When the motorcycle E398 is connected to the computer, it cannot access the inner inch card

Your computer system is not on the right track!

It would be nice to change the XP one!

Select the location stored in the phone"Memory card"Not to pull.

The best way is to go to the seller, and if you can't solve it yourself, there will still be problems

You choose the memory card and you're good to go.

Support the "little love fan" statement.

Don't check the mobile phone, one grid will have n problems

You've only got to try it out with another memory card now, and I suspect there's something wrong with your memory card

Eliminating the warning sound has nothing to do with reading the card

The Moto E398 has not been used.

Can't format with your phone?

The 3230 I used also had the phenomenon of not knowing the card, but it was recognized with a mobile phone, and there may be a problem with the card, and there was a quality problem.

It shouldn't matter. People on the forum wouldn't be so harmful. Connect the memory card to the computer to see if there is any problem, if you don't have your stuff backed up, format the card with the computer, put it on your phone and try it.

If the software is faulty, it will be good to upgrade the phone again, or you can try it, in the phone settings, after finding the reset, reset the phone again, and reset the phone to factory settings.

The easiest way is to send it to the original for repair.

You can try it out.

You do that, it can be said that it is a small flash, it is the fault of your card, it is highly recommended to format it, and some machines just don't recognize the card after flashing.

Do you turn on the virtual memory, just turn it off, or if you don't turn it off, it just has to stop for a long time before it will be displayed.

The landlord said that the data cable can be flashed but can not be charged I use the motorola E6 should be a problem with the data cable Oh It is recommended to replace the data cable! The definition of the data cable is VCC D- D+ GND, where VCC is the positive pole of the power supply, GND is the negative pole of the power supply, D+ D- is the data transmission, can flash the machine and cannot be charged, indicating that it is VCC or GND, if there is a problem, it is recommended to replace the data cable, Motorola E6 uses a mini5pin universal cable, there are many on the market, if you can't buy it, you can find me, hehe.

Unplug and unplug it a few more times, this mobile phone is easy to get into dust, resulting in poor contact.

Flashing comes from a browser with a software called it.

Once inside, select SDCARD which is the file of the memory card.

If you click in, it says there is no permission.

You need to authorize it in the settings.

I forgot the specifics.

However, if you haven't messed with the settings on your phone, you should still be able to get in.

The landlord had better make your specific situation clear, did you put the suffix name in the mobile phone such as jar? Or directly display unknown files, can't be opened. It is recommended that you turn off the phone and take out the card again, plug in the mobile phone to see if it still doesn't work, plug it into the computer and look at it again, check the format of those files, and see if the format of the mobile phone file you want is not.

Hope it helps!

The virtual memory must be turned off, and the theme should be the default theme, otherwise it will be like this, and e6 will crash when it is serious.

PC sleeve driver.

Or just factory reset.

I also use a small e.,But I've worked hard.,Little e doesn't support the computer camera function.,I can't brush the machine.,Even if I can use it,I won't use it.,After all, the mobile phone costs more than 1000 yuan,And a better camera is only more than 100 yuan。 If the mobile phone is a camera, it is easy to damage the mobile phone, and it doesn't cost much money to buy a camera and the pixel is higher than the small e, if you just want to **, then the computer camera is definitely a good choice!

Probably not, the software doesn't support it, and I'm using e398 too.

Haven't heard of it. I'm using the e398.

The problem with the card, the card is faulty and the card needs to be replaced. Of course, it is also necessary to consider that the interface of 398 is faulty. It is recommended to replace the card first to see if it can be recognized, if not, it is the 398 memory card interface failure.

If you have it when you first bought it, then it is likely that you bought it refurbished or assembled. Have you ever swiped the machine? The title of the song is because 398 does not support ID3, you can change the properties of the song on the computer, or**a latest**device.

There are many reasons why you can't find the file, so it is recommended that you try the memory card grid.