-
1.Poor water quality of central heating and equal sharing of operating costs;
2.Independent operation, slow heating speed;
3.garbage, not to mention;
4.Ground source heat pump with ** air conditioning and floor heating, the initial cost is high;
The heating rate is too fast and there is a lack of comfortable transitions;
Upgrade your product. Upgrade your product.
Similarly, where the introduction to heat transfer is slightly different;
The construction on the basis is not convenient enough compared with the former.
-
Poor floor heating maintainabilityFloor heating is a hidden project, not easy to maintain, decoration to choose pressure-resistant, temperature-resistant, corrosion-resistant, thermal stability of good high-tech environmental protection pipes. Wood flooring can be troublesome with dry cracking, so it's best to use laminate flooring, floor tiles or marble.
It is not convenient for secondary decoration because the hot pipes of ground heating are laid underground, and when the ground is renovated for secondary decoration, it is easy to damage the underground pipes. Moreover, decorations such as carpets should not be laid on the floor, otherwise it is easy to affect the heating effect. The set temperature should not be too high, otherwise it will greatly reduce the service life of the underfloor heating pipes.
-
First of all, to explain, 16 is a specification 1216 pipe, and 20 is a 1620 pipe. The latter is a bit thicker.
The water flow of the pipe of 16 is a little less, the water flow of the pipe of 20 is a little more, the water flow is large, the heat dissipation per unit area of the unit time is larger, and the heating system is just opened when the heating system is just opened.
It's over, let's add a few questions: 1: It is not recommended to turn off the floor heating halfway when the heating season is turned on, and it runs at low temperature when no one is at home, so the thickness of the pipe has nothing to do with the use effect, and the floor heating is often at a high temperature.
2: From the other side, dry floor heating will be embedded in the insulation board, the thickness of the insulation board is not enough, which affects the insulation effect, if it is an inlay method, the pipe is thicker, the thickness of the insulation board is thinner, so it is better to use a thinner pipe. Finally, I asked strangely, isn't the heat transfer mode of floor heating hot water a specific wavelength infrared, and not visible light.
The claim that it has a health care effect has not been very clear. That's all there is to say.,Hand hit.,Landlord, you give me a share.。。。 If there's still Q me that you don't understand, 9369723
-
My home is underfloor heating.
The advantages are: 1. In the same large area of the house, the house with floor heating is warmer than the house with radiators.
2. The place where people are most afraid of catching a cold is their feet, and floor heating can just warm their feet, so you don't have to worry about cold feet in winter.
The disadvantages are: 1. In case of leakage, maintenance is more troublesome. (However, fortunately, the floor heating is pressed under high pressure before use, which can detect whether it is damaged, and it is said that the quality is generally very good.) )
2. Floor heating steam the dust on the ground into the air. (Just open the window for ventilation.) )
-
The heating situation is rapidly warmed up, and the hair rises. Heat up fast. Heating is available in 30 minutes with electricity. The carbon crystal electric heating plate radiates heat directly to the room, and the temperature rises faster than the traditional one. Plumbing and hair. The hot cable is more than 5 times faster.
-
En, it's been carried out, I'm very satisfied, don't you know that all the business circles are coming? It's been half a month since this was opened, guess it's confused! Go to the warm nest more and see if you know everything!
You mean the floor heating Internet café under Warm Nest Media, but he is good, I also did it from brand promotion in **, and I am generally quite satisfied!! Support, I hope the warm nest is getting better and better!
The official ** of the warm nest authoritative China Floor Heating Network is [8dn].
The official website of China's wall-hung boiler under Warm Nest [8GL].
-
Chengdu floor heating now has a second generation of floor heating, and the Swasila HVAC company is selling the second generation of Ruhr ultra-thin and energy-saving floor heating.
It is said that the thickness is only 3 cm, and compared with traditional floor heating, it can save up to 35% of natural gas energy and costs. The impact on the floor height is relatively small, and there is no need to backfill.
-
I still think that heating cable electric floor heating and electric heating film electric floor heating are the trend of floor heating development in the future.
-
What do you do? Why do you ask this.
-
It's enough to write an a**, hehe.
-
Underfloor heating is a heating method that uses water or electricity as a heat source to dissipate heat through the ground. Compared with the traditional wall-mounted or air-conditioned heating method, floor heating has the following advantages and disadvantages:
Pros:1Uniform and comfortable: The floor heating adopts overall heat dissipation, which will not produce local temperature differences, making the indoor temperature more uniform and comfortable.
2.Space-saving: Floor heating does not require the installation of radiators or air conditioners, which can save indoor space.
3.Power saving and environmental protection: Floor heating adopts low-temperature heating, which is more energy-saving and environmentally friendly than the traditional high-temperature heating method. The sail is washed away.
4.Noiseless: Floor heating does not require the use of equipment such as fans or water pumps, so it is very quiet and noiseless.
