After my computer boots up, I have to wait a long time to enter Windows after entering the motherboa

In the situation you described, it is likely that the battery of the BIOS is dead, resulting in the failure of the CMOS setting, so every time you look at the machine, you have to display a prompt, spend 5 yuan to buy a 3V button battery, replace the original one on the motherboard, and after the replacement, reset the CMOS parameters and press F10 to save and exit, there should be no more such prompts. If you change the battery, there may be two reasons, one is that your computer's power supply is not grounded (try to change a grounded power socket), and the other may be that there is a problem with the CMOS circuit of the motherboard (it can only be sent for repair and testing).

There is an error in the motherboard settings, check it. Look at what the error is, most likely it's a floppy drive problem. Just set the floppy drive to none.

It is estimated that the motherboard battery is gone. It's good to change a battery.,It's the same (2032) yuan as the one on Wenqu Xing.,Open the computer case and look for it.。

Is the boot device in your BIOS set up incorrectly? It should be said that this process will be automatically skipped after only 1-2 seconds, and the first boot device preset in the BIOS settings will be automatically selected to boot.

You can refer to your motherboard's manual to set the correct section.

I. Second, the third start the device.

If you don't have a manual, you can go online to get a copy down, the BIOS interface of each motherboard is not the same, and it's not easy to say, or you just see if there is a word like first boot drive in it, select the hard disk in the back, and then press F10 to save it.

This situation is generally caused by the fact that it is difficult for the hard disk to detect when the computer is self-detecting. You can use HD Tune Pro to check whether there are yellow warnings and red errors in the health bar, and there is a general description below, according to the instructions to repair the hard disk.

It may be the effect of the boot screen.

There are too many programs to start running.

Start Run Enter msconfig

Startup Remove some checks that don't require startup items to boot up.

1) Reinstall the operating system first, don't install software, patches, drivers, etc., and see if there is still a problem with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

2) If it is caused by hardware problems, it is recommended to overhaul it.

If you have any questions, please ask me.

Try changing the startup items, and if it doesn't work, reinstall the system.

It should be the reason why the network boot is turned on. But it's best to take a picture and take a look.

There are too many boot items, resulting in the system running not smooth, you can set the prohibition of booting in the soft solution, or there are too many things in the C drive, resulting in slow system operation.

When reinstalling the system, don't install the software that comes with the system, but install the driver that was sent when you buy the machine!! And from installing 360 Security Guard to optimize the boot startup item!!

There is a problem with your BIOS settings. Turn off all the options that you don't need.,Even the optical drive is turned off when you don't do the system.,Don't let the BIOS automatically detect.,Turn off the floppy drive if you're old machines.。 If there is something you don't understand, you can go there.

This ** looks up and down, and it helps to set up the BIOS to a certain extent. If there is a problem with win, you can go to the run and type msconfig to check how many startup items there are? Generally, there are only a few systems that have just been made, and there are only more than 3 points in the pure system, too much is not normal, look at it slowly, only two or three are necessary, and the others can be turned off.