The shearing machine of the shearing machine and the shearing, why the shearing machine shears the s

A shearing machine is a commonly used electric shaver. Its reel-shaped head and bristles flatten and shaved short. And when you use a shearing machine to shear the hair, sometimes you will find that some fine hair balls will appear after the hair is shaved short, which is the phenomenon of shearing strands.

The root cause of this problem is that the scissors are not sharp enough, and the hair will be elongated and tangled into small particles instead of being completely shaved. These tiny kink points of hair are called "wisps".

In addition, improper use is also one of the reasons for the appearance of wisps. For example, if you use a small tip or too loose teeth, it will be difficult for the parsley to develop short hairs and smooth skin, which can lead to the appearance of strands. In addition, the scissors are also machined into a chain, which is softer than normal grinding scissors, resulting in an increased chance of the occurrence of wisps.

Therefore, when using the shearing machine, it is necessary to pay attention to the direction of shaving, and clean the cutter head in time to avoid the phenomenon of wisps.

This could be due to several reasons:1. According to today's headline information, the hair length is not enough: when the tooth spacing of the scissors is greater than the hair length, the hair ball will be cut out, and if the tooth spacing on one side of the scissor is greater than the other side, the phenomenon of hair scissors will be more obvious.

2. Excessive pressure of the weighing pan: The weighing pan refers to the "fixed frame" composed of the animal's ** and the early ants in the hair hole, which can control the length of the hair, if the weighing pan may be too stressed, it will cause the hair to be pulled and twisted, increase the tangled and shortened, and finally produce a hair ball.

3. The cutting edge of the scissor head is not sharp: if the cutting edge of the scissor becomes dull, a lot of filamentous fine hairs will be cut, which are easy to be wound into a hair ball.

1. The shaving machine, also known as the shear, is used to trim the hairballs on the surface of cotton wool clothes because they have been worn for a long time.

2. In addition to trimming the hairball, it can also suck out the dust and other debris in the sweater, which is suitable for all kinds of clothing, woolen sweaters, fleece sweaters, blankets, thread jackets, scarves, socks, etc. and all kinds of woolen wire products.

3. The range of use is very wide, the working principle is similar to that of electric shavers, built-in blades, metal mesh cover, and at the same time has the function of adsorbing dandruff, and the removed hair balls are automatically gathered into the hair ball collection box for easy cleaning.

The above dust ruler is what I introduced to you about the shaving machine, I believe that you will have a certain understanding after reading it.

Shearing machines can be divided into two categories: mobile and stationary according to the way they are used. The former is suitable for mobile shearing in vast pastoral areas, and the latter is suitable for large pastures where sheep are concentrated. According to the driving mode, it can be divided into three types: mechanical, electric and pneumatic.

The mechanical type is suitable for pastoral areas without power supply, and is driven by a diesel, gasoline or tractor power take-off shaft, and a number of shears are driven to operate simultaneously through a flexible shaft or joint shaft transmission device. The electric type is driven by a small motor through a flexible shaft or joint shaft transmission device, or a micro motor is installed in the shears handle, and the blade is driven by a variable speed gear. The pneumatic type uses compressed air mixed with lubricating oil to drive the motor in the handle of the shears to make the moving blade swing back and forth for shearing.

The gas not only lubricates and cools moving parts, but also blows away sand and dirt from the blade or mixed with wool, thus extending the life of the blade.

In order to solve the problems of fast wear of shearing blades, high noise and vibration of shearing heads, and to improve shearing efficiency, research is being carried out from the following aspects: Improve the speed, material and processing accuracy of the shearing machine; Adopt new materials and new processes, such as replacing multi-layer steel wire flexible shafts with nylon flexible shafts; Improve the knife grinding device, adopt long hook grinding knife holder and magnetic knife grinding frame to improve the quality of knife sharpening; New methods of shearing are used, such as the use of drugs to shed the wool, the use of laser shearing machines or automatic shearing tables controlled by electronic computers.

1. The shaving machine, also known as the shear, is used to trim the hairballs on the surface of the clothes because they have been worn for a long time.

2. In addition to trimming the hairball, it can also suck out the dust and other debris in the sweater, which is suitable for all kinds of clothing, woolen sweaters, velvet shirts, blankets, thread clothes, scarves, socks, etc. and all kinds of woolen wire products, the range of use is very wide, the working principle is similar to that of electric shavers, built-in blades, metal mesh covers, and at the same time has the function of adsorbing dandruff, and the removed hairballs are automatically gathered into the hairball collection box for easy cleaning.