One of the girls said, Shall you give me a hinge? What do you mean?

Yes, she loves you too, too

To install the hinges of the cabinet door, the screws need to be full, and the specific operation steps for installing the hinges of the cabinet door are as follows:

1. Put the hinge into the hole of the cabinet door.

2. Tighten the 2 screws that fix the hinge.

3. Tighten the 2 screws that fix the hinges under the cabinet door.

4. Fix the hinges on the cabinet.

5. The installation is complete.

It depends on what kind of board you're using! Some plates are very good with holes! But there are generally no holes! It's hard to collect money! Screws don't cost much.

1: Think about the installation process first. (Not at all, you can refer to the existing similar cabinet door installation for more observation) 2:

Measure the size and buy the corresponding hinges and screws (there are many styles of hinges). 3: Prepare power tools, slightly flat-bottomed drill bits, convenient for punching holes (diameter size according to the shape of the hinge), slotted and crossdriver.

4: Specify the position of the hinge, the parallel and vertical positions between the hinges must be right, draw lines and points on the outside of the hinge and the position of the screw hole, (otherwise it will be troublesome to adjust after installation, and the aesthetics will be a little worse) 5: Install the hinge on the door first 6:

Then install the hinge on the door frame, 7: adjust the gap to achieve beautiful appearance.

It's better to keep one, the main prevention is the sagging of the door panel caused by wear, not the loosening of the screws, and the cutting corners must not have been done after-sales.

If it's a cup-shaped hinge, it's definitely going to be full.,The last one is just in the factory trial to see if there's a problem with the stuffy position.、Door cracks.,It's definitely going to be full at home.。

Said to cut corners are trolls, now the plate material is more, the time is easy to loosen, and then there are hinges after a few years will also be broken, according to the plate to screw a few times will not be tightened, full of wire once the hinge has a problem, the problem is serious, if the owner has to be full, then to achieve his satisfaction with a silk three seconds of things, for reference only, because I am perennial installation of the whole house furniture customized.

Jiapang, Hettich, Lumburg, Blum and so on are the four major brands of home hardware.

It must be a Jiapang hinge, a big brand, the first choice, I have been shooting for 15 years, and the quality is still very good, but the style is really old, and the quality is good.

If the force is not along the rod inward or outward, such as a 45-degree angle, then analyze the force on the rod, decompose and modify the force, one along the rod inward, one downward, then the rod will definitely not stop, will move downward, until it reaches a position, so that it is balanced, then the balance position can only be elastic outward or inward, otherwise it will continue to move until equilibrium.

hinge [dictionary] hinge; gemel; butt hinge; coupling head;

Example sentence] Hinge the mirror to the outer frame.

the mirror was hinged to a surrounding frame

It is the hinge, and the diameter of the round hole of the hinge cup is 40 centimeters. The normal is 35. 40 is a little bigger, and there are 30 and 25 ones.

It is a magnetic flux and several closed loop hinges, find the magnetic flux, count the closed loops that are linked to it, and multiply the two Huai skillful. For example, if the area of the closed loop of an n smashing coil is s, and it is placed in a uniform magnetic field with a magnetic field strength of b, and the direction of the magnetic field is parallel to the direction of the magnetic field, then the magnetic flux passing through the plane where the closed loop is located is b*s, and the hinge of the magnetic flux is b*s*n

The weight capacity you require is already more than the average product and practical need. The maximum single weight we use on the door is 60 kg.

According to your description, the parallel door closure should use the swing door hinge, which is usually called the 90-degree hinge, this hinge has a damping hydraulic effect, there are also ordinary, you can choose according to your own use effect requirements, with damping to use quiet and silent, it is recommended to choose.