What is the reason for the floor outbreak, and what is the reason for the wood floor outbreak

What about outdoor flooring? This question cannot be generalized and should be analyzed according to your specific situation. Here is a brief introduction to the characteristics of outdoor flooring for your reference.

Product features of outdoor flooring: 1. Deep carbonization of outdoor wood flooring: It is to pyrolyze the wood at high temperature to reduce the concentration of hydroxyl groups in the wood components, thereby reducing the hygroscopicity and internal stress of the wood, achieving the purpose of reducing the deformation of the wood, improving the corrosion resistance of the wood, inhibiting the growth of decaying bacteria, and achieving the purpose of weather resistance and anti-corrosion.

2. Anti-corrosion treatment of outdoor flooring: In order to maintain the original strength and beauty of the wood for a long time, it is treated with anti-corrosion and anti-ants. Under the premise of strict quality control, preservatives such as CCA, CA (cupazole), and ACQ are injected under pressure to deeply penetrate the agent, and the agent that penetrates into it can be tightly attached to the wood

The water content is too high or too low, which is similar to the principle of thermal expansion and contraction, and the main reason is that the quality of the floor is not good enough.

One is that the water content of the decoration environment is too low.

Second, it may be that the moisture content of the floor is not up to standard when it is produced.

It is advisable to turn on the humidifier at home, and dry floors are also a strong warning.

There is a lack of water in the home improvement environment.

In the case of wood, it may be that the interior is too dry, or it may be that the wood board is not fully considered in the processing of the influence of the texture, and in the case of ceramics, it may be that the quality of the glaze is problematic

There may be a quality problem.

It's possible that it's blisters.

It is possible that the installation is too tight.

1. The tongue and groove floor is relative to the flat floor, its board surface is rectangular, the whole floor is a simple piece of wood, it has tenon and groove, there is an anti-deformation groove on the back, and it overlaps each other when paving, and can be divided into percussion lock and oblique lock from the installation method, and the oblique lock is easy to install, but the ground is slightly uneven, the lock is easy to disconnect, and the lower part of the notch is easy to break.

2. The shape of the flat floor is a rectangular plate with a smooth surface and straight on all six sides. It can be spliced into square, herringbone, zigzag and other patterns according to personal preferences. Tongue and groove flooring means that the installation of the floor must rely on the glue between the tenon and the tenon groove.

The board surface is rectangular, the whole floor is a simple wood, it has tenon and groove, there is an anti-deformation groove on the back, overlap with each other when paving, from the installation method can be divided into percussion lock and oblique lock, oblique lock is easy to install, but the ground is slightly uneven, the lock is easy to disconnect, and the lower part of the notch is easy to break.

Tongue and groove floor refers to the installation of the floor must rely on the glue between the tenon and the tenon groove, and the flat floor refers to the floor with a rectangular shape, smooth on all sides and straight edges, and the production process is relatively simple.

Of course, the tongue and groove floor is good.

According to my experience, the appearance of tile-like arching after the installation of the floor is related to the moisture of the ground and the flatness of the ground. The key point is that I hope the landlord will make it clear, whether the floor is solid wood or solid wood composite or laminate flooring, how many months it was laid, how long it has been laid, which room has the floor (local problem or the overall situation), whether the landlord's house is a floor, or whether there has been a water leak at home, etc.!

It's damp. The floor is not good. The paving is not good.

The wooden floor is a normal drop, because it is solid wood, he will have a situation of heat rise and contraction, you can find a floor factory, and then get it, you can, this is not a problem.

It is a quality problem, and the manufacturer's process is not good.

The main trick is that the moisture content is not well controlled.

Tongue and groove hardwood flooring.

Ordinary tongue and groove flooring refers to the tongue and groove floor in which the installation of the floor must rely on the glue between the tenon and the tenon groove. The board surface is rectangular, the whole floor is a simple wood, it has tenon and groove, there is an anti-deformation groove on the back, overlap with each other when paving, from the installation method can be divided into percussion lock and oblique lock, oblique lock is easy to install, but the ground is slightly uneven, the lock is easy to disconnect, and the lower part of the notch is easy to break.

Locking floor refers to the special tongue and groove floor of the floor that is automatically locked and difficult to crack after the tenon and tenon groove of the floor cooperate with each other. Ordinary tongue and groove flooring refers to the tongue and groove floor in which the installation of the floor must rely on the glue between the tenon and the tenon groove. There are two main types of adhesive-free flooring on the market and non-adhesive-free adhesive locking flooring, the former has a special waterproof treatment at the floor tenon and notch, and the latter does not.

The difference between the two in installation and use There is a glue-free lock floor installation generally does not use glue, can be used immediately after installation, do not worry about the use of glue must be used after 48 hours of glue curing, otherwise it will crack, and should be moved in after the smell of glue is completely dissipated, so as not to feel uncomfortable; From the installation method can be divided into percussion type lock and oblique type lock, oblique type lock is easy to install, but the ground is slightly uneven, the lock is easy to take off, and the lower part of the notch is easy to break. Ordinary tongue and groove floors must use D3 waterproof special glue during installation, otherwise the floor will crack, but due to the uneven construction gluing at the installation site, the tenon and tenon groove of ordinary tongue and groove floors are easy to be swollen by moisture, which leads to unnecessary disputes.

The advantage of double-tongued solid wood flooring is that it does not require a floor keel, it can be assembled directly, and it can be disassembled. Due to its special way of assembly.

There is a certain gap between the slabs, and it is indeed not easy to arch. The disadvantage is that the requirements for the flatness of the ground are very high, and even when walking.

There will be a sound. Because it is connected to the nylon card pad only at the bottom, it will aggravate the wear and tear of the tongue and groove for a long time, resulting in loosening and hair on the floor.

Make a sound. Since no wooden keel is used, the possibility of being eaten by insects is relatively small.

According to your description, this is due to the insufficient flatness of the surface layer of the floor substrate, the high and uneven moisture content, the insufficient pressure of the press, and the uneven gluing of decorative paper and wear-resistant paper, the water vapor generated by the substrate during the pressing process is not completely released, the pressing is not solid, and the gas gathered in the substrate will change with the external environment. Solution: You should pay attention to the ventilation of the room in the future, try to wring out the mop when mopping, and he will slowly disappear as the weather changes, don't worry. Word by word typed out hope to adopt, I am a home decoration designer, this kind of question owners often ask me.

The arching of the floor may be due to the fact that the mop is too wet when mopping, resulting in too high moisture content of the floor, and too much water, which will arch up.

Pay attention to using a dry mop when mopping the floor in the future.

The floor has a good grip, just imagine, what if it is slippery and the elderly and children fall? Therefore, the first problem to be overcome in the floor is non-slip. Ask the floor manufacturer whether it is a quality problem or a maintenance problem.

The floor has been used for a long time, and it feels astringent. It feels slippery and rarely heard.

Maybe it's caused by oil (grease stains) on the surface of the floor.

Probably not.

。。You often ventilate and breathe. The floor of my house is very safe, and there is no such situation. 、

There is no such statement, the most likely is caused by the use of floor oil, and it will be fine after three days.