Motorola E398 parallel import web page setting how to do 5

Updated on technology 2024-04-11
2 answers
  1. Anonymous users2024-02-07

    Go to the service hall or call 1860 to activate GPRS, and set up the following settings.

    Configuration steps for sending and receiving MMS messages: (menu names may be different).

    1. Select "Access Network" in the main menu;

    2. After entering, select "Web Settings" in the menu;

    3. Continue to select "New Entry", "Name", and fill in "China Mobile MMS (casual)"; The homepage is "written everywhere".

    Service Type defaults to WAP; "Gateway IP" is"; "Port" is set to "9201" (Note: 80 cannot be connected successfully);

    The domain name is blank by default and does not need to be filled;

    4. All the following items are left blank by default, all DNS items are left blank, and CSD dial-up connection does not need to be filled, otherwise additional dial-up fees may occur, fill in "CMWAP" in "GPRS APN" (access point);

    5. After filling in all the fields, return to the main menu, enter "Information", press the middle function key after entering, and select "Information Settings" in the menu;

    6. Select the "Multi-Information Settings" in the next menu, select "Server Information" after entering the menu, and select "Add" when entering "Server Information".

    7. There are three items: "Service Name", fill in "China Mobile MMS" in this place";Server Name, enter ".

    Set the name of the web page", select the newly created GPRS to set "China Mobile MMS";

    8. After filling in all the items, return to the "Server Information", you will see that there is one more item "China Mobile MMS", the cursor stays on the item, select the item, and then the item will be preceded by a check mark, and the setting is completed.

    GPRS parameter setting steps:

    1. Select "Access Network" in the main menu;

    3. Continue to select "New Entry", "Name", and fill in "China Mobile WAP"; The homepage is "written everywhere".

    Service Type defaults to WAP; "Gateway IP" is"; "Port" is set to "9201" (Note: 80 cannot be connected successfully); The domain name is blank by default and does not need to be filled;

    4. Leave all the following items blank, all DNS items blank, and CSD connection does not need to be filled, otherwise additional dialing fees may occur, fill in "CMWAP" in the "GPRS APN" (access point);

    5. After filling in all the fields, save and return to the previous menu, select "China Mobile WAP", and you can browse.

    6.Browse the same settings as others**.

  2. Anonymous users2024-02-06

    ???It's the network setting.

    Network Settings: Automatic.

    Type: Automatic.

    Speed: Fast.

    Service tone: On.

    Network Beats: On.

    Call Disconnect Tone: On.

    Mobile connectivity is no problem with this setup.

Related questions
26 answers2024-04-11

I use K500,Same as 506,I feel that the Suoai mobile phone is very humane,The function is entertaining,But it's not very strong,I've overhauled it twice,Motorola E398The function is similar to 506,The screen is better,If you bring a memory card, it's a little better,If you don't bring it, it's not as big as 506 memory,Siemens S65 feels not strong,The operation is not as convenient as the first two,It's almost the same as getting used to,It is recommended that you Suoai K506,Motorola E398Choose one,I will choose a motorcycle。

19 answers2024-04-11

The bit of the IMEI code is the FAC code, which means which factory the mobile phone is in when it is finally assembled. Each factory has its own codename, so it's not a code name for any country that makes it. However, in the minds of users, the location of the factory where the final assembly process is completed is considered to be the place of origin of the mobile phone. >>>More

22 answers2024-04-11

Refurbished or rechargeable machines or other junk goods, the network access permit is inconsistent, and it may also be parallel import, and the network access permit is forged. The new charging machine is someone who bought it and used it for a few days and felt bad and returned it, because the IMEI code on the box has been torn off, so it was replaced with a new box. >>>More

13 answers2024-04-11

Look at it! You go borrow a memory card first. Then deposit it on your phone. All right? Such?

11 answers2024-04-11

My friends and I use parallel goods, it feels very good, and the price is a lot lower than the licensed goods, but the Android version of parallel goods is, it can't be upgraded to, and licensed goods can be upgraded to, but in fact, there is not much difference between the two versions, I personally think that I am very satisfied with this mobile phone, I don't need to think so much, and the cost performance is very high