What is the reason why the tablet crashes as soon as the screen is locked

Dear Taipower users, hello.

1. You can go to Taipower's official **.

2. Open the upgrade tutorial, there will be a detailed process, please follow the upgrade tutorial prompts.

3. If you still don't understand, it is recommended to call Taipower technical support**020-38731788.

1. You can first see if there is a type of problem after installing a certain software, if so, you can try to uninstall the software to solve it;

2. If it is not the first case, you can try to restore the factory settings of the machine;

3. If the second method is still invalid, you can decompress it according to the model ID (behind the fuselage)** according to the driver on the official website of Taipower - tablet firmware program, and you can upgrade it according to the detailed upgrade tutorial;

4. The above three ways can solve most of the software and system problems of Taipower, if you still can't solve your problem, it is recommended that you contact the seller or after-sales service outlets.

Hope it helps.

The solution to the crash of the tablet computer is that you can press and hold the power button for 10 seconds or poke the reset hole in the back of the fuselage with a toothpick, and then restart it.

There may be the following reasons why the tablet computer crashes:

1. There are too many programs to open the Silver Sox, and the multi-program operation will occupy most of the system running memory, which can be closed through the background. Close the background method, select Settings Orange, click on the Application option, select Manage Applications, click on the Running option, click on the name of the software you want to terminate running, and click Stop.

2. Restore the factory settings, and back up the important data in the machine before restoring.

3. If the fault persists after the above operations, you can try to upgrade the firmware.

1.Click "Start Settings Control Panel Power Options Advanced Power Management" and check "Enable Advanced Power Management Support" if your machine supports advanced power management features;

2.Click "Start", and run "regedit", then find PowerDownAfterShutdown in hkey local machine software microsoft windowsnt currentversion winlogon and set the value to 1;

3.The reboot will be successful.

Note: If your machine doesn't support advanced power management, unfortunately you'll have to manually cut off the power when the system is turned off and says "It's safe to shut down now".

Another: Wonderful way to solve win98 me can not shut down.

Both Win 98 and Win Me have such a problem: when the system is used for a period of time, when the system is shut down, it will stay on the screen of "the system can now be shut down normally", and the system can only be shut down by manually pressing the power button of the case.

Many newspapers and magazines have provided solutions to this problem, which can be summarized as follows: install Microsoft's shutdown patch, check if the advanced power option is turned on, and check whether the shutdown sound file is corrupted. However, the author's many experiments have proved that when this happens, these methods may not be effective.

The author's original solution was to restore the system with ghost, and then figured out the following method, which is simple and practical, and is now organized into a document.

1.Create a new text file and rename the file to ". The next step is to replace the system-generated file with this 0-byte "file".

2.Press "Start Run" in turn, enter "sfc" in the "Open" dialog box to run "System File Checker", click the "Extract a file from the installation floppy" option, press the "Browse" button, select the newly created "file" just now, press the "Start" button, then the "File Extraction" dialog box will appear, enter the directory where the file is located in "Restore From", such as "C:", or press "Browse" on the right to select; In the "Save File To" section, enter "System Drive Letter Windows" directly (you can also press the "Browse" button on the right to select); Once you have filled in both fields, press the OK button and start replacing the newly created File with the System Itself. During this process, there will be a prompt of "whether to back up the original file", just press the "skip" button. Finally, when the dialog box asking you to restart the machine pops up, press "Yes", and the computer can be shut down normally after restarting.

If the fault is not eliminated after following the above methods, please first rule out the shutdown sound effect file corruption and other factors. If it still can't be solved, then please press the "F8" key when booting up, select "Safe Mode" in the boot menu to boot, and then restart the system again.

Tablet PCs require a relatively large charging current, and low-quality power banks cannot provide a large charging current.

However, the output current of some power banks is too large, exceeding the rated current of the computer.

Occasionally, it is normal to get stuck in the screen, solution 1: find the small hole of reset in the back, and use the tooth hole to tie it.

2.Wait until the battery runs out and automatically turn off, and then charging will be normal.

3.Plug it in and see if it shows charging, and after a while, you'll be fine.

4.Contact the pants seller and flash the machine.

1. The software is incompatible, or caused by computer hardware. The data can be cleared (invalid is a hardware failure and needs to be sent for repair).

In the shutdown state, press and hold the volume plus key and the shutdown button, and let go when the boot screen appears, and enter recovery.

Go to Recovery >Chinese>> >> Clear Data >> Empty all data.

2. Recovery mode refers to a mode that can modify the data or system inside the Android machine, in this mode you can flash the new Android system, or backup or upgrade the existing system, or you can restore the factory settings here.

Hello answer, I have seen your question and am sorting out the answer, please wait a while, we are answering one by one, please be patient, it takes a little time to type, I am glad to serve you

Unlike computers, the design of the tablet is relatively compact, so it is not recommended to disassemble and repair the machine by yourself, and it is recommended to contact the after-sales service;

1.There are several reasons why your computer won't shut down:

1) Defects in the automatic shutdown program in the system file. Enter the command: "rundll32 ,exitwindows" in "Start Running" to see if it can shut down normally, if this command can shut down normally, it means that the automatic shutdown program has some kind of defect, if you are using a Windows98 system, check the integrity of the system files and patch the files in the "Start Program Attachments System Tools System Information Tools System File Checker".

If you use a different system (ME 2000 XP), you can also patch files in the corresponding project. If patching the file still doesn't solve the problem, you can only reinstall the system. If you run "rundll32, exitwindows" and cannot shut down normally, it may be that some system programs in the operating system are defective, but the solution is still to patch the system or reinstall the system;

2) Viruses and some defective applications or system tasks may cause shutdown failure. Check for viruses and close all applications before shutting down. Because some applications are loaded at system startup, you can use the command in the Startup menu (in Start Running:

msconfig"), in order to see if there are any files that affect the shutdown (of course, they will not take effect until they are restarted);

3) Peripherals and drivers are not compatible well and cannot respond to rapid shutdown. You can enter the command "msconfig" in Start Running, select "Advanced" in the "General" tab, and "Disable Rapid Shutdown" in the window that opens.

If you suspect that the peripherals are faulty, you can also uninstall the peripherals one by one to check them so that you can find the affected peripherals.

2.If the computer is stuck and cannot be shut down, you can press and hold the power button to force it to shut down.