What should I do if I can t install the software after flashing my 5230

Softbar: Enter* or * Require password on standby.

Hard: This method is generally used when the system is so chaotic that it can't be turned on

After powering off, press and hold the call button, the number 3 button, and the * button at the same time, and then press power on. Don't let go, at this point the phone has already started to format (some older models will have an English waiting note when the grid is displayed). Press one piece, don't let go of one, and wait for the phone to automatically turn on and ask for the input time to complete the grid.

This formatting is more thorough and does not cause invalid formatting.

Other: Turn off and press the * + power on button, and start the grid without any prompt.

Precautions: Sufficient power must be guaranteed when formatting, and generally it should be operated under full power. It's a good idea to uninstall all the software and see if you get any similar "system errors".

If there are no similar "system errors", then proceed to the grid. Do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Also, try to give priority to the soft grid.

The software part that was originally installed on the expansion card will be affected, so under normal circumstances, the important data of the expansion card will be backed up and then formatted, and all the programs saved in the E disk will be reinstalled after the format of the mobile phone is completed.

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management Remove the extension card Check if there is a system error Format the phone Install the expansion card Format the expansion card (the phone at this time is the purest basic system) Install the programs that need to be installed Restore contacts Complete.

c. Preparation before the grid machine and resume work after passing the machine.

1. Back up your contacts Open the Business Card Holder option Mark All and Copy to the memory card.

2. Format the mobile phone See a and b above for the operation method.

3. Restore Contacts Open the Business Card Holder option Copy from the memory card.

4. Use a card reader to back up the files that need to be backed up in the extension on your computer.

5. Format the expansion card with your phone.

6. Restore the English-Chinese dictionary thesaurus.

9. Adjust your phone settings.

10. Set the Data Management --- Memory Card option to back up phone storage, and keep a relatively clean backup of phone settings on the expansion card.

11. Install the required software.

The light grid machine has a fart use, and the upstairs is really a master, prompting "the component has been solidified in the system" means that the DIY firmware you brush has been solidified or contains the software or components you want to install now. It may also be caused by the absence of grid before flashing or the lack of hard space after flashing, resulting in the remnant of the previous system file.

Format the memory card before flashing, if you really don't want to format it, please use the mass storage mode to connect to the computer, and delete the 5 folders of sys, system, data, resource, and private in the card. After flashing, insert the memory card into the phone and hard-track the phone once. (Here is an explanation of why this is done, the card is taken out to flash the card to prevent accidental locking of the card when flashing, and the card is inserted after flashing because the hard grid will create some necessary files to the memory card.)

You can do it yourself if you want to brush what type of firmware.,There's a pure version.,Beautified version, etc.,I won't do it I'll teach you.。

Because the firmware version you are flashing has included and solidified the software you installed with your spirit, the installation is not solidified, it is OK, or when flashing, the third light will go out.

V21 and above need to be cracked,The following can be cracked by software,Details yourself on the Saipan J5230 forum。

Nothing can be installed! Is it that there is no certificate or that the software is corrupted.

What can't you install?

Installing the software for Symbian S60v3 does not have this problem.

Use your own method of sliding the town finch and solve it successfully! Anyone who installs 360 Guard can solve this kind of problem:

1.After updating 360 Guardian Zaoshi.

2.There's a super mode in the security protection.

3.Click to get root access (don't revoke the permission after getting it)4Get the software traffic management later by clicking below.

5.After opening it, you will find that you can control whether a lot of software can be connected to the Internet, and the next thing you have to do is to point out some of the software you don't want it to connect to the Internet, and the last two are all clicked

6.Here's the key.,Generally, the automatic installation of software is a software called ",Put the two behind the travel pants into all .,Your phone won't automatically install the software anymore.。

If it works for you, don't forget to like one! Thank you!

All right! I'll change it. Are you sure your memory card is not poisonous?

I recommend that you first use the computer's antivirus software such as 360 to check the memory card first, don't use the phone's software, or directly format the memory card, don't copy the things in the card (because the virus will also copy out of the finger brother, except for the virus you have checked and killed on the computer), but I also recommend that you format it directly... Don't install your phone first after you get stuck in it. Then the hard grid phone (note that it is a hard grid) After completion, if there is a problem, flash the phone, and re-flash the official firmware.

I don't think it's a firmware issue. There should be no problem after the hard grid.