How to connect the bull four open three control four street lights

<>1 place is the incoming line live wire, the top 4 are connected with the wire, the following place is the 4 circuit live wire, each switch can control a lamp individually, can control 4 road lights, if only 3 circuits can be connected at will.

Bull four-open, three-control four-street lamp is a common circuit connection method, which can realize the independent control of four lamps. Here's a common wiring method:

First of all, we need to prepare the following materials and tools:

1.The bull opens four and controls the switch.

2.Four light fixtures.

3.Wire.

4.Screwdriver.

5.Insulating tape.

Next, follow these steps to wire:

1.Turn off the power: Always turn off the power before making any circuit connections to ensure safety.

2.Connection switch: connect the L and N terminals of the bull four-open three-control switch with the L and N wires of the power supply respectively. Use a screwdriver to tighten the terminal screws to make sure the connection is secure.

3.Connect the luminaires: Connect the live wire (usually red or brown) of each luminaire to the terminals of the switch separately. Use a screwdriver to tighten the terminal screws to make sure the connection is secure.

4.Connect the neutral wire: Connect the neutral wire (usually blue) of each luminaire with the n-wire of the power supply separately. Use a screwdriver to tighten the terminal screws to make sure the connection is secure.

5.Insulation treatment: Use insulating tape to insulate each terminal block to prevent short circuits and leakage.

6.Check the wiring: Make sure all wiring is firm and reliable, and check for loose or short circuits.

7.Power-on test: After making sure all the wiring is correct, turn on the power and test whether each switch can control the corresponding luminaire independently.

It should be noted that the above is a common wiring method, and the specific wiring method may vary depending on different electrical equipment and circuit requirements. Before wiring, it is recommended to consult the relevant electrical equipment manuals or consult a professional to ensure proper wiring and avoid potential safety hazards.

Materials required: wires, cross-shaped cones.

1. Seven binding posts on the back of the four-open switch L1, L11, L12, L2, L21, L3 and L31.

2. Use four wires to connect L1 and L2 in a group, L1 and L3 in a group, L11 and L12 in a group, and L11 and L13 in series.

3. There are five lines on the wall, the red one is the fire line, the green one is the zero line, and the other three white lines are the control line.

4. Connect the live wire to L1, connect the neutral wire to L2, and connect the 3 control wires to L11, L12 and L13 respectively, then the switch installation is completed.

Summary. Kiss, here comes the answer! As follows: First of all, the bull three open three control three light wiring method: 1, three open three open switch control three lights, usually using three open, single control, three open, double control.

The bull triple control switch controls the wiring method of the three lights.

Kiss, here comes the answer! As follows: First of all, the bull three open three control three light wiring method: 1, three open three open switch control three lights, usually using three open, single control, three open, double control.

Then say 2, three open single control switch, its wiring method depends on the number of rear end wiring holes, but its wiring mode is relatively simple. There are three types of rear terminal wiring holes: six-hole, five-hole, and four-hole.

1) Three-open single-control switch, with six terminals, usually with L1, L2, L3, . Connect to the power supply line of L1, and then use jumpers to connect L1 and L2 to connect with the lamp heads of the three lights.

Final note: 2) a three-open-one-control switch, a three-open-one-control switch with five terminals, respectively marked with . Connect the power leads to , then connect with jumpers and connect with the heads of the three lights.

3) It is best to use L, L1, L2, L3 to represent the three-open single-control switch of the four terminals. l Grounding wire. L1, L2 and L3 are connected with the lamp head wires of the three lamps.

That's it! Kiss, follow the above method for a total of three steps! It's not a big problem!

Such. Uh-huh, this situation is normal, well, you just follow the above method step by step!

Final note: 2) a three-open-one-control switch, a three-open-one-control switch with five terminals, respectively marked with . Connect the power leads to , then connect with jumpers and connect with the heads of the three lights.

3) It is best to use L, L1, L2, L3 to represent the three-open single-control switch of the four terminals. l Grounding wire. L1, L2 and L3 are connected with the lamp head wires of the three lamps.

That's it!

Wiring method of bull switch triple switch:

Turn off the power supply at home, introduce the home live wire into the L3 wiring port of the switch, and then connect the L1, L2, and L3 to the dismantling port with the live wire. Next, connect the live wires of the three electrical appliances to the L11, L21, and L31 wiring ports respectively. Finally, the neutral wires of the three electrical appliances are connected in series and connected to the neutral line port of the electrical appliances.

Three-control switch means that three switches control a lamp, that is, on the basis of dual control, add a double-pole double-throw switch in the middle of the connecting line of the two switches. If not, you can use a double open instead.

