Aluminum alloy surface lubricant 5, aluminum alloy surface lubricant

If you are just stocking, you can use 03262 SP-350 long-lasting rust protection agent (oil-based) and 03282 SP-400 long-lasting rust protection agent (dry) produced by CRC Industries

SP-350 long-lasting anti-rust protective agent (oil-based).

1. Product introduction:

It is a long-term oily anti-rust film, which can provide up to 2 years of anti-rust protection for metal parts and mechanical bodies and has super lubricity. Finished metal products, semi-finished products for storage and flight parts, goods in ocean transportation, precision mechanical surfaces and inventory equipment, etc., all have excellent anti-rust protection period.

2. Features:

Excellent moisture removal function and automatic repair of permeable membrane characteristics.

Effective protection of copper and brass.

Protect inventory, machinery, parts, instruments, etc. in ocean transportation.

Extremely strong lubricity, pressure resistance 1250 pounds.

The protective film helps the machine to start without removing the oil film.

Dielectric strength 32500 volts.

Hold NSF, SP-400 long-lasting anti-rust protective agent (dry) 1, Product introduction:

The long-lasting soft anti-rust film can provide long-term anti-rust protection for machinery or parts stored indoors, outdoors or during long-distance shipping. Protect long-distance shipping, erosion by seawater and salt, waterproof, salt-spray, mildew-proof, insulation protection. Protects all metal surfaces and metal parts from corrosion.

2. Features:

Amber soft wax film, long anti-rust period.

The soft film will never be brittle, cracked, and highly resistant to salt and moisture.

Ordinary solvents can be used, and the wax film is very easy to remove.

It can be diluted with ordinary solvents.

H2 registered and certified for use in the food industry.

JONYE high temperature lubricant can be used, this product also has anti-oxidation effect to protect aluminum alloy against corrosion and oxidation.

Good evening, you can coat a small amount of silicone oil or paraffin hydrocarbons on the surface of the aluminum alloy to reduce the coefficient of friction for lubrication, if you want to use it for a long time, you can also spray water-based polyethylene wax emulsion or water-based PTFE emulsion to form a film, the cost is low, and the effect is also very good with various lubricating greases such as lithium grease and molybdenum grease, and it can also effectively prevent the surface of the aluminum alloy from being slowly oxidized to isolate the air after coating.

It is best to use a special cutting fluid for aluminum alloy machining, because aluminum is a material that is easy to corrode, not a special cutting fluid, which may lead to spots, yellow spots, sticky knives and a poor surface brightness.

Aluminum alloy cutting fluid is generally divided into emulsified oil, semi-synthetic cutting fluid, fully synthetic cutting fluid, emulsified oil content of 50-90%, semi-synthetic 5-30%, fully synthetic without oil, generally speaking, the higher the oil content, the better the lubricity, but the more prone to corruption, the service life is not long.

Therefore, aluminum alloy processing manufacturers need to choose the right cutting fluid according to objective requirements when choosing cutting fluid.

The aluminum-based grease is made from aluminum stearate hand soap thickened with mineral oil, and Zhaowu has a high degree of Bichaicha water resistance.