Thinkpad R60e After installing windows7, you can neither install XP nor windows7 Help??

Could it be that the MBR of the disk master boot record is lost, you can install the system with the system disc of the installation version, so that you can rewrite the MBR, and of course, you can also use the disk software in Windows PE to rewrite the boot record. However, sometimes the notebook cannot be booted with a CD, you can try to boot into the system with a USB flash drive, you must copy Windows PE to a USB flash drive in advance, it is recommended to use Windows 7 PE, this PE is very powerful.

Format the system partition with disk partition management software (such as PQ) on the boot disc before installing it.

Note: Win7 will have a 100M partition and a system partition, delete these two partitions, and then install it, it should be ready to install.

What you have to do now is to rewrite the boot sector,You now use the original XP installation disk not the ghost version,After entering, format the two partitions that installed win7 and xp at that time,Reinstall it。 After you install XP,Back up with ghost,If you want to install win7 again,Separate a partition greater than 20G,Used to install win7.You can't install two systems on the same partition.

If the above problems occur again, you can use the same backup to restore.

After repartitioning the XP system disk with Ghost. Reinstall the system. Also, in the Lenovo BIOS settings, there is a hard drive attribute to be changed to IDE. to work.

1. Put the next ghost xp on the web in a non-win 7 partition e.g. e. And after loading with the virtual optical drive, put the Chinese file in e. e//win

2 The partition where you want to put the win xp is ready, and it is best to format it with nfts.

4. Enter the computer BIO and set the U disk as the first boot. Reboot.

5. Enter the micro win PE system, the speed will be very slow, be patient, wait patiently, use the cloning tool --- you can find it in the PE system--- use the best --- to clone the E win to the D disk. There must be no Chinese name ghost that cannot be recognized.

Since Win 7 is higher than the XP version, if the dual boot menu is not built, as long as you can enter one system, you can go to the next one online"NT60 boot menu repair software"Or [Vista 2008 Win7 Boot Menu Auto Repair Tool] directly unzip, run, restart. Just for reference.

The first win7 is not mature now, it is recommended that you do not use it, if you must use it, in your current situation, there is no way to guarantee that the xp is installed in the condition that win7 is intact

Second, if you follow the advice not to win7, then find the xp installation disc of deepghost,Put it in 10 minutes and install it automatically。

Third, if you insist on installing XP while keeping Win7, that's what the second step says, first reinstall XP to C drive, and then install Win7 to D drive, because the Windows system can only be installed in order from low to high, and the level of Win7 is higher than XP. This is the only way to do a dual system.

Fourth,Restore if it's broken,Use the hard disk version of the ghost software,This software can back up the installed system,Once the system is poisoned or crashed,You can restore it to the way you backed it up,But this is not accurate,The success rate is only about 90%,And the effect after the restoration is very general,No way to be the same as a new one。

You install XP directly and normally, after installation, you will find that there is no dual boot menu when entering the system, just fix it manually.

Repair method: Run the win7 installer, select "Repair" to install, wait for the file to copy the temporary file to end, choose not to start when the first prompt is restarted, and then end the installation, and then manually delete some folders or files starting with $ in the root directory of the hard disk (they are all temporary files generated during the installation process), and the boot menu can be restored after restarting.

If you install the new version of the system first and then install the old version, the system will not automatically generate a dual boot menu, so the new version of the system will not be able to enter, as long as you manually fix the next dual boot menu.

1.If you use the Ghost version of XP, it can only be installed on the C drive, and it will overwrite the Win7 originally installed on the C drive. You can only reinstall the Win7 system to the D drive after the Ghost finishes the XP system.

2.If you use a non-Ghost version of XP, then you choose to install it in another partition when installing, and you will lose the startup items of Win7 after installation, and you need to repair the Win7 startup connection separately.

Repair method: Run the win7 installer, select "Repair" to install, wait for the file to copy the temporary file to end, choose not to start when the first prompt is restarted, and then end the installation, and then manually delete some folders or files starting with $ in the root directory of the hard disk (they are all temporary files generated during the installation process), and the boot menu can be restored after restarting.

If in doubt, welcome hi me.

It's better not to pretend. This configuration is hard work.,CPU can't work.,Memory is not enough.,At most, a 32-bit one.,Just make do with XP.,It's fast and easy to use.。 If you want to use win7, you can consider changing a notebook in the future.,I just changed an ASUS E46.,Comes with win7 to run without pressure.,The new book is easy to use.。

I didn't mean to be angry with the landlord. I didn't mean to..

It can be installed with win7 32-bit. But because the CPU is low and the hard disk is small, it feels a bit difficult to run. Remember that the system disk should be more than 20GB! However, I recommend that you install XP better.

