How to restore the Rubik s Cube 40, how to restore the Rubik s Cube

Here is a brief introduction to the Rubik's Cube to restore the primary gameplay.

Each letter represents the six sides of the Rubik's cube: right, r, left, l, up, u, down, d, front, f, back, b, 90 degrees clockwise, with [ ], the letter represents 90 degrees counterclockwise, with ['] letters for 180 degrees clockwise with [ 2] letters for counterclockwise 180 degrees with ['2] The letter represents the introduction of the Rubik's Cube formula Step Introduction Introductory formula: Step 1: The bottom edge is returned to the position (also known as the bottom frame cross, the process of correct restoration of the bottom four edges) Step 2:

Bottom corner homing (reconstructing the four corner blocks of the first layer of the Rubik's Cube): Equation 2-1: (r u r'Equation 2-2:

f'u'f) Step 3: Middle Ridge Homecoming (the step of restoring the four edges in the middle layer of the Rubik's Cube): Equation 3-1:

u' f' u f ）（u r u' r'Equation 3-2 :(u r u' r'）（u' f'u f) Step 4: The top edge position (also known as the top shelf cross, the top surface color of the top four edges is the same as the color of the top center block):

Equation 4: f (r u r' u'）f'Step 5: Top Corner Face Position (the step in which the top surface color of the four top corners of the Rubik's Cube is adjusted to the top surface):

Equation 5-1:r' u2 r u r'u r formula 5-2: u' r u'u' r' u' r u' r'Step 6:

Corner homing (the other two sides of the four vertex corners of the face are the same color as the center block of the corresponding face): Equation 6: r b' r f2 r'b r f2 r2 step 7:

Vertice homing (the color of the other side of the four vertex edges that have been placed is the same color as the color of the center block of the other four faces): Equation 7: (r u' r）（u r u r）（u' r' u' r2）

Good luck!

This is best if you can spell it yourself!

If it doesn't work, tear it down! Tear down one of the 4 corners. It's easy!

I couldn't put it back when I was a kid, so I dismantled it. And then I was slowly settling down.

Reverting the imitation requires a Rubik's Cube, and the steps are as follows:1.Restore the bottom cross, flip the Rubik's cube, take the bottom layer as the top layer, find the desired edge, turn to the required position, and the rotation of the bottom layer in the process of spelling the cross has no effect.

2.Restore the bottom corner block, when restoring the corner block, first find the required corner block at the bottom, if you don't go to the top layer to find it.

3.Restore the middle edge and flip the entire cube face down.

4.Restore the top layer cross, restore the top layer edge, make the top layer corner block move to the correct position, and ensure that the color position is correct.

The top layer corner block is in place, restore the top layer corner block, the last step is very simple, but it is also easy to make mistakes, the next two layers will be messy in the process, don't worry, four steps and a cycle must be completed.

How would you rate this? Collapse.

Summary. 01 First find a random color and directly restore it to a complete surface, this step is not difficult.

How to restore the Rubik's Cube.

01 First find a random color and directly restore it to a complete surface, this step is not difficult.

02 Four-side bottom layer and center block restoration: Take the complete surface of the first step of restoration as the bottom, restore the trapezoidal shape formed by the bottom layer and the center block of the four sides, as shown in the following figure. While the second step is completed, the side that is completed in the first step remains intact.

03 The complete side completed in the first step is always the bottom surface: the face facing oneself is the "front". The lower two layers of the four sides are intact, which means that the lower two layers of the four sides are restored to completeness, as shown in the figure below.

04 Restore the top cross: After completing the third step, the next step is to restore the top cross, as shown in the figure below.

05 The square in the top layer of the four sides (cross homing): The square in the top layer of the four sides, that is, the square in the middle of the top layer of the four sides corresponds to the center block of the middle layer. This is shown in the figure below.

06 square alignment on both sides of the top layer of the four sides (return to the upper corner): The square on both sides of the top layer of the four sides is aligned, which refers to the alignment of the squares at the upper two corners of the four sides, and the homing does not mean that the color should be aligned, as long as the color of this piece corresponds to the color of the three sides where it is located, as shown in the figure below.

07 Top-layer completion: Top-level completion refers to the matching of the colors of each side of the four corners of the top layer in the state of returning the four corners of the sixth step, as shown in the figure below.

Hope it helps, hope, thank you!

Summary. The steps to restore the Rubik's Cube are as follows: Shuffle the Rubik's Cube so that the color of each side is different.

Restore one layer first, restore 4 small squares on the same side together, and make this layer the same color as the two adjacent layers. Then restore the second layer, restore the small blocks adjacent to the first layer to the correct position, and make the second layer the same color as the two adjacent layers. Finally, restore the third layer, restore the small square of the last layer to the correct position, and make the color of the whole Rubik's cube on each side the same.

