I would like to ask, how many degrees can the maximum temperature of the smart blast drying oven DHG

Generally 200 degrees Celsius.

The rate of heating up depends on how much you put in it, it is slower when there is more stuff, and faster when there are fewer things.

The maximum temperature of this model of drying oven can reach 300 degrees, and the general heating speed can reach 5 min.

Summary. Troubleshooting method of the phenomenon when the electric heating constant temperature blast drying oven is faulty, and the phenomenon troubleshooting method when the fault is 1The box is connected to the power supply, the green indicator light is on, after a period of time, there is no heating phenomenon, at this time, it is necessary to check whether the heating wire joint at the bottom of the box is loose or burned, and replace the heating wire if necessary.

2.If the green indicator light is not lit after the power is turned on, there is no contact connection sound, because the voltage used is checked to be consistent with the model of the machine or because it falls off through the connection of the transportation wire. 3.

There are generally three reasons why the heating indicator does not light up: the bulb is broken; Poor contact of bulbs; The heating system is out of order. 4.

Turn on the heating switch and do not heat. There are generally four reasons: nickel-chromium wire breakage; Switch and line desoldering; The temperature control knob refers to the zero position (turn the temperature control knob to the temperature scale); The relay is damaged.

Troubleshooting method of the phenomenon when the electric heating constant temperature blast drying oven is faulty, and the phenomenon troubleshooting method when the fault is 1The box is connected to the power supply, the green indicator light is on, after a period of time, there is no heating phenomenon, at this time, it is necessary to check whether the heating wire joint at the bottom of the box is loose or burned, and replace the heating wire if necessary. 2.

If the green indicator light is not lit after the power is turned on, there is no contact connection sound, because the voltage used is checked to be consistent with the model of the machine or because it falls off through the connection of the transportation wire. 3.There are generally three reasons why the heating indicator light does not light up

The light bulb is broken; Poor contact of bulbs; The heating system is out of order. 4.Turn on the heating switch and do not heat.

There are generally four reasons: nickel-chromium wire breakage; Switch and line desoldering; The temperature control knob refers to the zero position (rotate the temperature control and noise reduction knob to the temperature scale); The relay is damaged.

If the type is connected to the blower motor, if the switch is to the end of the blower, first check the motor screws, whether the connection spring falls off, if everything is normal, the end of the blast, you can turn the motor by hand after the power supply is cut off to see if the blade is removed, otherwise everything is normal, then ask the electrician to check the line. Precautions: The outer mold shell of the drying oven must be good and effective, but pure imitation grounding, in order to ensure safety, perishable, flammable, explosive materials shall not be placed in the drying oven When the temperature of the drying oven studio is close to the set temperature, the heating indicator light is on and off, repeating many times, which is a normal phenomenon. Under normal circumstances, the temperature in the work room enters a constant temperature state when the new set temperature is lower than 100 or less, with a secondary heating method, the temperature can be eliminated from the hypothetical 50, the second set of 40, and then set to 50 after the temperature overshoot begins to fall back When the drying oven is working, the fan switch must be turned on to make it operate, otherwise the temperature in the box and the measurement temperature error is very large, and the motor or sensor will be burned out due to this operation, and the box should be kept clean frequently. If not used for a long time, the plastic dust cover should be covered and placed in a dry environment.