5.Easy to clean: Floor heating will not accumulate dust, dust and other dirt like traditional wall-mounted heating, and it is easy to clean.
Cons: 1High installation cost: Compared with the traditional wall-mounted or air-conditioned heating method, the installation cost of floor heating is higher.
2.Difficult to maintain: Because the floor heating is laid underground, it is difficult to maintain. In the event of a malfunction that requires repairs, the floor may need to be removed.
3.Slow reaction time: Since floor heating adopts the overall heat dissipation method, the reaction time is slow and requires a certain amount of warm-up time.
4.Requires special materials: Special materials are required because the ground is well underground. For example, when laying pipelines, it is necessary to use pipes that are resistant to high temperature and pressure.
5.Professional construction is required: The installation of floor heating needs to be operated by professional construction personnel, otherwise the heating effect will be affected.
In short, floor heating has the advantages of uniform comfort, space saving, power saving and environmental protection, but the disadvantages of high installation cost, difficult maintenance, slow response time and other disadvantages also need to be considered. When choosing a heating method, you should weigh it according to the actual situation.
-
Underfloor heating is a widely used type of heating. Its advantages include uniform temperature, space saving, and high comfort, but at the same time, there are also disadvantages such as high temperature and high installation cost. The pros and cons are elaborated below:
First, the advantages. 1.Uniform temperature: Compared with other heating methods such as walls or radiators, the heat of floor heating can be evenly distributed indoors, and there will be no local temperature high and low.
2.High comfort: Due to the uniform distribution of heat from floor heating, the indoor temperature is stable, and there will be no discomfort such as heat waves due to shaking. At the same time, the floor heating will not produce the feeling of alternating cold and cold, making the user feel more comfortable.
3.Space-saving: Since the underfloor heating is placed under the ground, it will not occupy the wall space, making the indoor space utilization rate higher.
4.Environmental protection and energy saving: Floor heating adopts the water cycle method, relying on heat pumps and underground water sources for heating, compared with the traditional gas heating method, it can greatly reduce the consumption of resources and pollution to the environment.
Second, the shortcomings. 1.High installation cost: compared with other heating methods, the installation cost of floor heating is higher, and the ground needs to be renovated, pipe-laying, etc., under normal circumstances, the installation cost is more than 200 yuan square meters.
2.High cost of use: the use of floor heating needs to be connected to hot water, the water temperature needs to be between 50-60 degrees, because the optimal heating target area is smaller, so the frequency of water use in the process of use will be increased, of course, you need to pay more for the use of more.
3.Long installation cycle: The installation cycle of underfloor heating generally takes 10 to 20 days: because the laying of pipelines requires the transformation of the entire house, the installation cycle will also be extended.
4.Single form: underfloor heating is only suitable for underfloor heating; For many homes with other flooring materials, such as stone, granite, etc., it will be difficult to install underfloor heating.
In general, underfloor heating provides us with a more comfortable and warm living experience, but at the same time, due to its high cost and long installation period, it also brings trouble to users. Therefore, before we use floor heating, we should weigh and choose the most suitable solution according to our specific situation.
-
Healthy and comfortable: The function of floor heating is to make the indoor surface temperature more uniform, making people feel the warmth on their feet, thereby improving blood circulation and promoting metabolism. Moreover, floor heating will not pollute the air, which can keep the air fresh and clean indoors.
High efficiency and energy saving: the heat of heating is concentrated at the height of the benefit of the human body, and the loss in the process of transmission is small.
Beautify the living room: After installing floor heating, there is no need to install other radiators and various pipes in the room, and in Heyang, you can save more space to arrange other home decoration arrangements, and it is easier to clean the hygiene. Therefore, it can effectively beautify the home space.
Good thermal stability: Because the heat storage of the ground layer and the concrete layer is relatively large, the overall thermal stability of the floor heating is very good.
Long service life: The pipes for underfloor heating are buried in the ground, so the stability must be very good. It will not be easily corroded and will not be damaged by man, so it has a long service life, which also saves maintenance and replacement costs.
Disadvantages of underfloor heating:
There is an occupation of 80mm for the floor height: those who have installation experience should know that the insulation board of the floor heating is 30mm, and the filling layer of Hehanda is also 50mm, so that there is a total thickness of 80mm, relatively speaking, there will be a certain occupation of the indoor floor height.
Poor maintainability of floor heating: Floor heating is under the floor, so it is a hidden project, so it is very troublesome to maintain. Therefore, when you choose floor heating materials, it is best to choose a brand with reliable quality and reputation, which is more secure.
After all, maintenance requires damage to the ground, so the cost of Zen is not small.
Limited use of small spaces: There are defects that limit the use of small spaces, such as bathrooms. Because the heating pipes of floor heating are more complex, when laying, they need to be waterproof, and if the scope of laying is too small, the insulation effect of heating cannot be achieved.