The above are the basic steps to restore the Rubik's Cube, and the specific restoration method can be adjusted and improved according to personal experience and preferences.

The steps to restore the Rubik's Cube are as follows: Shuffle the Rubik's Cube so that the color of each side is different. Restore one layer first, restore 4 small squares on the same side together, and make this layer the same color as the two adjacent layers.

Then restore the second layer, restore the small blocks adjacent to the first layer to the correct position, and make the second layer the same color as the two adjacent layers. Finally, restore the third layer, restore the small square of the last layer to the correct position, and recite the excavation so that the color of each surface of the entire Rubik's Cube is the same. The above are the basic steps of restoring the Rubik's Cube, and the specific method of restoring the nucleus can be adjusted and improved according to personal experience and preferences.

First, observe the Rubik's Cube and understand the state of the entire Rubik's Cube. You see, what is the Rubik's Cube in the box, one hand rotates, changing the position of the odd angle block, you need the other hand to rotate in turn, the whole Rubik's Cube is restored to the original, each Rubik's Cube has a certain law, by observing the final position, you can restore the state of the Rubik's Cube as Peiqing Hanchu. Next, you'll need to restore all six sides of the cube to the correct position.

Put all the colors back in place, in the right direction, try not to turn the other sides, just pull this side, and slowly adjust until all the faces are lined up correctly. Finally, you have to put the pieces of the Rubik's Cube together one by one, and according to the state of the Rubik's Cube you are observing, you will have to put them together and cycle the units until they are stitched together into a complete shape. In general, the steps to restore the Rubik's Cube are:

1.Observe the Rubik's Cube to understand the state of the Rubik's Cube with an integer width. 2.

First of all, I smiled and restored all six sides of the Rubik's Cube to the correct position. 3.Finally, the pieces of the Rubik's Cube are spliced together one by one.

The easiest way to restore is as follows:

1. To crack the Rubik's Cube, we must first understand its structure, the Rubik's Cube has a total of 6 colors and 6 sides, and each side is divided into ** blocks (6 blocks in the middle), corner blocks (8 blocks in 4 corners) and side blocks (12 blocks in the middle of 4 sides). Among them, there is only 1 surface of the ** block, and they are a fixed structure, so ** is a red block, so the other red colors must be concentrated on this face.

2. Next, we will use letters to represent each side, first put the side with a white block in the middle (the one with a rubiks logo) on the top, and then make a white cross at the top, that is, the blocks of other colors are in the corresponding position.

3. Then the white corner blocks are put in place.

4. Then let the middle layer edge block be homed. Turn the white side downward, find the red and green side blocks, if the red and green edge blocks are on the top layer, then rotate the top layer in a clockwise direction until the side blocks are the same as the one in the diagram, and then turn the Rubik's Cube according to the formula to make the side blocks return to their positions.

5. Then adjust the top layer (should be yellow) side block upwards to make a yellow cross. If the yellow cross does not appear on the top layer after 1 rotation of the formula, you can repeat the rotation until the yellow cross appears.

6. At this time, the yellow block and the color of the side will be misplaced, according to the formula (I haven't read it thoroughly) to position the yellow block at the four corners, and finally adjust the color block on the side to the corresponding position.

Here's how to restore the Rubik's Cube:The Rubik's Cube is restored according to the formula:

The first step is to make a white cross; Wisdom eggplant.

The second step, the first layer of formulas: right order, up order, right inverse, up order, right order, up order, up order, right inverse;

The third step and the second formula: right order, upper order, right order, right order, right order, right reversal, right reversal, right reversal, right reversal;

The fourth step, the second layer of the formula is reversed: right inverse, upward inverse, right inverse, upward inverse, right inverse, upward straight, right straight, right straight;

The fifth step and the third level formula: right order, up order, right inverse, up order, right order, right order, up order, right order.

How to restore the Rubik's Cube is as follows:Tools Ingredients: Rubik's Cube.

1. Restore the bottom cross, flip the Rubik's cube, use the bottom layer as the top layer, find the desired edge, and turn it to the desired position.

2. Restore the bottom corner block, and find the required corner block at the bottom when restoring the corner block.

3. Restore the middle layer of the edges, flip the entire Rubik's cube over, and the finished side is facing down.

4. Restore the top layer of the cross leakage disorder, restore the top layer of the edges, so that the top layer of the corner block to move the hail to the correct position, to ensure that the color position is correct.

5. The top layer corner block is in place, and the top layer corner block is restored, and the next two layers will be chaotic, and the four steps and a cycle must be completed.