P-" will be displayed and there will be a crisp prompt tone, indicating that the setting is completed, otherwise "err-7" will be displayed.

5. After the setting is completed, press the "*" key to exit.

Generally speaking, the video intercom doorbell refers to your doorbell system, we often say that building intercom, video doorbell, video intercom, intercom doorbell and other words, are the same meaning, both refer to a set of visitor intercom management system! Strictly speaking, building intercom is a visitor management system, which is a set of humanized management visitor operation system including software, hardware and after-sales service.

1. Select MusicVolume and press the "Hang" button to confirm.

2. Adjust the volume by "+", press the "Hang-up" machine to confirm, save and exit.

How to use the owner's side:

1. I heard Ling Xiang pick up the phone. Press the "top button" on the side of the phone to confirm whether the person below you knows you.

1. Hands-free key: used to pick up the phone when the fence machine, unit door machine or management machine is called.

2. Unlock key: It is used to control the host to unlock during the call with the fence machine or the unit door machine, and press the "unlock" button to turn off the siren when the extension alarms.

3. Management office key: used to call the management office, press the "management office" button in the standby state to monitor the image of the door machine in the lobby, and press it again to exit the monitoring.

4. Image adjustment potentiometer (contrast adjustment button, brightness adjustment button): used to adjust the contrast and brightness of the extension display image.

5. Setting button (Setting, 0, 1, 2, 3): used for the function setting of the extension.

6. Volume adjustment potentiometer: used to adjust the volume of the extension call sound, to the left is small, to the right is large.

7. Indication of each function lamp:

The function of the hands-free light (green light): when the hands-free light (green light) is always on, it means that it is in the state of lifting; When the hands-free light (green light) flashes, it indicates that there is a device call.

The function of the unlocking light (yellow light): the function of the busy prompt light (red light): the extension presses the "unlock" button during the call with the VTO, and the yellow light flashes once, indicating that the connected electric lock is opened.

Your access control is an extension of the villa-type access control system, which can control the gate and the gate of the villa... Look at the specific wiring method, if you connect these two signs normally, it is to control the door switch and lock, and the key is to open the door.

Opening and closing of the stairway door.

How to set the visual control video intercom doorbell Hello, dear, how to use the client: 1. Press the "on" in the lower left corner of the panel to turn on the power of the access control 2. Press "0*** for the room number, such as 0101 is room 101) 3. Press the " " button to start ringing. How to use the owner's side:

1. I heard Ling Xiang pick up the phone. 2. Press the "top key" on the side of the phone to confirm whether the people at the bottom know it, then press the "key in the middle of the beam" to talk, and finally press the "bottom button" to open the door (there are three buttons on the side of the phone, the top is **, the middle is intercom, and the bottom is to open the door). I hope it can help you, if my answer is helpful to you, socks only please give a thumbs up (in the lower left corner of the evaluation), oak rot looks forward to your like, your efforts are very important to me, your support is also the driving force for my progress.

Finally, I wish you good health and a good mood!

1. First of all, you need to set up the mobile phone wifi and connect to the wifi at home.

2. Press and hold the button behind the video intercom doorbell, press and hold for 6 seconds, and release it after hearing a tick.

<>4. After that, click on the wireless wifi settings to set the wireless wifi of the video doorbell

5. After that, tap the video doorbell.

6. After setting the wifi password, click the start configuration button.

7. Wait for the pairing wifi timing to complete.

8. After the pairing is completed, when you press the doorbell, you can see the person who rings the doorbell through the mobile phone.