No problem running without playing 3d games.

You can use a computer hard disk to install XP or Win7 operating system.

1.Computer CPU Pentium 4 or above, memory: between 1GB-3GB, it is recommended to choose Windows 7-32bit.

2.The computer configuration meets the requirements of more than dual-core CPU (as long as it meets the dual core) and at least 4GB or more than 4GB of memory, it is strongly recommended that the landlord choose the win7-64-bit flagship version of the system!

According to your computer configuration, you can install win7 operating system. Use the computer hard disk to install the system, you can install the win7 system, the specific operation is as follows:1.First of all, go to the ghost system base.

3.Open the unzipped folder, double-click "Hard Disk Installer", and in the window that opens, click "Install".Can.

4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.

You can install XP through a USB flash drive;

Disc Boot Disc Maker:

1) Insert the disc.

3) Click Start and wait for about 10 minutes to complete the backup.

2.Transfer some important things from the C drive in the original system to other disks first.

3.Plug in the disc, turn on the computer, and select Start from Disc. Notebooks generally have quick start options, different notebook models turn on the keyboard and press F2 or F12 and other function keys are different, it is best to check it online.

4.installation process;

After booting from the disc, the computer immediately enters the following screen, and after making a selection, go directly to the next step.

It is recommended not to fill in the password here, once you forget it is difficult to unlock, set the selection, and wait directly until the desktop comes out, this is the original desktop. The installation of the system is complete.

Mounting systems are generally not backward compatible. If you have installed an advanced operating system and want to replace it with a lower system, you need to format the system disk (the disk with win7 system) before you can clear the boot information of the original system, and then you can install the low-level system. If it doesn't work to install the XP Ghost mirror version after formatting, you can try to install the XP Pure version.

If you really want to pretend, you can try it, I helped a friend succeed.

I recommend you keep win7. Although XP has a lot of contact, if you encounter a problem, many people can solve it! But win7 will also become mainstream in the future.

The notebook configuration is high enough - 2G memory, independent display. After installing win7, the speed is very fast, and it will take 30 seconds to boot up, and the special effects can be fully turned on.

I'm used to seeing the special effects of Vista and Win7, and I'm not used to XP.

Win7 is an improvement over XP, and this does not need to be denied.

In the case of not pretending to kill soft,I think win7 is relatively safer。

2G memory is no problem, but now I have opened more than a dozen web pages, and the physical memory only accounts for 54%.

Further,Genuine win7 with a pirated XP makes it difficult for me to choose,Upgrade to the advanced version in the future,It's as handy to use。

I recommend you check this out, which operating system is best for you, good luck!

Win7 is not used if you don't need to format it directly in the installation of XP but you can't use the ghost version.

Have you ever tried the method of clearing the dual system, that is, format the system file disk, restart, automatically run the disk in the optical drive, and install win xp.

Install XP first and then Windows 7, and the order cannot be reversed.

1G memory will be very stuck.,It's not recommended to install win7.。

No, your motherboard is too old, the CPU is a very old model, even if you add the memory or something, the effect is not very obvious, it's better to buy a new host, the current host is not very expensive, and it is also cost-effective to find a familiar person in the computer city to help you assemble one.

IDEA Forum.

Think Forum.

Lenovo Community.

1G memory is not smooth to run XP, let alone win7, and your CPU is also very bad, it is single-core! You need a dual-core CPU and 4G memory to run Win7 smoothly! Your scum configuration is honest and practical.,Don't install any win7!

If you want to install it, you have to change the computer, and the laptop can't upgrade the CPU!

This must be stuck, 1G memory is too small, you can add a memory module, 2G memory module or 4G memory module!

It can be used,Win7 comes with a tablepc component,But some lite versions of win7 have streamlined this thing.,So it's better to install the disc version.。

If it doesn't work, it's a driver problem, you may have to find a suitable Windows 7 driver, and you can solve this problem after installing it correctly.

Let's take a look at the official website first.,See if there's a driver for win7.,Win7 has been out for a long time.,There's no reason not to support it.。

Direct win7 ultimate version,That's it。

First of all, you have to use ISRT to release the space of this ultrabook's own SSD,As for how to release it,This needs to use Intel's automatic ISRT software to release it,I used to do a SONY13-inch super pole,To release this space first,You can install the system in this SSD as a normal hard disk,In order to avoid trouble,Install win7 first,No matter which one you install into,Remove the other hard disk first,After installation,Remove this,Install another hard disk,Then install win xp,Anyway, install a hard disk,Before installing the system,Remove the other one,The purpose is to avoid the impact,So simply,The two systems are installed,Then install the two hard disks,Then choose which hard disk to start when starting!