-
Hello, the flywheel bearing of the scooter is bent, it can not be used, the flywheel bearing needs to be replaced, you can continue to use, thank you.
-
Glad for your problem, if this happens, it is recommended that you find a maintenance person to help you repair it or replace it with a new one.
-
This question is very good, as far as I know, of course it has to be replaced, according to my personal experience, this cannot be repaired, and it can only be replaced by replacement.
-
If you find that the flywheel is bent, you can remove it, straighten it again and put it back on.
-
The flywheel axle of the scooter is bent, and this situation can only be replaced with a new one. Because adjusting this axis is very complicated.
-
The scooter is rusty, and when it is bent, it has to be replaced with a new one.
Or do a refurbishment and go to the motorcycle repair shop on the street, and it will help you repair it.
-
You'll need to remove it again, straighten the flywheel shaft, and put it back on.
-
Hello, if your scooter flywheel is rusty and bent, it is recommended that you go to a place dedicated to repairing the scooter.
-
The new one should be removed and a new one installed.
-
What to do if the scooter flywheel axle is bent, you can go to the place where the car is repaired to repair it, or just look for after-sales service to see if they have professional personnel there.
-
In general, it is recommended to go to a repair shop to repair it first.
-
Find an F-shaped tool, with a longer arm and a forked wrench.
-
Is it slippery, if it is slippery, you have to change the crank.
-
One fixes and then smashes the pedal with a stone or something. Second, go directly to repair.
-
This kind of Hongqing can go directly to repair the front car of the self-shielding mold, and one can be replaced, which can generally be replaced, and some are standard parts, which can be directly replaced.
If you feel that it is not coordinated, then you can directly replace both of them.
-
I don't know how crooked you are talking about It's usually a Samsung scoop My first car T8 is like this Because the quality of the Samsung coupling board is not good, it will be crooked almost as soon as it falls The method is to loosen the screws that fix the front shock absorber on the upper and lower chain plates, and then clamp the front wheel with your legs like a bicycle Correct the handlebar and then tighten the screws.
-
What should I do if I accidentally hit the handlebars of my motorcycle and ride it uncomfortably? The following master will teach you a trick to easily get it.
-
The handlebar is not easy to correct, and it is recommended to change the handlebar for a few tens of yuan.
-
Fix the bending deformation, and use a slightly larger hollow iron pipe to insert the brake pedal and pull it to the original position in the opposite direction of the bending.
-
I had to change the pedals. That's hard to correct.
-
Change the one that is available in the bike shop.
-
Wouldn't it be nice to take it to the car repairer?
-
Ghost fire is a type of scooter with a crooked head, which is generally related to the two iron-like things in the faucet. Generally speaking, changing the brakes of the front brake is sufficient. This kind of car falls, no matter how you kick it, how to correct it, it's useless, and there is still a little deviation, just because it has to be replaced, it's the same as the original.
-
No matter how you fix it, there are defects.
-
Stomp it with your foot in the opposite direction You can try it.
-
It is recommended to send some money to the repair shop to repair it, and repair it yourself. There will be hidden dangers.
Adjust the scooter carburetor mix ratio by adjusting the valve oil needle, the specific operation is as follows. >>>More
The method of adjusting the mixture: 1. First prop up the vehicle, and the air-fuel adjusting screw is rotated to the end in a clockwise direction, and then retreat 1 2 times. >>>More
If the scooter is brand new, it does not need to be adjusted. >>>More
If you don't understand anything, don't buy it unless it feels very cheap The easiest thing is to open it and feel it yourself Listen to the sound is not rubbish The sound is very smooth Not rough is better When idling Use a towel to block the exhaust pipe for a few seconds Listen to the sound of the engine If there is an abnormal sound It is the kind of metal knocking sound or something Normal mechanical sound is fine But the sound can't be too loud Block it for a few seconds Otherwise it will turn off The above feeling is no problem Just set up a big brace Give the big throttle when idling Give it slowly See if the exhaust of the car is still pure and transparent at high rpm If there is obvious blue smoke, it means that the car is burning engine oil Basically it is almost impossible Add a little more to the price of scrap iron If you have to buy it If it is black smoke, the problem is not very serious It is very likely that there is too much carbon in the car This is okay It may also be a problem with the carburetor This is not very serious If the carburetor is not damaged, it can be adjusted Generally there are these colors of smoke Hehe If it is green, it is hell haha. >>>More
This model is called Ghost Fire, and there are many manufacturers, from more than 2,000 to 20,000. If you say it's 125, it's a copycat miscellaneous motorcycle, and it's more than 3,000, and the quality is very poor, so it's not recommended to buy it. Six or seven thousand ghost fires, produced by Lin Hai or Feiying, are all 100cc, not 125cc, they are produced by regular manufacturers, the quality is OK, and they can be used. >>>More