-
It has a lot to do with the signal. It is recommended to use Unicom. The signal is relatively strong.
-
There are two main factors that can cause your internet speed to be slow:1You are far away from the base station or you are in a place where the signal level is low, 2The number of users using the service in the same cell of the base station is too large.
-
Router reboots, most routers have limited memory or ability to process information, reboots can periodically clean up the router's cache.
2.Set according to the angle of the router antenna on the manual, the wrong angle of the antenna of the wireless router will cause the wifi signal to be poor.
3.Place your wireless router in an open space so that the wifi signal doesn't pass through many walls and doors as much as possible.
4.You can choose to change to a new dual-antenna or multi-antenna router, as the use of a wireless router for a long time will cause poor WiFi signal.
-
Telecom's wireless network card uses 3G, 2G network, if the 3G network is abnormal, then it will switch to the 2G network to surf the Internet, and the speed of the 2G network is relatively slow.
Reason: 1. The local 3G coverage network speed is very slow.
2. Computer poisoning.
3. There are too many people around who use 3G, resulting in too slow network speed.
Solution: Avoid network rush hours and surf the Internet.
-
2.In the running state, here we will see our current DNS. Search the local DNS address of the broadband operator you are using on the Internet to see if it is the same, if it is different, you need to change one.
4.Just tick the box to set up the DNS server and enter the DNS address of the local broadband operator you are using.
-
The main reason for the slow telecom broadband wifi may be the setting reason, because the main broadband is used by the computer, it occupies the most broadband resources, and the rest is that the 100 megabit port of the optical modem will naturally slow down, a way to increase the bandwidth rate, and a gigabit port to find a way to connect the optical modem.
-
Hello. Telecom's whole-house WiFi can ensure that the signal is stable in every corner of the home. "Whole Home WiFi" is a professional service product launched by Shanghai Telecom for all home users based on the advantages of its existing broadband business and the professional capabilities of its installation and maintenance team, providing home WiFi solutions for telecom home broadband users.
-
Telecom broadband itself is very slow, if you want a fast network, it is recommended that you change to Unicom. Broadband or mobile broadband is available, and the internet speed is very fast.
-
The wifi signal is full, the network speed is slow, so as to improve the network speed, what is the router and 5G?
It is possible for both the line and the cat, and if you are not sure, you can buy a cat to try first. >>>More
According to your description: first of all, you need to judge the situation when the broadband connection is dropped, and according to different appearances, you can really find the real cause of the disconnection. The following is a targeted solution according to various disconnection phenomena: >>>More
The telecom broadband suffix is different in different regions. 1. The format of telecom broadband is generally an area code reinforced phone number. In real life, it is generally fixed in your home**. >>>More
Hello, China Telecom's wifi in the broadband cat is not available, just a wireless signal, you need to use a wireless network to buy a wireless router, you can buy a router to set up, and then use wireless wifi. >>>More
Dear Telecom users, Hello!
According to your description, a wired broadband network cable is plugged into the wireless router WAN port, and then a network cable is used to connect directly to your laptop (or desktop) from the LAN port. Then open the browser, enter generally, or, (see your manual) enter the management and password, generally admin, enter the setup wizard, fill in step by step, according to your broadband** to make a choice, if it is adsl, you need to fill in the username and password, if it is a fixed IP address or not a fixed IP address of broadband, you have to fill in the necessary information, fill in all the way, very simple. For the security of data and wireless network, you go to the special wireless column to start the key, generally choose the wep method, fill in the key you want to set, pay attention to the number of key bits, see your page prompt, and then select the route in the route to restart, not manual power off, and then it's OK, search for the routing signal, enter your preset password everything OK! >>>More