What is the difference between the thermal insulation of broken bridge aluminum door and window prof

Normally, if the thermal insulation of the broken bridge aluminum door and window profile is different, it is different in that its insulation material is different, and its material is different, so its effect is also different.

Compared with aluminum alloy doors and windows, the broken bridge aluminum doors and windows are replaced by rubber strips because the profile partition is replaced by rubber strips, so the heat conduction has been alleviated to a certain extent, and the thermal insulation performance depends on the sealing strips.

In order to ensure that the technical requirements of external doors and windows are clear in the design, procurement and construction, to meet the performance requirements of wind pressure, water tightness, air tightness, heat preservation, sound insulation, lighting, safety, etc., and to avoid the problem of external doors and windows, the key points of the thermal insulation requirements of broken bridge aluminum doors and windows are shared.

1.Cavity design of profile: The profile should adopt a multi-cavity structure to reduce heat loss, and at the same time, the outer window insulation components should be coplanar up and down to form an overall insulation surface, eliminate the cold bridge, and block the heat loss channel.

2.Heat insulation strips should be installed in the glass installation groove: increase the number of air chambers, reduce the heat loss between the insulating glass and the profile, and improve the thermal insulation effect of the whole window.

3.The window sash should be designed with a T-shaped thermal insulation strip: the window sash thermal insulation strip is designed to be T-shaped, which is overlapped with the intermediate rubber strip to realize the hot and cold partition at the junction of the sash frame. It is forbidden to put the intermediate rubber strip directly on the aluminum profile of the fan.

4.The insulation strip should be made of polyamide 66.

5.Glass warm edge strips: Warm edge strips should be set around the double-layer insulating glass cavity to block the heat dissipation channel of the glass cavity.

6.In areas with high heat transfer coefficient requirements, thermal insulation materials can be added to the profile insulation cavity according to the project positioning to meet the requirements of K value.

7.Exterior door: The outer swing door leading to the garden on the first floor of the house should be set with a threshold, and it is forbidden to set no threshold, and the bottom of the door should be closed with a brush. The double-leaf casement exterior door leading to the garden for residents on the first floor of the house should be occlusive and overlapping after closing, and it is forbidden to close the middle seam with a brush.

8.Lightweight and strong.

Aluminum alloy materials mostly take hollow thin-walled composite sections, light weight and density is only one-third of steel, the cross-section has high bending strength, and the doors and windows are very durable and not easy to deform.

9.Tightness.

Generally, sealing refers to four aspects: air tightness, water tightness, temperature insulation and sound insulation. The tightness directly affects the function of doors and windows.

10.Beautiful shape.

Aluminium alloys are available in a variety of different colors and are oxidized for a smooth surface. It can also be customized according to different needs to meet the multi-level presentation of home furnishings.

11.Good performance.

The broken bridge aluminum window has the function of thermal insulation, and the foamed heat-insulating aluminum profile is to use the heat-insulating strip to connect and embed the inner and outer layers of aluminum profiles into one, and fill the heat-insulating cavity with polyurethane foam to become a heat-insulating aluminum alloy profile"Cold bridges"to achieve the effect of heat preservation and energy saving.

The protruding advantages of thermal insulation aluminum doors and windows are high strength, good thermal insulation, good rigidity, good fire resistance, large lighting area, good atmospheric erosion resistance, high comprehensive function, long service life, good decorative effect, and the use of high-grade broken bridge insulation profile aluminum alloy doors and windows, which is the preferred product for high-end building windows.

This profile adopts the double-piercing process, which isolates the inside and outside of the aluminum window frame with reinforced nylon to isolate the exchange of internal and external energy, and enhances the material and quality of the nylon partition directly affects the durability of the aluminum doors and windows of the thermal insulation bridge.

Analysis of thermal insulation performance of broken bridge aluminum doors and windows.

Foamed heat-insulating aluminum profile is to use heat-insulating strips to connect and embed the inner and outer layers of aluminum profiles into one, and fill the formed heat-insulating cavity with polyurethane foam to become heat-insulating aluminum alloy profiles"Cold bridges"to achieve the effect of heat preservation and energy saving. The protruding advantages of thermal insulation aluminum doors and windows are high strength, good thermal insulation, good rigidity, good fire resistance, large lighting area, good atmospheric erosion resistance, high comprehensive function, long service life, good decorative effect, and the use of high-grade broken bridge insulation profile aluminum alloy doors and windows, which is the preferred product for high-end building windows. This profile adopts a double-threaded process, and uses reinforced nylon to isolate the inside and outside of the aluminum window frame to prevent the exchange of internal and external energy.

The material and quality of reinforced nylon separators directly affect the durability of thermally insulated broken aluminum doors and windows.

Summary. Hello, the broken bridge insulated window is an upgraded version of the aluminum alloy window, the principle of which is to separate the aluminum alloy window profile through PVC thermal insulation strip to reduce the thermal conductivity of the aluminum alloy profile, so as to improve the thermal insulation of the window and achieve the effect of energy saving. Hope it helps.

Hello, the broken bridge insulated window is an upgraded version of the aluminum alloy window, the principle of which is to separate the aluminum alloy window profile through PVC thermal insulation strip to reduce the thermal conductivity of the aluminum alloy profile, so as to improve the thermal insulation of the window and achieve the effect of energy saving. Hope it helps.

Does kitchen cabinets do it affect in the window there?

I mean, does the cabinet deform in direct sunlight? It's at the section of the bridge window.

Yes, exposure to the sun is not good, and it needs to be ventilated and dried.