The installation steps of street lamps are to erect the lamp pole first, and then install the lamp h

The steps of street lamp installation are usually to erect the light pole first, and then install the lamp head.

First of all, the installation of street lights requires the selection of a suitable position to erect the light pole. When choosing a location, you need to take into account factors such as the width of the road, traffic flow, pedestrian traffic, and the surrounding environment. Generally speaking, the spacing of street lights should be determined according to the width of the road and the lighting requirements to ensure the lighting effect and safety of the road.

Next, you need to prepare the light poles. Light poles are usually made of steel and have a certain height and strength to carry the lamp head and provide stable support. Before the pole can be erected, the foundation needs to be constructed to ensure that the pole can be firmly fixed to the ground.

The depth and size of the foundation should be determined according to the height of the pole and the geological conditions to ensure the stability and safety of the pole.

Then, mount the lamp head on the light pole. A lamp head usually consists of a lampshade, a bulb, and a power supply, among others, which are used to emit light and provide lighting effects. When installing the lamp head, you need to fix the lamp head on the top of the light pole and connect the power cord.

In addition, it is also necessary to adjust the angle and direction of the lamp head to ensure the rationality and uniformity of the lighting range.

Finally, the electrical connection and commissioning are carried out. Connect the lamp head to the power cord and test the electrical connection to ensure that the street light can work properly. At the same time, the brightness and illumination range of the lamp head need to be adjusted to meet the lighting requirements and energy saving requirements.

In general, the steps of street lamp installation are to erect the lamp pole first, and then install the lamp head. Standing a light pole can provide stable support and fixation, while installing a light head can provide lighting effect and security. Such an installation sequence can ensure the stability and illumination effect of the street lights, and improve the safety and comfort of the road.

Install the lamp head first and then erect the light pole.

Although the components of solar street lights are simple, there are a few points that need to be paid attention to when installing lamps. In this way, we can ensure the normal operation of solar street lights. Provide convenience for production and life.

First of all, before installation, the various components of the solar street lamp should be installed and fixed, to ensure that each connection point and joint are firmly installed, and then the installation of the lamp pole is carried out.

This avoids the hassle of disassembling the lamphead again if it does not work.

In addition to safety precautions, it is also necessary to ensure that the installation angle is correct so that the battery components can work without obstruction.

The above problems about the installation of solar street lamps and lanterns are only part of the installation process, in order to ensure that the solar street lights can work normally, there are many precautions that need to be summarized in the specific work.

As far as we know, the installation of street lights: the installation position of the lamps and lanterns should be located in accordance with the station number on the design drawings, and fine-tuned in individual places according to the actual situation, but should be approved by the builder and the designer. When excavating the foundation pit of street lamp poles, the surrounding pipeline conditions and geological conditions should be fully considered.

When pouring the foundation of the street lamp pole, it must be supported by the formwork and ensure that the upper plane of the lamp base is level. The base plane of the lamp is 200px lower than the plane on the curb stone, and the anchor screws expose the plane of the base of the lamp 125px. After the installation of the street lamp, the foundation of the street lamp pole should be encapsulated.

The foundation of the street lamp pole is poured with C25 concrete, and the stone is pounded with a plug-in vibrating rod. The battery room should be constructed in strict accordance with the relevant technical requirements and specifications. After the installation of the street light pole, the grounding wire should be reliably connected with the grounding electrode and the street lamp pole.

After the backfill earthwork is excavated, it should be cleared in time, civilized construction, and cleared on the same day of digging.

As far as we know, how to install street lights, different types of street lamps are installed in different ways, for example, family workshop type: equipment investment of about 10,000 yuan, the need for dip welding machine, lamp head riveting machine, assembly table and multimeter, constant temperature welding station, heat gun, temperature gun and other common electronic tools. Small-scale factory type:

The equipment investment is about 150,000 yuan, which requires semi-automatic printing machines, reflow soldering, dip welding machines, assembly lines, aging lines and common electronic testing equipment. Medium-sized and above automatic production lines: the equipment investment is about 800,000 yuan, which requires automatic printing machines, automatic placement machines, reflow soldering, dip welding machines, assembly lines, aging lines and common electronic testing equipment.

As far as we know, street lamps refer to the lamps that provide lighting functions to the road, and generally refer to the lamps and lanterns within the range of road surface lighting in traffic lighting. Street lamps are widely used in various places that need illumination. Next, I will introduce to you what are the types of street lamps and the installation methods of street lights.

What are the types of lamps, according to the height of street lights: high pole lights, medium pole lights, road lights, garden lights, lawn lights, buried lights; According to the material of street lamp poles: hot-dip galvanized iron street lamp, hot-dip galvanized steel street lamp and stainless steel street lamp; According to the source of street lights:

Sodium lamp street lamp, LED street lamp, energy-saving street lamp, new Suoming xenon street lamp. According to the model: Chinese lamp, antique lamp, landscape lamp, single-arm street lamp, double-arm street lamp.

According to the power supply mode, it is divided into: city circuit lamp, solar street lamp, wind and solar complementary street lamp. Street lighting involves lighting technology and is suitable for street lighting.

The purpose is to design a high-efficiency electronic energy-saving street lamp with long life, low power consumption, high power factor and low current harmonic content. This high-efficiency electronic energy-saving street lamp comprises sequentially connected power grid high-voltage discharge branch R1, C1, rectifier bridge D1-D4, power factor correction branch C2, D5, D6, high and medium frequency burr filtering branch L1, L3, high-frequency oscillation circuit BG1-BG2, starting branch L2, C7 and lamp tube T; It can save 80% of electricity compared with the previous street lights; The harmonic content is 25%, which can prolong the life of the lamp by 3-4 times. The installation method of street lamps, the installation height of street lamps at the same location (from the light source to the ground), the elevation angle, and the direction of the lights should be consistent.

The longitudinal centerline of the lamp installation and the longitudinal centerline of the lamp arm should be consistent, the horizontal line of the lamp should be parallel to the ground, and there should be no skew after fastening. The lamp head is fixed firmly, the adjustable lamp head should be adjusted to the correct position according to the design, the wiring of the lamp head should meet the regulations, and various nuts should be fastened, and gaskets and spring pads should be added.