-
Anonymous users2024-02-11Apple4The light is always on,The opponent's chance has a great impact,Check it,Is it the camera,Or the screen; Shut down, reboot.
-
Anonymous users2024-02-10--- hope that will burn the flash, thank you.
-
Anonymous users2024-02-09The LED indicator of the mobile phone is abnormal, it is recommended that the user to:
1.Operation: Settings - Display - LED Indicator - Charging Low Battery Notification Voice Recording, select the tick as you need.
2.If the LED indicator is always on automatically, it is recommended to slide down the top curtain of the screen on the standby interface to check whether there are no notifications or missed notifications in the notification bar**.
3.If the LED indicator is still abnormal, it is recommended to try to back up your data (contacts, SMS, **, etc.) and restore it to factory settings (Settings - Reset Privacy - Personal - Factory Reset).
4.Check if your phone has the latest firmware version, and if so, update the firmware to try. Operation: Settings - (General) - About Device - System Update.
If it is invalid, the user will bring the purchase invoice, repair card and machine to the mobile phone for after-sales, and the professional after-sales engineer will help test it.
-
Anonymous users2024-02-08If you're turning on your own flashlight, don't leave it on for too long, that's fine.
If it is caused by water and causing a bright light, it is recommended to take it for repair immediately, because it is already broken.
-
Anonymous users2024-02-07Except for wasting a little bit of current, there is no effect.
-
Anonymous users2024-02-06Is it always on when not in use? If so, the phone will have to be repaired.
-
Anonymous users2024-02-05Isn't the battery going to be wasted?
-
Anonymous users2024-02-04Flashing lights in the back? It is easy to burn.
-
Anonymous users2024-02-031. Whether it is caused by the instability of the system caused by jailbreaking, you need to brush the machine spring Zen device.
Second, whether it has been knocked or dropped to the ground, you need to check whether the hardware is damaged.
Third, the relatively rare cleaning of the dust is that the SIM card is not installed properly, resulting in a short circuit causing the flash to be always on, you need to remove the SIM card to try, if necessary, you need to re-cut the card, or even change a new SIM card.
Fourth, the setting is incorrect. In Settings > General > Accessibility Functions - > LED flashes to alert, turn off and you're good to go.
If it can't be solved, you need to go to after-sales maintenance and testing, and consider whether it can be replaced with a new machine.
-
Anonymous users2024-02-02If you don't have a warranty, it is recommended to send it to after-sales maintenance, if it is not covered by the warranty, it will be replaced for free.
-
Anonymous users2024-02-01That's not a flash, it's a breathing light, and you just go to the settings and turn it off.
If it's not a breathing light, it's probably a flashing light :
1. The light behind the mobile phone is always on, which is the flash of the mobile phone, and it may be that the flashlight of the mobile phone has been turned on inadvertently, and it can be turned off through the control center.
2. The mobile phone flashlight is to use a function key in the mobile phone to turn on the LED light-emitting diode behind the mobile phone, so that it is in a luminous state for a long time. Since the iPhone does not have a special flashlight, the flash for taking pictures is turned on with software to make it shine continuously. The mobile phone flashlight is only used for emergency and cannot be turned on for a long time, it consumes a lot of power when it is turned on, and the mobile phone will heat up quickly.
3. The specific way to turn off is to slide the phone up on the desktop and click the flashlight icon in the control center to turn it off.
Specific operation: You can take the mobile phone to a bright place and lift the mobile phone, so that the eyes are less than 30 degrees angle with the mobile phone screen, and observe whether the mobile phone screen can vaguely see the content displayed on the mobile phone screen, if you can see it, it means that the backlight driver module on your mobile phone motherboard is faulty, and the display backlight boost module on the motherboard needs to be replaced. If you can't see anything, it is very likely that the display LCD is damaged and the screen assembly needs to be replaced.
-
Anonymous users2024-01-311. The LED light of the mobile phone is always on, it may be a mistake to turn on the flashlight of the mobile phone, and turn it off.
2. The specific method is to open the main page of the mobile phone, swipe up on the home page, and click the flashlight icon to turn off the flashlight.
-
Anonymous users2024-01-301. Whether the system is unstable caused by jailbreaking, you need to brush the machine;
2. Whether it has been knocked or dropped to the ground, it is necessary to check whether the hardware is damaged;
3. It is relatively rare that the SIM card is not installed properly, resulting in a short circuit causing the flash to be always on, you need to remove the SIM card to try, if necessary, you need to re-cut the card, or even change to a new SIM card;
4. The setting is incorrect. In Settings -> General > Accessibility -> LED Reminder, turn it off and you're good to go.
If not, the hardware of the mobile phone is faulty, and you can go to the after-sales service or mobile phone store for repair.
The mobile phone has a built-in intelligent temperature control function, which will intelligently adjust the power consumption and reduce heat generation according to the operating status. Slight heating will not affect the daily use of the phone, but the following conditions may occur if the temperature is high for a long time. >>>More
Hello! Please ask which model you are referring to, please describe it in detail, according to your description, it is recommended that you restart the phone to try, and then charge the phone for 20 minutes to try, if it still doesn't work, it is recommended that you try the phone Shuangqing, Shuangqing will lose data, the phone is turned off and press and hold the volume up button and the power button for 3 to 4 seconds After the phone appears vivo phone logo, let go of the button to enter recovery mode, first select Wipe Data Factory ResetAfter completing the waiting interface, select Wipe Cache Partition, and then select Reboot System Now to restart the phone immediately.
1. Whether the system is unstable caused by jailbreaking, you need to brush the machine. >>>More
Generally speaking, since we have broken up with our ex, it is a disservice to the existing to continue to keep in touch at this time, so for usIf you still maintain unnecessary contact with your ex, you will add invisible troubles to yourself, and you will feel aggrieved now, you should cut off contact in the morning, and you should not maintain unnecessary communication, in general, it is also because of the following reasons. <> >>>More
It is most convenient to find a maintenance person, when the line is dropped, the light flashes, there is a problem with the line, or the cat is bad. If the PC light does not turn on, the network card may be defective, or there may be a problem with the network cable connected to the network card. Usually, the link indicator flashes rhythmically, indicating that the data is not synchronized and is trying to be synchronized, in this case, the line is often faulty. >>>More