My computer gets two error messages when it boots up to the desktop

Start running msconfig start and find an option similar to what you said dtserv uncheck OK.

1, Start Run type: regedit, then press Enter2, select "My Computer", then click "File" "Export" and click "Save" with any name. The purpose of this is to back up the registry so that it can be restored in time after misoperation.

The way to recover this is to find the file you just saved, double-click on it, and select "Allow Import".

3. Select "My Computer", press the F3 key, then enter "dtserv", click "Find Next", after finding it, be sure to check whether it is a dtserv file, because the file name you gave is incomplete, if confirmed, click "right-click" on the item and select "Delete". At this time, you can enter dtserv to search, after the result comes out, you have to look at the following numerical part, not just look at the file name, as long as there is dtserv in the file regardless of whether it is written on the side of it or not (such as: dtserv, load), you have to delete!

4, and then press the F3 key again to delete, until it prompts "No corresponding option found".

5. Restart your computer and see if there is anything wrong with the system.

Note, if there are other serious problems, please restore the registry.

Use the optimization master, optimize the system performance, optimize the boot speed, and then select the one you said, click "optimize" and then restart it's OK

If you are afraid of trouble, reinstall the system.

There are many reasons for the blue screen restart of the computer, and it is recommended that you follow the following methods to troubleshoot them one by one:

1.Remove newly installed hardware devices, such as external cameras, printers, and memory including upgrades;

2.Try to click F8 to enter safe mode during the boot process, uninstall the previously installed software, and check and kill viruses in a comprehensive manner;

3.In order to fully rule out the possibility of software or system problems, you can back up the hard drive data and reinstall the operating system;

4.If blue screens continue to occur frequently after reinstalling the system, it is recommended that the machine be sent to a local service center for further testing.

You just wait for it to turn on, it's fine.

When the computer is turned on, there is a prompt to power the brain, and the problem is usually caused by the driver problem of the graphics card.

You can solve the problem by entering the safe boot mode to enter the desktop and uninstall the problematic drive, the steps are as follows:

1. After the computer is shut down, turn it on again, press the power to force it to shut down when entering the logo screen, and after the process is repeated three times, the computer will appear with an advanced option screen.

2. Click to enter the safe mode, the computer will reboot normally, enter the desktop, right-click on My Computer, and click on the Manage option.

3. Click Device Manager to view the device.

4. Click the graphics adapter at the bottom, uninstall the existing device driver from the computer, restart the computer, and the problem will be solved.

After installing the win8 system, sometimes there will be problems with the computer, prompting "Your computer has encountered a problem and needs to be restarted, we only collect certain error information, and then restart it for you." "In fact, such a problem is also a headache, and the system problem is generally caused by two reasons, first, software, and second, hard disk. In the process of computer maintenance, software is generally first, and hardware is second. Let me talk about the idea of solving this problem.

Tools Raw materials.

USB flash drive boot disk.

Handling ideas. Let's take a look at the prompt, "Your PC is experiencing a problem and needs to be restarted, we just collect certain error messages and restart them for you." "The previous system didn't have this feature. It's also a way for Microsoft to collect questions.

And this error message, the system will save this information in the file as shown below.

If you encounter such a problem, start with the software, open the management software, and disable the software that does not need to be started in the startup items.

Or enter the [mscofnig] command from [Run] to open [Task Manager] and disable the software that does not need to be started in the startup items. If it can't be solved, look down.

If disabling startup items does not solve the problem, then go to [Control Panel] and [Programs and Functions] to uninstall the recently installed software to see if there is a conflict in the installed software. If it doesn't work, then look down.

If that doesn't work, the only way to do this is to reinstall the system. In the end, if the system is installed, it can't be solved. That's the hardware problem.,The hardware problem is the only way to replace it.,There's not much to talk about here.,If you don't get it, it's best to send the computer to a professional repair point.。

end precautions.

The software requires patience, and if you don't have the time to be patient, it's best to find a professional to fix it.

This kind of prompt appears: generally after uninstalling the software or antivirus; There is no uninstall or deletion of clean software and file remnants. It is recommended that you **Windows Cleanup Assistant, let it help you clean up these software and file remnants.

**After installation, first upgrade to the latest version, open the software, click "System Scan", select all the scan results, and then click the "Perform Cleanup" button, if the software prompts you whether to "backup", select "Yes" (the backup is to prevent the occurrence of cleaning errors, if the system does not occur abnormal after cleaning, delete the backup), and follow the prompts to operate.

Here's how to delete it manually:

1) Start menu in the middle of the button.

Run. Enter msconfig enter, open the system configuration utility, look for a button in the startup project called ", if there is one, remove the hook in front of it, and press apply to OK (if it is not skipped).

2) Start menu mid-point.

Run. Enter regedit enter to open the registry, select and find a key-value item named ", delete it after finding it, find it a few more times to delete it cleanly, and then restart the computer.

3) Remove the auto-start item.

Start Run Enter regedit to open the registry, in turn.

On the right side, [hkey current user software Microsoft Windows CurrentVersion Run] is on the right side, see if there is an option you are looking for (, if there is a deletion, restart it.

There are several reasons for this error:

1. When the computer is being updated, force it to shut down and restart.

2. When the computer is updating, the power is off.

Solution: 1. Restart the computer and press F8 to enter"Advanced remediation options", select Last Correct Configuration.

2. Reboot and press F2 or F11,"One-click restore"After that, press "Deep One-Click Restore" or "One-Click Ghost".

What are you doing on your computer when it restarts, can you tell us about it? I'll tell you what you say more accurately.

Please tell me more about the performance of your computer before the restart, and your operation, it may be the restart caused by these operations, please ask me if you have any questions (I will re-follow you according to the information you provided).

Generally, the restart is caused by your own incorrect operation, remember not to do the operation that is easy to cause the restart. The computer should not operate at full capacity, that is, when playing games, watching **, **, and watching web pages at the same time, it is easiest to restart, freeze, and blue screen, so don't operate other things when playing games, watching**, **, and watching web pages.

No matter what you're doing, as soon as there is a sign of a card, stop what you're doing and quit the trial, so you don't restart, and if you still do, don't play or don't look at it.

In terms of hardware, the temperature of CPU and other hardware is too high, the memory is less than the card, the hard disk is bad, the voltage is unstable, and the hardware is not suitable.

90% of the reboot is caused by the improper operation of the computer, the card is the root cause of the restart, it is easy to cause the operation of the card not to do, it will avoid reboot or less restart.

Two scenarios:

First, the normal situation.

A temporary copy of a positive word document will automatically disappear when the document is closed and the program is often exited;

2. Abnormal circumstances.

1) The program is running and in the process of documentation, crashes, and forcibly exits the program;

2) When the document is being filed, the power is off, and the system does not close the document and the garbage is left;

Note: After the next boot of the system, do not open the document by double-clicking, but should restart the program group "Start-Program-Microsorft Word", and then, click the name of the document to be recovered on the left side of the window, and delete which "$..." after the system is restoredd.

This is a temporary copy! It's the equivalent of caching or something!

Solution: Direct f5, just refresh a few more times.