I think the computer has been reinstalled, and there are some problems. 30

Updated on number 2024-05-23
18 answers
  1. Anonymous users2024-02-11

    First make sure that there are no important files in the D drive E disk, if there are any, back up first, and then format the entire hard disk. In terms of fixing vulnerabilities, everything except the confirmed copy of Windows can be fixed.

    At present, the more commonly used anti-virus software Kaba, Rising, Kingsoft Antivirus, etc., Kaba antivirus speed is slower, Rising antivirus speed is fast, but the memory occupation is slightly higher, as for Kingsoft Antivirus, there is really nothing to say, I will not consider it.

    Software optimizers who organize files, super rabbits are good.

  2. Anonymous users2024-02-10

    It's completely possible to "reload" the D and E drives, but it's best to clean and organize them manually, and if you format them too, everything will be gone.

    360 Security Guard says that vulnerabilities need to be fixed and can be dismissed.

    As for antivirus software, it's hard to say who is good and who is bad, it mainly depends on personal preference, I use nod32

  3. Anonymous users2024-02-09

    In the case of yours, format the D and E disks first and then reinstall the system on the C disk, 360 Security Guard said that the system vulnerabilities must be fixed, otherwise some hackers will use these vulnerabilities to attack your computer to make trouble. Do you know about the door? Those ** were stolen by hackers because of system vulnerabilities Hehe!

    Kaspersky is the best antivirus! Very good and powerful!

  4. Anonymous users2024-02-08

    You can reinstall it on the C drive, and then start it with the C drive's system, and delete the system of the de drive after entering, leaving your original things.

    It's better to fill the loopholes.

    If you tidy it up, just use the optimization master!!

  5. Anonymous users2024-02-07

    Now, the contents of the E and D disks are messed up, and I want to reinstall these two disks now? May I?

    Do you want to install 3 systems? That's amazing.

    As for the 360 degrees you said. Personally, I don't think there is a need to fix it.

    This nerve, ignore him.

    Are you upstairs amazing?

  6. Anonymous users2024-02-06

    The system is generally installed under the C drive E and D arrangement. As for the 360 degrees you said. Personally, I don't think there is a need to fix it.

  7. Anonymous users2024-02-05

    The landlord is a rookie! I can't communicate with you.

  8. Anonymous users2024-02-04

    Of course, you have to buy a disc!

    1. Press the DEL button or F2 to enter the BIOS settings when booting up, and set the computer's boot mode to boot from the CD. That is, booting from a CDROM, depending on the motherboard, the BIOS settings are different (1STSboot CDROM).

    2. Start the machine, insert the installation disc of the XP, wait for the disc boot to appear, when "Press any key to boot from cd..." appears, press any key to boot:

    3. At this time, the installer of XP will run automatically

    Wait until the following screen appears, press Enter:

    Then agree to the agreement and press F8:

    Enter the size you want to divide it into, and press enter to confirm

    Then go back to the previous menu, press enter, and install XP on the partition of your choice.

    Then format the hard disk partition, it is recommended to NTFS partition, of course, if you do not have very high requirements for the security factor of the system, and for the convenience of the future, you can also choose the FAT file format, so that you can also. Opt for Quick Format, of course.

    XP Installer Starts Formatting Hard Drive:

    After that, XP will copy and install the files you need, and you can have a cup of tea and wait.

    Until the following interface appears, the copy is completed, wait for the restart, you can press enter, and the waiting time of 15 seconds will be passed.

    After the restart, we will enter the second round of installation, at which point we don't have to do anything but wait.

    At this time, the Windows installer is detecting your hardware configuration and installing it.

    Install the hardware, it will enter our manual information collection, select the region and text support, here is to pay attention to one point, that is, windows is a multi-language supported operating system, in the language options, we have to choose additional language support, otherwise, playing Chinese traditional Chinese games will appear garbled.

    Of course, in order to further enhance text compatibility, we can install language support for non-Unicode programs in all advanced areas. It is recommended to select all.

    Then, enter the serial number, this site provides a number calculator by XP, here is the installation of the VLK version, and the serial number of the VLK version is calculated.

    Customize the computer name, and system administrator password, if you just use the computer yourself, you can not set a password. This makes it easier for Windows to log in automatically.

    Set your time zone, which is said to be untouchable, unless you're using the English version of XP, you'll need to select Zone 8 East.

    Network settings, if you use ADSL to surf the Internet at home, you can not fill in the IP address, which is the typical setting.

