What to do if your computer s wowos is corrupted

Hello,1、It may be that there is an incompatibility between the system or programs,Boot press f8 to the advanced option to appear in the let go,Select "the latest correct configuration" Enter to repair,It is not possible to press f8 to enter the safe mode to restore the system or reinstall the system。

2. The CPU or other hardware temperature is too high, and the memory and graphics card are incompatible or faulty.

3. If the hard disk has bad sectors, please use the system's built-in functions or software to repair the disk, or format the hard disk to repartition and reinstall the system. 4. Power failure and voltage instability can also cause automatic restart.

5. Incompatible drivers can also lead to restart.

6. Failure of motherboard parts.

7. Change the default automatic restart of the system: right-click on My Computer Properties Advanced Settings in Startup and Failure Recovery Remove the check mark before "Auto Restart" in System Failure, and then press OK and Apply to restart the computer.

8. If the above methods are ineffective and you can't find the problem, it is recommended to overhaul it.

In this case, the system needs to be reinstalled.

This situation is caused by the loss or corruption of system files, and the system must be redone, otherwise it cannot be solved.

Reinstall the new system, there's no way to deal with it.

Hello friend, you find that file, delete it and take a look, I think deleting it will not affect Kingsoft Guardian or Kingsoft Poison, otherwise you can right-click on the C drive, Properties, Tools tab, check the error, and then you tick the first checkbox, press start, and wait for it to finish.

Solution 1: Check disk errors.

1,Since the prompt message shows "Please run the chkdsk tool", of course, the first method is to perform a disk self-test, it prompts that disk, which disk to check, generally C disk is more common, there are also D disk situations, because many people will install applications on D disk.

The disk self-test method is as follows: first select the local disk (x:), then select "Properties" in the right-click menu, select "Start Check" under "Tools" in the disk properties window, check those two items in the next box that pops up, and then press "Start", and the disk self-test will be carried out immediately.

Tips: X: represents a certain disk, if it is C disk to check the error, it will prompt that the disk check must be carried out the next time the computer is turned on, this is because, if there is a program running on this disk, it cannot be checked, and the disk check can only be carried out in the state that all programs are not running, and this situation may also occur in D disk.

Solution 2: Clear the web cache.

1. Sometimes after using chkdsk check (chkdsk is disk self-test), it still can't solve the problem, so use the following method.

There are a lot of error problems, which are caused by web caches, you can clean up these web caches, clean up the steps: open the browser - > Tools - > Internet Options - > browsing history - > delete.

2. Tick the options such as Temporary Files, Cokie, History, Form Data, Password, etc., and press "OK".

Four words can't explain the problem, try to describe it clearly.

If the machine has an integrated graphics card, look at the motherboard if it is plugged in incorrectly.

If the machine is still fine, then it may be that the memory module or graphics card has been loosened, or it has rusted for a long time, or the environment is humid and has poor contact or dust.

Take a dry towel, toilet paper, wipe the memory module or the small copper piece (gold finger) of the graphics card, and then reinsert it.

If the environment is humid, then you need to take a hair dryer and blow it on the machine.

If dust enters, then it needs to be solved with a brush and the above method.

If the equipment is old and rusty, then see if it can be remedied by the above methods, and it can't be replaced.

If there is no problem, then it may be a problem with the motherboard, use the above method to try the motherboard again.

In most cases, the BIOS is entered after booting due to the inability to detect the hard disk.

You can select the boot menu to see if there is no hard disk in the boot sequence.

If not, open the case to check if the hard drive connection is loose and the contact is not good.

The picture above is the main interface of the motherboard BIOS, press the ESC button directly to exit and continue to boot. If you still automatically enter this interface next time, you can switch to the startup page in the above figure to check whether the motherboard correctly recognizes the hard disk, that is, whether there is a hard disk model in the boot device. If not, turn off the hard disk and open the chassis, and check whether the hard disk data cable and power cable are well connected.

This is just a BIOS interface! Just quit! There are still other errors.

Look at the system time display 2016, guess that the motherboard battery is out of power resulting in the loss of BIOS settings, boot directly into the BIOS interface, the solution, change a motherboard battery.

Either the computer is poisoned, or the computer's hard drive is not working, and a new hard drive is replaced.

Did you delete the system files?

If so, it is recommended that you redo the system.

This prompt is caused by too many temporary files in the system, or a disk problem, take a look at the following methods.

1) This prompt appears in the lower right corner of the taskbar (a file is damaged, please run the chkdsk tool to repair it), it is generally caused by too many junk files in the system, and the pure letter is mainly a junk file generated by the Internet, just clean it up.

Open a web page, click on the "Tools" menu on Internet Options under the "General" tab and click on "Delete cookies(i)", delete files in the "Delete Files" pop-up, click on "OK" (including offline files), and restart your computer (no need to use the chkdsk tool that prompts).

2) The system comes with the disk repair method: (If the fault is still there, that is, there is a problem with your disk, please repair the disk, and repair each disk).

The specific steps are as follows: select the drive letter in My Computer, right-click the mouse, select Properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically Fix File System Errors" and "Do Hungry Wheel Scan and Recover Bad Sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing the above method, a box will pop up, the point is, repair after automatic shutdown).

3) If it still doesn't work, it may be that there is a problem with the hard disk, try to repair it with software. Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

4) If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

Sogou uninstalled it, and the installation directory was also deleted, and then restarted and reinstalled.

The easiest way to do this is to reinstall it.

Reinstalling the system is the easiest.

Turn off the computer, disassemble the case, see how many memories there are, remove a memory module and then turn it on, don't change the memory socket, plug it in and then Song Qi Xiao to try the wild draft, no, Zichang only send the computer store to reinstall, you can copy out the important information before reinstallation.