About wifi mobile phone signal, how to connect the mobile phone to wifi signal?

Under normal circumstances, the range of home router can be used is about 10 meters, and if there is a wall lamp cover, the distance will be appropriately shortened. If you feel that the distance you can use is short, you can refer to the following solutions according to your own situation:

1.Try not to go farther than the wifi transmitter and router;

2.It is recommended that you check whether there are too many devices connected at the same time, resulting in poor signal;

3.If possible, please change the wireless network (other router equipment) for comparison, and do not rule out compatibility and other problems;

4.If it is a recent problem, it is recommended that you go to the main menu - System Settings - Backup & Reset to back up the body data to perform a factory reset operation (password is 1234).

If the above operations cannot be improved, it may be caused by abnormal system files or data loss on the device motherboard, and you need to flash and check the device. Because there is a risk in flashing and may lead to non-insurance, it is not recommended that you deal with it yourself, if you have strong hands-on ability, have experience in flashing, want to self-help flashing, and are willing to take possible risks. Personally, I suggest that you can go to Lenovo's official Lewen Firmware Zone**The official firmware operation of your device.

Please operate with care and ensure that the battery is fully charged before operation.

If you really can't complete it by yourself, we recommend that you go to the Lenovo repair station to flash the machine for processing.

Mobile phone hardware problems, brushing any system is the same.

1. First connect the WAN interface of the router, and then you need to connect the mobile phone to the WiFi signal of the router, as shown in the figure below.

2. Open the browser in the mobile phone, enter it in the browser, and you can open the excitation management page, and then set an "administrator password" according to the page prompts, as shown in the figure below.

3. At this time, the router will generally automatically detect the "Internet mode", and only need to set it accordingly according to the detection results. If it is detected that the "Internet access mode" is: broadband dial-up Internet access, then you need to fill in your home's "broadband" and "broadband password" below, as shown in the figure below.

4. Set the wifi name and wifi password of the router after setting the way to access the Internet, as shown in the figure below.

5. Click OK to complete the setting, some routers may need to manually click the "Done" button.

Set up > Wi-Fi and turn on the Waln switch, the system will list the detected Wi-Fi networks in the form of a list, click the Wi-Fi network you want to connect to. If you select an encrypted network, you will need to enter the access password to connect.

Note friend sensational matters:

1. If the wireless network rental icon appears at the top of the screen, it means that the mobile phone has been connected to the wireless network;

2. Once the device is successfully connected to the current WLAN network, the device will automatically connect whenever the network is available, and there is no need to enter a new password for the heavy car. If you don't want to automatically connect to Wi-Fi, you can also click the icon to the right of your connected Wi-Fi and select Remove the network. You can view and manage your saved networks in the advanced settings.

1. Open SettingsOpen your phone's Settings app, which can be opened in a variety of ways.

2. Enter wifiOpen the settings interface as shown in the figure below, click the "WiFi" option, and open the detailed WiFi settings interface.

3. Turn on WiFiAt this time, the wifi option has not been turned on, click the rear button to turn on the smartphone wifi function.

4. Scan the connection