Cleaning is more troublesome: because the floor heating pipe is relatively long, it is very troublesome to clean.
-
Floor heating is a heating method that dissipates heat through the ground, and compared with the traditional round and large radiator heating method, orange change has the following advantages and disadvantages:
Pros:1Uniform heating: Floor heating adopts the method of heat dissipation through the ground, which can make the whole room achieve more uniform heating, and avoid the uneven heat distribution caused by local heating of traditional radiators.
2.Space-saving: Floor heating does not need to be installed on the wall or floor like traditional heating, and the heating area of floor heating is larger than that of traditional heating, so it can save indoor space.
3.Energy saving: Underfloor heating can effectively reduce energy waste, because it can use underground temperature changes and indoor and outdoor temperature differences to generate convective heat, thereby reducing heat loss and reducing heating costs.
4.Environmental protection and health: Floor heating uses electricity or water as the heating medium, no smoke, no smell and no pollution, imitation residual pollution, will not produce air drying or dust and other pollution, making the indoor air more fresh.
Cons: 1High installation cost: The installation cost of floor heating is relatively high compared to the traditional heating system, because the house or floor slab needs to be renovated, which increases the difficulty and cost of installation.
2.High maintenance cost: Floor heating needs to be regularly inspected and maintained by professional personnel to ensure the use effect and maintenance cost.
3.Limited heating effect: The heating effect of floor heating is limited by the floor material, and the heating effect of floor heating will be affected on the ground with slow heat conduction such as marble and floor tiles.
4.Inflexible temperature adjustment: Floor heating is slow to adjust due to the way that it slowly rises with the ground temperature, unlike the traditional heating adjustment.
-
Underfloor heating is a system that uses radiant methods for indoor heating, and its advantages and disadvantages are as follows:
Advantages: good comfort: floor heating uses radiant heating for indoor heating, which can evenly distribute heat in the room without local temperature difference, thereby improving indoor comfort.
Aesthetics: The floor heating system is hidden under the ground rapid canopy, which does not occupy indoor space, does not affect the aesthetics of the interior, and does not produce noise and dust and other pollution.
Energy saving: The floor heating system uses low temperature heating, which does not produce air convection, thereby reducing heat loss and saving energy.
Health: The underfloor heating system does not produce air convection, which reduces the spread of pollutants such as dust and pollen in the room, thus ensuring the cleanliness of the indoor air.
Disadvantages: High installation cost: The floor heating system needs to be installed under the ground cover, and ground excavation and pipe laying are required, so the installation cost is high.
Difficult to maintain: The floor heating system is hidden under the ground, and once it fails, it is difficult to maintain, and it is necessary to carry out ground excavation and pipeline repairs.
Long reaction time: The underfloor heating system takes a certain amount of time to raise the indoor temperature to the set temperature, so it has a long reaction time, which is not suitable for occasions that need to heat up quickly in a short time.
Unable to carry out local control: The floor heating system adopts the mu then radiant heating method, which cannot be controlled locally, so it is not suitable for occasions that require local heating.
The winter in the north is very cold, and some families will install underfloor heating in addition to heating, so as to avoid stepping on the floor and feeling the chilling cold. The floor with underfloor heating will be very warm, and you can fall asleep directly by lying on the ground in winter. After one year of floor heating, there will be dirt on the inner wall of its pipes, and the thicker the dirt, the more affected the heating effect of floor heating. >>>More
Myth 1: The thicker the dough, the better.
In the process of purchasing floor heating floors, some consumers blindly pursue the thicker the multi-layer parquet skin, the wider the floor, the better, and the longer the floor. In fact, the thicker the skin of the multi-layer parquet, the more pronounced the characteristics of the parquet floor. In the process of environmental change, the greater the stress generated by the skin when the floor shrinks and swells, and the chance of floor deformation and cracking increases. >>>More
Floor heating refers to the ground radiant heating, the ground radiation heating is the low temperature floor radiant heating, is not higher than 60 hot water as the heat medium, circulating in the heating pipe, heating the floor concrete layer to keep the ground temperature at about 26, through the ground in the radiation and convection conduction mode to the indoor heating mode. As early as the seventies of the last century, low-temperature floor radiant heating technology has been rapidly developed in Europe, America, South Korea, Japan and other places, after time and use of verification, low-temperature floor radiant heating saves energy, mature technology, high thermal efficiency, is a scientific, energy-saving, health care of a way of heating.
The installation process of underfloor heating is as follows:1) Before the installation of floor heating, the floor screed should be inspected. >>>More
Current geothermal cleaning methods:
The first is chemical cleaning: chemical cleaning should be said to have a good cleaning effect, but it is rarely used because it is easy to corrode and aging geothermal pipes and system components, as well as polluting emissions. >>>More