What is the international standard number to which C36000 belongs

C36000 belongs to the American standard lead brass, the implementation standard: ASTM B16 B16M-2015

C36000 lead brass has excellent cutting performance and high friction reduction performance, and is used for clock structural parts and automobile tractor parts. It is a lead according to the American ASTM standard defined in brass. It is used in watch parts, automobiles, tractors and general machine parts.

Lead brass has excellent cutting performance and high friction reduction performance, and is used for clock structural parts and automobile tractor parts.

C36000 lead brass is extremely important, widely used in a complex brass, it has excellent cutting performance, wear resistance and high strength, mainly used in mechanical engineering in a variety of connectors, valves, stem bearings to maintain, of which hot forging valve blanks, lock industry, watch industry is the three important markets, low cost of lead brass is an important premise for its wide application, its alloy composition can contain a variety of alloying elements, and the content requirements are relatively loose, and laid the foundation for the comprehensive utilization of copper alloy raw materials.

The chemical composition of C36000 is shown in the figure below

C36000 belongs to the United States, the domestic brand is HPB63-3, the German brand is CUZN36PB3, the EU brand is CUZN36PB3, the CW603N international grade is CUZN36PB3, and the Japanese brand is C3601

American Standard. There are many grades, and most of the brands in different countries have a one-to-one correspondence, and there are also one-to-many, depending on the differences in national standards.

C36000 brass alloy composition: copper; Lead; Iron and the rest are zinc.

C36000 is an American easy-cut copper grade and the standard is ASTM B16 B16M-2010

There is no corresponding standard in our country. The corresponding materials are HPB63-3 and lead brass 63-3, but the iron content is only lower than that of the American standard.

CUZN36PB3 German Lead Brass Grade EN12169:1998

This material is a German standard copper material (CW603N is a European standard).

Correspondence: Germany.

Chinese HPB63-3

US C36000

CUZN36PB3 German lead brass, CUZN39PB3 is a kind of lead brass, the code is CW614N, which is equivalent to HPB59-3 of the national standard GB, American ASTM CDA C36000 CDA360, Japan JIS C3604

CUZN39PB3 has excellent cutting and drilling performance, high strength, good plasticity and strong corrosion resistance. It is suitable for automatic lathes and CNC lathes to process products with ecological and environmental protection and health and safety requirements, such as electronics, telecommunications, electrical connectors, connectors, hardware, photography, home appliances, and drinking water engineering parts.

CUZN36PB3 belongs to the German standard lead brass, the implementation standard: DIN 17660-1983

CUZN36PB3 lead brass with high lead content, can not be processed in a hot state, has excellent machinability, and has high wear reduction performance, suitable for automatic lathes, CNC lathes to process products with ecological environmental protection and health and safety requirements, such as electronics, telecommunications, electrical connectors, connectors, hardware, photography, home appliances, drinking water engineering parts.

The chemical composition of CUZn36PB3 is shown in the following figure:

C36000 brass alloy composition: copper; Lead; Iron and the rest are zinc.

C36000 is an American easy-cut copper grade and the standard is ASTM B16 B16M-2010

There is no corresponding standard in our country. The corresponding materials are HPB63-3 and lead brass 63-3, but the iron content is only lower than that of the American standard.

Since the beginning of the RoHS standard, various industries have opened the requirements of "environmental protection" awareness. In 2016, Shanghai Tongxiang Metal Materials began to sell low-lead and low-cadmium environmentally friendly copper products that meet the environmental protection needs of RoHS.

In response to RoHS exclusionary clauses (lead content < 40,000ppm, cadmium <100ppm), Shanghai Tongxiang Metal Materials specializes in wholesale low-cadmium products that meet the requirements (JIS C3501 C3604, ASTM C35300, C36000, etc.). In view of the requirements of lead-free environmental protection, the C6802 low-lead and low-cadmium environmentally friendly copper rod distributed by Shanghai Tongxiang Metal Materials can fully comply with the requirements of harmful substances (lead<100ppm cadmium, chromium and mercury are all <10ppm), and comply with JIS C6801 specifications.

For the above two types of products, when leaving the warehouse, attach the SGS inspection report according to the purchase batch to ensure the content of each hazardous substance. Whether it is RoHS exclusionary clauses or lead-free requirements, Shanghai Tongxiang metal material products will provide customers with the best choice.

The equivalent of China's HPB60-2 also has such a counterpart.

hpb60-2 c37700

hpb62-3 c36000

The tensile strength is about 400N mm2.

Resources.

UNS is an abbreviation for "Unified Numbering System".

It is a convenient numbering system designed by the Society of Motor Vehicle Engineers (SAE) and the American Society for Testing and Materials (ASTM) in 1967 to replace or at least supplement the product grade system of current standards. The numbering system is now documented in SAE and ASTM standards. The SAE standard number is J1086, the ASTM standard number is E527, and the name is "Recommended Method for Metals and Alloys Numbering (UNS[1]).

The numbering method of the UNS numbering system consists of one letter and five digits.

The UNS system is divided into 18 categories, as shown in the table below.

Non-ferrous metals and alloys Ferrous metals and alloys.

A00001 A99999 Aluminium and aluminum alloy.

C00001 C99999 Copper and Copper Alloys.

E00001 E99999 Rare Earth and Rare Earth Alloys.

Subdivided into 18 sub-categories).

L00001 L99999 Low melting point metals and alloys.

Subdivided into 14 subcategories).

m00001 m99999 Other non-ferrous metals and alloys.

Subdivided into 12 sub-categories).

N00001 N99999 Nickel and nickel alloys.

P00001 P99999 Precision Metals and Alloys.

Subdivided into 8 sub-categories).

R00001 R99999 Reactive and Heat-Resistant Metals and Alloys Z00001 Z99999 Zinc and Zinc Alloys.

D00001 D99999 Specifying the mechanical properties of steel.

F00001 F99999 Grey Cast Iron, Malleable Cast Iron, Pearlite Malleable Cast Iron, Ductile Iron.

G00001 G99999 AISI and SAE Carbon Steel and Alloy Steel.

except for tool steel).

H00001 H99999 AISI H-STEEL.()

J00001 J99999 Cast steel (except tool steel).

K00001 K99999 Other steel and ferrous alloys.

S00001 S99999 Heat-resistant steel and corrosion-resistant (stainless steel) steel.

T00001 T99999 Tool Steel.

W00001 W99999 Metal solder, coating electrode and tubular electrode.

Grade HPB62-3

China ISC C36000

Corresponding to GB T 5231-2012 Processed copper and copper alloy grades and chemical composition.

Performance Ease of machinability.

Description The cutting performance is excellent and has high friction reduction performance. It is used for watch structure parts and automobile tractor parts. Tensile Strength b (MPa): 390

C36000 belongs to the American standard free-cutting brass, the implementation standard: ASTM B16M-2005, the density of C36000 is.

The chemical composition of C36000 is shown in the figure below

H59 brass is the national standard.

C36000 Lead Brass is an American ASTM standard.

Main differences: Composition: C36000 lead brass has 1% more PB content than H59 brass Performance: C36000 has higher mechanical properties.

C3600 is a Japanese JIS standard free-cutting brass grade.

C36000 belongs to the American standard free-cutting lead brass, the executive standard: ASTM B16 16M-2015; As shown below:

The chemical composition of C36000 is shown in the figure below