Computer Beginners! How to install a system for a laptop on a USB flash drive?

The U-tray system is simple.

2. Then use the ultraiso software to write the ISO image file to the U disk, in the boot menu bar, as a "hard disk image" to write, note, the capacity of the U disk is greater than your ** ISO file;

3. Go to BISO and use the USB flash drive as the first startup item to start the computer;

4. After starting the computer, it is completely foolish to install, and everyone on the earth will do it.

You go into the BIOS to see if you want to change the hard disk interface IDE to ATAAccording to the machine, according to the DEL or F1, different brands.

You need to bring your own win10 installation disk (U disk).

Reboot, when the boot logo appears, you can continuously click ESC to select the startup item (the product line is different, the entry shortcut key of the startup item is different, ASUS notebook is pressed ESC, desktop or motherboard is pressed F8).

Windows 10, like Windows 8, supports UEFI or non-UEFI boot (Windows 7 does not support UEFI boot).

For this installation of Windows 10, we recommend choosing UEFI mode boot, so that the subsequent partition format is a more advanced GPT format, if you choose non-UEFI mode boot (the fourth item in the figure below), the subsequent partition format is MBR, and up to 4 primary partitions will be created.

Install the system. After selecting Start USB flash drive in the startup item, the boot image begins.

Once you've selected settings such as language, keyboard, etc., select Next

Click "Install Now".

The installer is starting.

In the stage of verifying the key, you can enter the key directly, or you can choose to skip it temporarily.

Agree to the license terms.

Select Custom

Next, partition, [Windows 7 needs to click "Drive Options (Advanced)"].

Click New to allocate the size of the C disk, here 1GB=1024M, and allocate the size according to your needs.

If you need to allocate 100GB for the C drive, then it is 100 1024=102400, and in order to prevent it from becoming, you can add 5-10MB more

Here divide the 127GB hard drive into a partition, click New and click Apply.

Windows will automatically create a boot partition, select OK here.

After the C disk is created, the system reserved disk is automatically generated, so you don't have to worry about it. This partition will be automatically hidden after the system is done, then select the path of system C installation, and click Next.

If you have a lot of areas, don't choose the wrong installation path.

Files are being copied and prepared, and most of the next stages are automated.

The following diagram shows that all the steps are done automatically, and then they will be automatically restarted.

Windows will restart automatically, and the USB flash drive can be unplugged at this time.

Windows still loads the process automatically after restarting. During this period, it will be restarted several times, and the setup is being prepared.

When it is ready, it will restart, and it is time to verify the product key, and you can enter it directly if you have a key, or you can temporarily choose to talk about it later.

Quick to get started interface, choose to use Quick Settings.

Wait a moment. <>

At this point, the system is almost installed, create an account and password for this computer, and leave the password blank means that you have not set a password.

Next, the Windows settings are applied and wait for the final configuration to be prepared.

Windows is installed, so please enjoy it.

Automatically jump to the desktop.

Press the computer to turn on, then press F12, wait for the interface to open and select U5B to enter, and enter the U disk.

Put the system installer on a USB stick and install it on your computer.