How to share wifi on win10 computer

Method steps.

Click the function menu in the lower right corner of the computer taskbar - [All Settings] and click [Settings] - [Network and Internet].

Wi-Fi - [Manage Wi-Fi Settings].

If the laptop has been connected to a WiFi network, it will be in the list of managed known networks.

Click on the wifi where you have ownership, i.e. you know the password for this wifi, and click on share.

Enter the password for this wifi and tap Share.

First of all, make sure that the computer is connected to the Internet, wired, wireless, and broadband. Some network environments are unavailable (e.g. city hotspots).

The specific steps to create a wireless hotspot under Windows 10 are as follows:

1.Win + X Select the Command Prompt (Admin) menu.

2.Select Continue and the cmd window pops up.

3.Enter the main command here.

netsh wlan set hostednetwork mode=allow ssid=hello key=12345678

Main instructions: SSID=name of the wireless (it is recommended to use English or numbers to avoid compatibility issues).

key=wireless password (also in English or numbers, minimum 8 digits).

If there is no problem with the input, there will be a prompt message in the following figure after entering, if an error is reported, please try again, and pay attention to check the spelling.

4.After the above settings are completed, you need to turn on the wireless function and use the following command.

netsh wlan start hostednetwork

If there is no problem, there will be the following prompt, if there is an error, please check the input and operate again.

5.Now that the wireless has been set up and enabled, other devices can search for the wireless signal of "hello" just created, but they can't access the Internet yet, so you need to set it up next.

Open the Network & Sharing Center (right-click the mouse at the wireless logo in the lower-right corner of the desktop).

On the left-hand side, find "Change adapter settings".

6.In the new window, select the NIC that is currently connected to the network, and the following figure takes the wireless NIC as an example

Note: If it is a local wired, please select the local connection in the connection state, if it is a broadband network, please select the broadband connection option, if there is a wireless network card, please select the network card of the wireless connection (the local connection*3 in the figure below is the wireless information that you have virtualized, and you can recognize it as the virtual network card you just created by looking at the name).

Then select the current network card with the mouse, right-click and select "Properties" - "Sharing", check "Allow other network users to connect through the Internet connection of this computer", and then confirm.

Next, you can use your device to connect to this wireless hotspot.

1.Boot into the system. Right-click the starting position and select the Settings option.

2.Select Network & Internet

3.Click [Mobile Hotspot], and click the option on the right to turn on the mobile hotspot function.

4.After selecting the network connection you want to share, you can press [] to change the network name and password frequency band you want to share.

5.The name of the network to be shared by the closed wheel password frequency bandThe name of the network to be shared by the password frequency band.

6.After the date is completed, you can see the device that is connecting to this mobile hotspot on the function page.

The method of sharing WiFi on your computer depends on your computer's operating system and network connection. In general, there are several common methods:

If your computer is Windows 10 and you are connected to a wired or wireless network, you can set up a mobile hotspot to share WiFi. The specific steps are as follows:

Select Start, then select Settings> Network Failure and Internet, > Mobile Hotspot.

For Share my internet connection from, select the internet connection you want to share.

For Share by, select how you want to share the connection via Wi-Fi or Bluetooth.

If you choose Wi-Fi, you can set a network name and password and have other devices connect to the hotspot.

If your computer is Windows 7 or Windows 8 and you are connected to a wired network, you can share WiFi by setting up a wireless temporary**. The specific steps are as follows:

Open the Network and Sharing Center, either by clicking on the networking icon in the lower-right corner of your computer, or by opening it from the Control Panel.

Enter a network name and password, then click "Next".

Select "Scrambled Internet Sharing" on the left, and then click "Wi-Fi Options" on the right to select the Internet connection you want to share.

Tick the option "Allow other network users to connect through this computer's Internet connection" and click "OK".

If your computer is a Mac system and you are already connected to a wired network, you can share WiFi by setting up internet tethering. The specific steps are as follows:

Tap "System Preferences" and then "Share".

Select "Internet Sharing" on the left, and then click "Wi-Fi Options" on the right.

Enter a network name and password, then click OK.

In the "Share your connection from other computers" drop-down menu on the right, select the Internet connection you want to share.

On the right side of the "To share your internet connection through the following ports" list, tick the "Wi-Fi" option.

Tap the checkbox next to "Internet Sharing" in the top left corner and tap "Start" to confirm.

1. If you are a laptop computer and have wired Internet access, you can install the wifi wizard to virtualize the built-in wireless network card into a wireless hotspot for other computers or devices to share the network wirelessly.

2. Buy and use portable wifi to achieve wireless sharing.

3. Buy and use a wireless router, connect it correctly and set it up, all your computers, mobile phones, and tablets can share the network wirelessly.

The last of these three methods is the most stable, and the input cost is not high, and there are forty or fifty cheap wireless routers, and it is very good to choose about 100 yuan for general households.

Tool: win10

Here's how to do it: 1. Click the network right button on the desktop, and click Change Adapter Settings in the window that comes out.

2. Right-click on WLAN and then click Properties.

3. After entering the WLAN properties interface, click the sharing option, and check Allow other network users to connect through the Internet connection of this computer. Then under Home Network Connections, select Tron Hotspot Virtual NIC. The name of the virtual hotspot NIC is generally as follows:

Microsoft-managed network adapters.

4.Click on the free wifi to install, and after the installation is completed, the interface as shown in the following figure will appear:

5.Set the Wi-Fi name and password, and you can access the Internet after connecting to Wi-Fi.

1. Right-click on the start menu, select "Command Prompt (Administrator) (A)", and run the cmd command prompt as administrator.

2. Enter netsh wlan set hostednetwork mode=allow ssid=jayfan key=12345678 in the command prompt, and press enter to execute the command. (Of course, you can directly copy the command and then paste Ctrl+V into the Win10 Command Prompt, because Win10 supports the Ctrl+V operation of the Command Prompt).

3. After waiting for a while, a wireless network card named "Microsoft Virtual WiFi Miniport Adapter" will appear on the "Change Adapter Settings" interface in the Network and Sharing Center. As shown in the figure below.

4. In the Network and Sharing Center, find the network that has been connected to the Internet normally, click on it, in the properties, select "Sharing", and check "Allow other network users to connect through the Internet connection of this computer". And select the virtual wifi "Microsoft Virtual WiFi miniport adapter" for the home network connection, and the stand-alone "OK".

5. Wait for a while, enter netsh wlan start hostednetwork in the command prompt of the administrator privilege you just opened and press enter.