What is the best floor for underfloor heating? I absolutely laminate flooring and parquet.

If there is a condition, solid wood will be used, but not every solid wood brand can be laid under geothermal conditions, if it is not possible, use a strengthened one, and the multi-layer composite glue is exposed to the outside, which is more volatile when heated. It is good to choose products that meet the quality standards.

Multi-layer parquet must be the first choice for floor heating, laminate flooring is easy to deform after heating, and formaldehyde release is also exceeded, from the perspective of physics and environmental protection, solid wood composite is the most suitable.

The underfloor heating system achieves the purpose of heating by heating the floor, and the floor is always kept at a high temperature, and ordinary floors are prone to deformation in such an environment. Therefore, after installing the underfloor heating system, it is important to choose a floor that is suitable for the underfloor heating system. According to the working characteristics of floor heating, the floor heating floor should meet three conditions:

1.Adapt to repeated changes of cold and heat, and the amount of deformation is small; 2.Good for heat conduction; 3.

Moisture and water resistant. Since wood is a poor conductor, the thicker it is, the less favorable it is for heat conduction. At present, the vast majority of floors on the market, such as 12-18mm thick solid wood flooring, bamboo flooring, ordinary solid wood parquet and laminate flooring with a thickness of more than 8mm, are not suitable for ground heating radiation system, otherwise it will affect heat conduction or cause floor deformation. In the same environment, the deformation rate of solid wood flooring is the largest, followed by laminate flooring, and the deformation of solid wood parquet is the smallest, because its substrate is staggered horizontally and vertically between each layer, and each other is contained; There are also dense anti-deformation grooves on the back that break down the stresses generated by the heating surface.

It is best to lay pure floor boards on the floor, which is more environmentally friendly, and I lay solid wood floor heating floors at home.

Multi-layer hardwood flooring, in which oak and dry croton wood are not suitable for underfloor heating!

Nowadays, most of them are used for floor heating, and the floor materials on the market can be used. Commonly used floor heating includes marble, ceramic tiles, solid wood flooring, laminate flooring, etc., and the thermal conductivity of these flooring materials from large to small is: ceramic tile parquet laminate flooring laminate flooring solid wood flooring.

Multi-layer flooring, also known as multi-layer parquet, is completely available for underfloor heating and has more advantages than other types of flooring

1. The choice of geothermal floor should be decided according to the particularity of the geothermal heating method; It is suitable for repeated changes of cold and heat and is conducive to heat conduction. First, the geothermal floor should first have a small amount of deformation; Second, it should be conducive to heat conduction; 3. Moisture-resistant and waterproof.

2. In the same case, the deformation of solid wood flooring is larger than that of laminate flooring. Laminate flooring has a large amount of deformation for multi-layer parquet. The reason for the small deformation of multi-layer parquet used for geothermal heating is that its substrate is staggered horizontally and vertically between each layer, and each other is contained; There are also dense anti-deformation grooves on the back.

The stress generated by the heating surface is decomposed, so it has a small amount of deformation. The deformation of wood flooring from large to small is: solid wood flooring, laminate flooring, and solid wood parquet.

3. Multi-layer solid wood flooring, the anti-deformation groove on the back of it is conducive to air circulation and noise reduction. Thermal conductivity is superior to laminate flooring. The thermal conductivity of wood flooring materials is arranged in order from large to small: parquet "laminate flooring" solid wood flooring.

4. In winter, the indoor is dry, and the general situation will be humidified, and the moisture resistance and waterproof performance of the floor is also important. The parquet is specially treated, and the sample is soaked in water for 3-5 days without obvious deformation; Even if a large amount of water runs on the ground after installation, and the arch is soaked, as long as the doors and windows are opened and the air circulation is maintained, it will soon be restored to its original state, which solves the customer's worries that the customer cannot recover after laying other floors when encountering water. In terms of moisture resistance and water resistance, multi-layer parquet is significantly superior to other categories of flooring.

1. Laminated composite flooring: referred to as composite flooring, it is composed of wear-resistant layer (aluminum oxide film), surface layer (computer printing paper), base layer (high-density fiberboard), and balance layer (synthetic paper) by high temperature and strong pressure compounding, which has the characteristics of wear resistance and low price.

2. Hardwood parquet: It is divided into multi-layer parquet, three-layer parquet, and three-layer parquet due to high cost and poor deformation resistance, and its sales volume in the domestic market is very small. Multi-layer parquet is made of solid wood throughout, criss-crossing thin wood chips, crossing each other 90 ° vertically and then using adhesive high pressure, not easy to crack, deformation, warping, very suitable for areas with obvious changes in the four seasons, moderate, is the best choice for geothermal flooring.