How to change the font of the NOKIA5700 s mobile phone? Please explain it greatly!

It's not like 5700, the three versions of the phone are almost the same!

The font landlord looks for it himself.,There are a lot of them.,For example, Yahei.,Girl's!

How to change the font:

Method 1: Replace the font by changing the file name of the font file (do not change it to the Chinese file name), if there are two font files in the x: data fonts folder at the same time, then the font driver will read the font file with the first alphabetical order of the file name (based on the English alphabetical order).

For example, if we want to replace the Lanting font ( with Yahei font (, the initial letter of the Lanting font file name is L, and the initial letter of the Yahei file name is Y. At this time, we can change the first letter of the file name in Yahei font to the letter K in front of L, which is about to be changed, and the font will be replaced successfully after restarting the phone. This method is complicated to say, but it is actually very simple and convenient to operate.

Method 2: Find the font-driven configuration file font r in the e: data fonts folder and find enable=1 after opening the configuration file - change enable=1 to enable=0 - restart the phone and restore it to the built-in font - replace the old font file with a new font file - change enable=0 back to enable=1 - restart the phone - the font replacement is successful.

Method 3: Create a new file, you can also find a file and rename it to move to the root directory of the e-drive - restart the phone and restore it to its own font - replace the old font file with a new font file - delete and restart the phone - the font replacement is successful.

Method 4: Find the font driver configuration file font r in the e: data fonts folder and move font r to any directory - restart the phone and restore it to the original font - replace the old font file with a new font file - move font r back to the original location - restart the phone - the font replacement is successful.

How to delete fonts: Delete the font driver in the program management - restart the phone and restore it to the font that comes with it - delete the font files in the E: Data Fonts or C: Data Fonts directory.

Menu Settings Phone Settings Personalization Selection Screen Display Font Size Then there are large, medium, and small in it, and you can set it yourself. Hope it helps

1 Install font r outerlt software on your phone It is recommended to install it on the memory card, because after installing the font, if there is a software conflict or other accidents in the mobile phone system, unplugging the memory card can solve the problem.

2 .Copy the font file Huakang girly font to the e data fonts and c: data fonts directory of the mobile phone respectively, if the c: data directory does not have a fonts folder, you can create it yourself (you can get whatever you want).

Reboot your phone after the font file is copied and the beautiful font will appear.

3. Since the font file is loaded when the system starts, it is not possible to delete the font file currently used on the mobile phone or on the computer, "because the font is being used", if you need to replace the new font, you can use the following tricks.

First of all, copy the new font wryh "Microsoft Yahei" to the e data fonts and c: data fonts directory of the mobile phone respectively, because the mobile phone will automatically read the font file with the highest arrangement when it starts, and the TTF font file is arranged by letter in the fonts folder, so the system will definitely read the latter between the two font files "because the letter h of the file name is higher than the first w.

If we want to use Microsoft Yahei font, we just need to change the name to the first letter, as long as the first letter is in front of the h of HKSN.

If you want to restore the default font of the system in the future, you can just delete the font r outerlt.

Generally speaking, there are three ways to use the grid machine (remember that you must back up the data you want before the Li Yun Tange machine, etc.):

1.Software formatting: Use PSIOC software stools to format the phone, the lock code is 12345, this method will not lose line 2

2. Soft grid: enter * on the mobile phone, after which you are required to enter the lock code, the initial password is: 12345, if you have changed the mobile phone password, that is the changed password (not the SIM card password), and then a white screen appears, only which Tong shows the word nokia, 2 3 minutes after the grid machine is completed, re-enter the time; Line 2 may be lost

3. Hard grid: turn off the computer first, and then press and hold the dial key, "* key, "3" key when turning on the phone, and turn on the power until the word "nokia" appears (no button can be released during this process). Wait a few seconds until "formatting...... appearswords, then you can release the above buttons.

After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen. Line 2 will be lost

The above grid machine needs to pay attention: keep the power absolutely sufficient, do not try to shut down the grid on the way, can not plug in the charger, etc. Generally, soft grid is preferred.

4.What is Line 2 for, how can I keep Line 2 if I format my phone, and how can I recover it if it is lost.

Line 2 is used to support a card double number, for the vast majority of friends is irrelevant, but many friends still want to keep it, at this time you can use the software formatting method, will not be lost, if you need a hard grid, you can take out the SIM card and memory card after shutting down, and then press and hold the "dial key" plus "* key" plus "3 key" quietly and then turn on the phone, release the boot button after the screen is lit, and wait a few seconds until the "formating...... appearsFormat the ......Only then can you release the three buttons. After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen. Turn off the SIM card and memory card into the phone again, and press and hold " " after turning on the phone, and you will find that you can still switch lines normally.

To restore line 2, you generally need to flash the machine to recover.

Note: The battery is sufficient when the grid is used, and the data is backed up.

1.Enter * on standby – soft bar. Only restore the system to factory settings, do not delete files, the effect is not obvious.

2.Standby input* – soft and hard. Restoring the system to factory settings will delete the personal data of the C drive.

However, Route 2 cannot be retained, and it will return to its original state. Sometimes, the C disk text is not deleted with the grid machine, and the system is unstable.

Key hard grid - with trousers - hard grid. Restoring the system to factory settings will delete the personal data of the C drive. Route 2 can be reserved. It's the same as flashing. Recommended.

Hard Grid Operation Method:

It requires the cooperation of two hands and one hand to manage. Hold.

and the green call button, and the other hand just the power button. You can't let go until the handshake screen appears.

formatting...

It can be loosened, and after about two minutes, the phone will automatically turn on and it will be done. (6681 6680 6630 n70 n72 will not appear.)

formatting...

words, you can only let go when you see the setting time).