    If you are connecting the Internet through a LAN, you need to customize the IP and DNS, and install the SPX IPX protocol.

    Click this next step, and you'll be able to finish the installation with a cup of tea and staring at XP by itself.

  9. Anonymous users2024-02-03

    Trouble! So be it! Buy a disc of the XP SP2 that is automatically cloned. Everything is automatic. Once installed, it's ready to use. Convenient. If you want to put it yourself.

    Put the disc of the XP in it. Wait for the installation interface. Then follow the steps to come. It is generally a Chinese interface. Don't worry about making mistakes. As for the basic tools, SP2 will come with it.

  10. Anonymous users2024-02-02

    1. Fully automatic installation of pigs, pigs and cats. CN computer city installed version. It is basically fully automatic and does not require much manual involvement.

    2. Reboot to the DOS installation system. If you know how to use DOS, you can select it, manually install the system 3, and the power mode is automatically modified. Modify the power mode, if you know your power mode, choose it 4, backup and restore the driver.

    It is to back up or restore your computer's hardware drivers5, one-click recovery of the hard disk version. This is to use ghost software, and use the hard disk image file made by ghost to install the system.

    6. Browse the CD. Click on it to see the table of contents of this disc, is there anything else unclear?

  11. Anonymous users2024-02-01

    Select 1 and follow the prompts.

  12. Anonymous users2024-01-31

    If you choose one, the system automatically installs the system on the main disk (usually C:), and there is no prompt in the middle if you have something on C: ... None of them are gone.

    If you choose two to run ghost, select from image in partition

    Be careful not to select the wrong hard drive partition and ghost

    3456 You don't have to worry about it for the time being.

  13. Anonymous users2024-01-30

    Choose 1, the landlord is so mighty, so handsome, give it to me.

  14. Anonymous users2024-01-29

    If you install it, just choose 1, no problem.

    1 The installation of the ghost version is fully automatic with 1.

    2 is DOS installed system, provided that you have to use DOS back (to play commands, not recommended).

    3 Modify the power mode, not install the system, if you will use it, or if necessary, use it to debug the power mode.

    4 This is to back up or restore your computer's hardware drivers for installation configuration, if you think your original system is installed better, it is useful to back it up.

    5 This is using ghost software, using the hard disk image file made by ghost to install the system It is better to use the first one to re-press the whole whole.

    6 It's to look at the specific content of the CD, and it has nothing to do with the installation.

    And check out the latest automatic system installation software, which is very easy to use.

  15. Anonymous users2024-01-28

    Just pick 1.

    Or select 2 to enter DOS and run Ghost Restore.

  16. Anonymous users2024-01-27

    Just choose one and follow the prompts.

  17. Anonymous users2024-01-26

    You should talk about the problem, you may be saying that it is a system problem.

  18. Anonymous users2024-01-25

    Something went wrong. I hope you can make it clear. If not, it's hard to get the right solution.

    If it is a system disk issue. You can consider changing the plate. If not, it's probably the drive or something.

    Not very pre-faceted. In this case, you can change the driver.

Related questions
9 answers2024-05-23

There is no such display as "Runjing", I guess you are talking about "Runjing LCD display", right? In fact, this "moisturizing eyes" is just a gimmick of merchants. The radiation of the LCD itself is lower than the CRT display, there are thousands of LCD display models of various prices and grades on the market, and the price of 2000 yuan is mostly the low-end 22-inch or high-end 19-inch products of the mainstream brand, and the specific choice of what brand and what model depends on your economic affordability and specific needs. >>>More

15 answers2024-05-23

CPU AMD Athlon II X3 445 1 460 Motherboard Spartak Kuroshio BA-218 1 499 RAM Kingston 2GB DDR3 1333 140 HDD Hitachi 1TB 7200 rpm 32MB (HDS72 365 Graphics Card Onda HD5750 512MB Shengo 1234 599LCD AOC 936SW+ 1 699 Chassis Big Buffalo A0707 (empty box) 1 99Power Antec VP450P 1 339

15 answers2024-05-23

The system installation generally defaults to the C disk,D disk as long as the data inside is not formatted, it is still retained,Of course, it is best to back up the data with a USB flash drive before reinstallation。

11 answers2024-05-23

Wow, that's complicated, huh

Get a basin or something, make a box for them to hide. If you have the conditions to get some small fish in the pot, you want to live. Then try to disturb them as little as possible. >>>More

11 answers2024-05-23

Teach you a very classic way to use the computer correctly and prevent computer poisoning and all kinds of abnormal conditions! >>>More