Precautions for safe electricity use:

1. Don't talk bare-handedly and barefoot to repair or move live lines or equipment at home to avoid electric shock.

2. Do not use metal to touch electricity, do not touch the power supply when your hands are wet, and do not use a wet cloth to wipe lamps, switches and other electrical appliances.

3. Install the three-prong socket correctly, and do not change the three-prong plug to a two-prong plug at will.

4. Use the power cord correctly, and do not pull or connect the wires indiscriminately.

5. Do not add electrical appliances to the original line without permission.

6. Use household appliances correctly, and do not use electrical equipment that does not meet the safety specifications.

7. Develop a good habit of unplugging the power supply of electric irons, hair dryers, electric stoves and other electrical appliances when unattended or not used for a long time.

Summary. Bull three open switch wiring** pro! Hello, I'm glad to answer for you<> pro 1, the so-called three open is that there must be three control lines and a main power line, then there are four pile heads at the pile head, respectively, l l1l2 l1l2 l1l2 you just need to put the main power line into l in series with three l1, and then the three control lines into l2 on the line.

In this kind of switch, the three terminals are a group, and one of the three terminals is a common point. The remaining two are normally open and normally closed. The common disconnect live wire, normally closed termination of the root wire, connected to the lamp, and the other one is connected to the neutral wire.

2. Bull three-open switch wiring method: 1. Connect the indoor line 1, mark the letter n below to connect the zero line zero line (blue), and all indoor zero lines are connected here. 2. Connect the live wire of the lighting wire (electric lamp) at the lower A1.

3. Connect the live wire branch of the socket wire at A2 below. 4. Connect the live wire branch of the air conditioning line at A3 below. 2. Connect the incoming wire (the wire coming in from the outside) 1. Connect the zero line (blue) at the top n.

2. Connect the fire wire (red) at the top l. Extended material: I hope mine can help you <>

Do you have any other questions?

Bull three-open switch wiring**.

Bull three open switch wiring** pro! Hello, I'm glad to answer for you<> pro 1, the so-called three silver Huikai is that there must be three control lines and a main power line, then there are four pile heads at the pile head, respectively, L l1l2 l1l2 l1l2 You just need to put the main power line into L and three L1 in series, and then the three control lines into L2 respectively. In this kind of switch, the three terminals are a group, and one of the three terminals is a common point.

The remaining two are normally open and normally closed. The common disconnect live wire, normally closed termination of the root wire, connected to the lamp, and the other one is connected to the neutral wire. 2. Wiring method of bull three-open switch:

1. Connecting the inner line of the car 1, marked with the letter n below to connect the zero line to the zero line (blue), all the indoor zero line is connected here. 2. Connect the live wire of the lighting wire (electric lamp) at the lower A1. 3. Connect the live wire branch of the socket wire at A2 below.

4. Connect the live wire branch of the air conditioning line at A3 below. 2. Connect the incoming wire (the wire coming in from the outside) 1. Connect the zero line (blue) at the top n. 2. Connect the fire wire (red) at the top l.

Expand Zifengfan replied that I hope mine can help you <>

Do you have any other questions?

The two common points, that is, the two points connected by the red line, are the common points. Find a common point power source (i.e., phase wire) and adjust the path you want to control as needed.

In layman's terms, it is to find out the bus of an incoming call, the red one (which can be found according to the size of the line or other labels), connect this line to L1, connect L1, L2, L3, and L4 with wires respectively, and connect the other 4 lines to the base, L11, L21, L31, and L41 respectively.

Three switches control one head! In the middle is how to connect the four eyes! Can you come up with a wiring diagram?

I bought a bull four-hole midway switch; How to wiring.

Summary. Here's how:

L10 L20 L30 L40 is a common terminal with a live wire.

L10 L12 L22 These three terminals are a set. L22 L12 is connected to the control line of 1 lamp. (One of the two holes is connected).

L20 L21 L11 These three terminals are a group. L21 L11 is connected to the control line of 2 lights. (One of the two holes is connected).

L30 L42 L32 These three terminals are a group. L42 L32 is connected to the control line of 3 lights. (One of the two holes is connected).

L40 L41 L31 These three terminals are a group. L41 L31 is connected to the control line of 4 lights. (One of the two holes is connected).

Bull 4 open dual control 4 light switch wiring diagram.

The other three lines are connected to the zero line, and how to connect the two lines.

The line of fire and there it is.

Take a picture of the switch interface in your home** and I will take a look.

The two wires at the other end are connected there.

I don't see this very clearly, first confirm whether it is the control line of the 2 lights?

One of the four lights is one end and one to be controlled.

I think it's just two threads falling off now, right?

This is another switch, one of the three wires I connected the zero line, and how to connect these two.