High score! The master of restoring the Rubik s Cube, please enter!

Let's talk about the simpler way (though not the most effective):

It's the same kind of situation:

1, put the correct corner block in the lower left corner of the top surface;

There will always be 2 top color blocks on the same side. Then 2 will face the edge forward; 3. If you want to face the left.

Then repeat the same formula uru each time'rurru'For 4 examples, place 2 of the 3 opposite blocks facing the left and right sides, and the other facing the front.

If it should be reversed counterclockwise, use the formula f2u'mu2m'u'If f2 should be reduced clockwise, use the formula f2umu2m'uf2

Going to the Rubik's Cube Station for an afternoon!!

You choose one yourself, and it feels like the first one is easy and convenient.

I'll break it down and teach it to you carefully.

Magic generally adopts the "layer first method", that is, the Rubik's Cube is regarded as the top, middle and bottom three layers, and is restored layer by layer.

The basic steps are: the top layer of the cross block is aligned with the side center block the top layer is restored the middle layer is restored to the bottom layer The cross block is aligned with the side center block The bottom layer is the same color Adjust the bottom layer corner block Complete restoration.

The Rubik's Cube restoration method requires a lot of ** and text descriptions.

It is impossible to describe it clearly.

I have a tutorial on how to solve the Rubik's Cube.

There are formulas, instructions, and detailed explanations for each step.

I hope the above is helpful to you.

The only article in my library (layer-first method).

There are also seven-step methods, CFOPs, bridge methods, and so on.

It's complicated, the text is not clear, it is recommended to go to the Internet to see the picture. Like you should practice beginner first. After the speed is raised, go to learn the CFOP advanced recovery method.

The method of restoring the 6 sides of the Rubik's cube.

First, first define the specification of the positive (clockwise) and negative (counterclockwise) direction of each face, and each face is looking at it when it is facing itself, clockwise is positive, and counterclockwise is negative.

It is divided into F (front), B (back), U (top), D (bottom), R (right), and L (left).

Second, restore the six sides.

a) Restore the first layer. There is no formula here, figure it out yourself, but be careful, first edges and then corners.

b) Restore the second layer. There are only two formulas used here. It is divided into two cases.

1. Adjust the top edge of your face to the right edge of the side facing you. In this case, use u r u' r' u' f' u f

2. Adjust the upper edge of your right hand to the right edge of your face. In this case, use r'u' r' u' r' u r u r.

3) Restore the third layer.

1. Draw the word "ten". At this time, there are many situations, the most common is the appearance of a "small L", that is, only three blocks are the right color, and these three form a "small L". At this point, align the right angle of the "little l" at your right palm, keeping it the same, using the formula r' u'f'u f r.

This is where the "cross" appears. But sometimes there is no "small L", so you still use this formula, and you can do it a few more times.

2. Draw the word "fish".

The picture below is the so-called "fish". After the word "ten" appears, use this formula r' u' r u' r' u2'r to draw "fish", at this time, remember that when there are two colors on the side of the cross and the top cross on both sides, aim the second side at yourself, and then use the above formula. 00

3. Fight the top surface. At this point, we have already drawn "but we also need to distinguish between the left and right fish".

Aim the head of the fish at yourself and see that the color of the side of the corner of the head matches the color of the top surface. If it is on the left, use l'u' lu' l' u'u' l. Use it if it's on the right.

r ur’ uruur’。At this point, the top surface is put together.

4. Spell the four corners of the top surface. There are two scenarios. There are two corners on the sides that are the same color, and you only need to use the following formula once to put the corners together. r b’rf’f’r’brf’f’rr。

But sometimes it doesn't, so I use this formula twice. At this point, the corners will be put together.

5. Spell four edges. At this time, there are two more cases. If you have one side as the back, you will have two colors (corners) aligned with you, but when you want to see that the edge you want to find on the side of the Rubik's Cube is on the right, you can restore the six sides of the Rubik's Cube with the following formula rur'uruur'.

If it is not there, but on the left, then this formula is still used at this time, but "fish" will appear, and then the top surface will be put together with the formula of "fish", and the six sides can be restored.

The Rubik's Cube station has an introductory tutorial, which is easy to learn.