Laptop network sharing to wireless routing!! Networking experts go into 50

Find a router that supports AP or buy an AP transmitter directly, and any binding IP is a floating cloud. If your laptop supports AP, you can also open it directly. What does AP know?

If you don't know, I'll hear it. Hehe. My network cable is separated from the landlord's route, I bought a miniap, my computer plus two, and I can only use one IP to access the Internet.

Take win7 system as an example to introduce the method:

1: The wireless Internet access of the laptop must be normal, and the other computer must have a wireless network card.

2. Make sure that the wireless network of the other party's laptop is turned on.

Three: Turn on the laptop wireless network connection, open the network and sharing center.

Four: Select Network & Internet in the Control Panel, click Network & Sharing Center and select Set up a new connection or network.

Seven: Enable the Internet Connection Sharing button to turn on the sharing network.

Eight: Click the Close button to complete the wizard.

Nine: Windows7 wireless network sharing settings are successful.

If you don't know whether your computer is win7 or XP operating system win7, connect to the wired, manage the wireless network - add - create a temporary network - fill in the network name key, save the network, and finally put the shared hook on the line, others can connect your network name wirelessly to the Internet.

XP goes the extra mile and sets your own wired properties to shared hopefully it will help you.

1. Connect notebook A locally for sharing;

2. Then set the IP address of the wireless network card of notebook A subnet DNS and then set the wireless IP address on notebook B, set it to be in the same subnet as A, and the gateway is set to the interface address of A. DNS these.

aEstablishment of a wireless network.

SSID: Naming.

Network Authentication WEP Shared Open.

Key: It is a wireless lock.

No. It is necessary to connect the network cable of the Unicom operator to the WAN port. The local connection IPs of all three of your computers have been changed to be automatically acquired. Go to the router settings. Enter the account password given to you by Unicom. If not. It's a dynamic IP.

First of all, you have to be on a computer, in the browser, or yes, and then another login window, you enter the account is admin password is also this, and then you go in and enter your Netcom account password directly to the next step. Until the end ...

Plug in the main line on the WAN port, and then plug in other computer network cables on the other ports!

My classmates and I used the router to surf the Internet, and there are setup instructions in the router.

I've had this problem and I recommend a few solutions.

The first. What firewall software have you installed, or uninstalled, but the removal is not complete, find your wireless management in your network and sharing center, delete all, go to the wireless model in the configurator, right-click on the properties to view the protocol package, and delete the remnants of the firewall. on restart.

The second, wireless driver update, upgrade to the latest version, generally speaking, the driver will not affect the Internet, it may be that the driver is damaged, it is recommended to reinstall it.

The third is the Trojan, some Trojans will monitor the wireless network, the more obvious is that the wireless is unstable, and it is useless to be close to the router.

Fourth, the boot startup item is banned, this one appears relatively small, just check it.

Turn on your laptop's Wi-Fi switch fn+f5 again.

You don't have any software installed, is it a conflict?