-
Do 3D, CAD and PS, because it's a peer, so I have some views on your configuration: let's say it backwards.
First, the keyboard and mouse, with a 50 yuan suit, there is really no need to waste more than 100 yuan.
Second, the power supply must be 440W, it depends on the model when installing, if it is 440W 290** can be, in fact, in our this is 260.
3. Needless to say, the chassis is beautiful.
Fourth, you work or go to school, I suggest LCD to choose TPV, only 1100+ yuan, very cost-effective, very affordable, the effect is relatively good. (Actually, in theory, liquid crystals are not used for design.) )
Fifth, optical drive, don't use Samsung's to kill, other LCDs, BenQ or whatever, don't buy Samsung. (I used to use Samsung Light Sculpture, and I changed it four times a month, and I was very sad).
Six graphics cards are expensive.
7. Hard disk 160, 580 yuan.
8. Memory, the upper two 512m are suitable, I personally think. The two 512m are 130 + 130 = 260
9. I won't talk about the motherboard and CPU.
Fix it, don't buy a branded machine.
-
What does it mean to carry? You don't use a notebook?
This configuration is good,**It won't be much worse,Graphic design to choose a good graphics card,It's best to buy a good brand machine。
-
The graphics card really needs to be improved, and everything else is pretty good.
-
Memory with 2 x 512;
The graphics card is changed to a big brand, and it is close to 1,000 yuan. The larger the memory, the less the rendering time.
Samsung burners are not so good.
It is not recommended to use LCD screens.
-
I agree with the third floor. That's what I did, and he was right
-
First of all, take a look at what the prompted program is, it may be that there is a problem with this program, if it is uninstalled and reinstalled. If there is a prompt at boot, you can remove the boot start of this program. If you can't find it, you can recall what program software, plug-ins, patches or drivers you had before this kind of failure, and if you want to uninstall them first.
If you can't find it, it is recommended to check and kill the Trojan horse and repair the system.
1. Please use the system's built-in system restore to restore to the time when you do not have this failure (or use the restoration software to restore the system, if you can't enter the system, press F8 to enter the safe mode to restore the system).
2. If the fault persists, use the system disk to repair it, open the command prompt and enter sfc scannow Enter (there is a space between sfc and ), insert the original system disk to repair the system, and the system will automatically compare the repaired ones.
3. If the fault persists, set the optical drive in BIOS as the first boot device, insert it into the original system installation disk, press the R button, and select "Repair Installation".
4. If the fault persists, it is recommended to reinstall the operating system.
In terms of hardware, use software to test whether the temperature of the CPU is too high, whether the hardware has been upgraded recently, clean the dust, and replug the memory and other hardware.
-
The rate depends on the rate of your upper level, you use the company's wifi is generally used after work, the company does not use the office computer after work, the network speed you get should be on par with the company, buy a high-power wireless network card about 90 yuan (tao treasure price).
-
Buy a mainstream router, use the WDS function to receive the signal from the transmitter, and then plug the network cable into the receiving router, set it up and go online, and continue to ask questions if you have any questions.
-
Buy a good wireless network card directly, plug it into the desktop, install the driver, and you can directly connect to your company's wireless network, which has the same effect as the wireless network card of the notebook. Hope to adopt, thanks! , look at the broadband of your door company a few m.
-
The upgrade potential of the G31 motherboard is limited, and it was originally intended for you to reconfigure a new console, but you said that the budget is not very large, so let's make do with the upgrade:
1. The motherboard of the G31 chipset has not very much potential for upgrading, and the memory frequency it supports is only 800MHz. At present, the CPUs that can be equipped are all LGA775 interfaces, respectively:
Pentium E5400 (memory frequency 800MHz about 70 yuan),
Pentium E6600 (memory frequency 1066MHz about 100 yuan),
Core 2 E8400 dual-core (memory frequency 1333MHz 150 yuan or so),
Core 2 Q9300 quad-core (memory frequency 1333MHz about 350 yuan) and other models.
If you just plan to upgrade it simply, the old host will be eliminated after another year and a half, then you can match a processor like Pentium E5400, the memory working frequency is very matched, and it will not cause a waste of CPU performance.
If you want to upgrade significantly, then the G31 motherboard can also be equipped with Core 2 Q9300 This classic quad-core processor, Core 2 Q9300 Quad-core main frequency cache 6M, second-hand ** is about 350 yuan, this quad-core CPU performance is relatively close to the second-generation i3, but affected by the memory frequency, it will reduce the performance to use, a little not cost-effective.
-
First of all, you have to change the graphics card! Minimum memory to 4G memory! It is recommended that you reinstall the high configuration of the table!
-
1. Unplug the memory and plug it in once.
2. Clean up the IE cache, for fear that there are viruses hidden here.
4. Use 360 Guard to repair the system--- repair the system Clean up the pure plug-in--- clean up the plug-in.
Clean up the garbage--- clean up the garbage.
5. Start--Run Enter cmd in the open command prompt (you can copy and paste).
for %1 in (%windir%\system32\*.dll) do s %1 press enter.
You can see that the names of many files are refreshing, flashing, not flashing, you can close it, restart the computer.
6. Software or game bugs You can reinstall them once or upgrade them.
8. If there is a backup system, please restore it once or reinstall it again (it is best to install the XP system that is late in the installation version, and the stability is better).
This sentence is to say that one of your memory units is occupied by a program can not be written and read correctly, caused by many reasons, it may be a program conflict or viruses and Trojans occupy the memory, so, according to your current prompt, there is no solution that really has a direct effect, you have to try, use the latest antivirus software for comprehensive anti-virus, in safe mode, or do a dos anti-virus disk to kill the virus under the dos, and you can try to redo the system after the grid.
I'm confused by your narrative. It's too simple. It's too unspecific. >>>More
In web page production, we often encounter such a problem: once the resolution is larger and the window is maximized, the layer is misaligned. When you insert a layer with a menu, the layer is positioned relative to its parent element, and as soon as you move it, it immediately becomes absolute. >>>More
4000+ or 4400+ is OK, 4000+ is below 500, 4400+ is about 500, the motherboard is now a lot of AMD770 chipset boards, and the CPU above is quite matched, about 500, the graphics card can make 7600GT faster, most of them are also about 500, and 1G memory is now more than 100 points. >>>More
It should be that you have too many boot projects! Is there a 360 security guard? There are no ** ones! Just go inside and remove the unnecessary boot startup items! Just leave the antivirus software and other software that protects the system!