I am telecom broadband dial up Internet access, how to set up a wireless router installed

Dear Telecom users, Hello!

According to your description, a wired broadband network cable is plugged into the wireless router WAN port, and then a network cable is used to connect directly to your laptop (or desktop) from the LAN port. Then open the browser, enter generally, or, (see your manual) enter the management and password, generally admin, enter the setup wizard, fill in step by step, according to your broadband** to make a choice, if it is adsl, you need to fill in the username and password, if it is a fixed IP address or not a fixed IP address of broadband, you have to fill in the necessary information, fill in all the way, very simple. For the security of data and wireless network, you go to the special wireless column to start the key, generally choose the wep method, fill in the key you want to set, pay attention to the number of key bits, see your page prompt, and then select the route in the route to restart, not manual power off, and then it's OK, search for the routing signal, enter your preset password everything OK!

Hope it helps.

If you have any other questions, you can also log on to the online business hall of Telecom (

Inquire about it.

Dial-up should be made with the router's PPOE.

In many places, telecommunications will bind your network card to access the Internet, so you can only dial in from your laptop. The solution is to have a "MAC address cloning option" in the router, log in to the router with your laptop wireless network card, and clone the router MAC address into a notebook wireless network card.

1.Find a network cable to connect the cat to the router, and connect the router to the WAN port.

2.Find a network cable to connect the router to the computer.

3.Set up your router.

4.After setting up, you can go directly to the Internet, no need to dial.

1. The network port (LAN port) of the telecom optical modem needs to be connected to the WAN interface of the router with a network cable (called the Internet interface in some routers). For the computer, connect the network cable to any of the LAN (1, 2, 3, 4) ports of the wireless router.

2. Set the IP address of the computer.

3. Set up a wireless router to access the Internet.

4. At this time, the router will automatically check the "Internet access mode", if it is detected: broadband dial-up Internet access - > you need to fill in "broadband", "broadband password" - click "Next".

5. Wireless settings.

Set the "wireless name" and "wireless password" on this wireless router

Extended content: Optical fiber communication is widely used as the best for information transmission due to its unique anti-interference, light weight, large capacity and other advantages. The use of existing transmission lines to lay fiber optic cables is the most economical and efficient.

Due to the advantages of large capacity, long distance and anti-electromagnetic interference, optical fiber communication is well adapted to the needs of today's power communication development. In particular, optical fiber composite overhead ground wire (OPGW), which combines the high mechanical, high conductivity and good corrosion resistance of aluminum-clad steel wire, effectively combines power overhead ground wire with communication optical fiber, so it has attracted the attention of the power system industry and has gradually been popularized and used.

The installation and setup of the router is as follows:

1.First, connect the line between the broadband modem and the computer of the router, and use a network cable to connect the LAN port of the broadband modem to the WAN port of the router.

2.After the line is connected, open a browser, enter the management address and management password of the router, and then enter the router background (the login address and login password of the specific router can refer to the manual or the label on the back of the router).

3.After logging in to the background, select Quick Settings, enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

4.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

<>2. Then open the browser of the computer, enter the login address and login password of the router, and the specific login IP and password can be looked at the label on the back of the router.

3. After entering the router, there will be a setup wizard, first fill in your broadband account and password.

4. Then set the wireless name and connection password.

5. After the successful setting, a prompt will appear for the successful setting, and it will take effect by restarting the router.

Hello, route settingsYou can set it up by following the steps below!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect the LAN port of your router at the other end

interface! 3. Open the computer, open the browser, enter the route login IP in the address bar, 4, enter the route login account and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login account and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoE, enter your Internet account and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!

You plugged in the router interface incorrectly, you should connect the WAN port of the router to the modem, and then enter the router configuration interface to enter the broadband account to the WAN interface. In this way, all devices go directly to the Internet through the router and do not need to dial up.