-
Anonymous users2024-02-10The network card is connected to the local LAN and is displayed normally.
-
Anonymous users2024-02-09It is the connection of the network card on your computer to other devices. It's easy to understand!
-
Anonymous users2024-02-08I only know that broadband connection is good Internet access and everything else is OK
-
Anonymous users2024-02-07If you want to find and connect to a device on your local network, ask if you want to allow it, and be sure to click Don't allow.
Note: In previous iOS versions, the app could scan devices on the local network at will, so the app could easily get the names and MAC addresses of all devices in the local network. Today's iPhones can now identify specific suspects by MAC addresses.
MAC address is a kind of address to confirm the location of network equipment, each network card has a unique MAC address, plus the MAC address is also unique, the device manufacturer will allocate MAC according to a certain rule, so different LANs are unique and can be identified.
IP addresses are logic-based, flexible, hardware-free, and easy to remember. The MAC address is consistent with the hardware to a certain extent, is physical, and can identify a specific network node. Both types of addresses have their own advantages, and they can be used differently depending on the conditions.
Most ways to access the Internet are to organize hosts together through a local area network and then connect to them through devices such as switches or routers and the Internet. As a result, the question arises of how to distinguish between specific users and prevent IP address theft. Since the IP address is only a logical identifier that can be modified by anyone at will, it cannot be used to specifically identify a user.
This is not the case with MAC addresses, which are solidified in the network card. Theoretically, unless the hardware is stolen, i.e., the network card, it generally cannot be impersonated. Based on this characteristic of MAC addresses, the LAN adopts the method of identifying specific users with MAC addresses.
-
Anonymous users2024-02-06Right-click on the network in the lower-right corner of your computer's taskbar and select Open Network & Sharing Center, as shown in the following image
<> If you are connected to broadband, the network above will directly show the local connection, and the wireless network will directly show the wireless network you want to connect to.
-
Anonymous users2024-02-051. First click on the "Network" of the win7 desktop to enter the network settings, 2. Then click on the "Network and Sharing Center" at the top
3. After entering the Network and Sharing Center, we click "Change Adapter Settings" on the left side, and 4. Click "Change Adapter" settings to find the local connection.
If there is no local connection, then there is a problem with the driver, and the driver can be updated.
Use PC Manager to update the driver and you're good to go.
2. Find "Hardware Detection" in the toolbox.
4. Click "Driver Installation" in the hardware detection.
5. You can see the "installation status", if it is not installed, you can click to install it directly.
-
Anonymous users2024-02-04Network neighbor, right-click property.
-
Anonymous users2024-02-03Method to display the local connection icon in the lower right corner:
1. First, find --- online neighbor on the computer desktop --- check the network connection. (If there is no shortcut key on the desktop of the online neighbor, there is also a shortcut key on the left side of opening "My Computer".) ）
2. Click under View Network Connection, and a window like Network Connection will appear. Local connections, and broadband connections are all here. If you don't have a local connection icon in the lower-right corner of your computer, you'll want it to appear.
Right-click directly --- Local Connection --Properties. In"Once connected, an icon will be displayed in the notification area"Put a tick on the front. Make sure the icon will appear in the bottom right corner of the computer.
-
Anonymous users2024-02-02Online Neighbor - Right Click - Properties, you can see it.
-
Anonymous users2024-02-01If your system is an XP system, then select "Network Neighbors" on the desktop, right-click the mouse, pop up the menu, click Properties, and you can see "Local Connection".
Other systems are similar.
It is also possible to go directly to the computer control panel, where there is.
-
Anonymous users2024-01-31Right-click on "Online Neighbors" and you will see it.
I've tried this problem, no matter how you set it up and how to change the head, it didn't work, and then you can change it to a separate network card. >>>More
You make sure that your router is not connected to the Internet. There is also whether the security settings of the router have set up a firewall, or prohibit the access of a certain IP, etc.
Upstairs is equivalent to not saying,,, in fact, the local connection is the attribute of your computer's network card, that is to say, if your computer is connected to a network cable that can access the Internet, then the local connection in your computer will show "connected" or show "limited or no connection". I will tell you about a broadband connection. When your computer's local connection shows that it is connected, either your computer is connected to a fiber optic network cable, or your computer is connected to the cat (both modem), or your computer is connected to other network adapters (such as routers, switches, etc.), among them, if your computer is connected to the cat (the cat is dialed up to the Internet with ** line), then you need to use a broadband connection, you need to enter the network provider and password given to you in your broadband connection, and then connect, your computer can access the Internet. >>>More
It's okay, every time you boot up, you start getting the IP locally, and then you can have a broadband connection, nothing at all.
How to disable local connections at boot.
Before shutting down, open the Control Panel Network Connections, right-click on the network you are currently using (in this case, Local Connection2), and select Disable. >>>More