How do I tune the sound? How to tune the sound effect well

Reverb 7% (but I recorded it in a relatively empty place with a little echo, the maximum value of this can be adjusted to 30 so that it is not too big ) Reverb depth 13% (the maximum value is also 30) Reverb gain 9% (this must not be big, otherwise there will be echo, if you don't believe it, you can directly adjust the maximum, it is recommended not to exceed 15) Minimum delay 69 Maximum delay 36 Volume limit 78 Volume equalization 55 Gain 91 OK

Sound Enhancement to experience different sounds, adjust the volume and rendering effect yourself, and add different tones.

First of all, you should prepare the right headphones (moderate bass is recommended), and then use the equalizer to slowly tune in to your favorite sound.

If you want to have a strong sound effect, you can modulate it according to the manual when you bought it at the time, so that you can achieve the desired effect.

To adjust the sound, it's good to have access to a management system in the background.

If you want tuning, you have to learn professionally, if you can't, you can use the national K song.

How to tune the sound effect, you look at what brand of specialty store you buy, it will help you pick a good person, and you can't, you can slowly tune it according to the manual.

1.Open the Control Panel.

2.Select "Hardware & Sound".

3.Turn on the "Dolby Audio" option.

For this sound effect, the first and third ones can be turned on as much as possible, and the others can be selected according to your preferences.

You can debug this slowly until you hear that you are satisfied.

Many times you have to ask what to make it clear, explain it clearly, and it will always be convenient for us.

I don't know how to tune it out.

It would be nice to adjust the volume of the two microphones to each other.

2. At this time, there will be a sound effect switch, we click the sound effect switch below.

3. At this time, a sound effect setting window will pop up, click the "Recommended Sound Effect" button on the left side, and you can select your favorite sound effect button in the window on the right.

5. In addition, if you are listening with headphones, you can also click the "Headphone Adaptation" button, and then select your own headphone brand and model in the window on the right.

6. Of course, we can also click the "Equalizer Rock" button on the left side, and then adjust the sound effect by ourselves in the right window to achieve our own satisfactory effect.

And 59hz is a bass-heavy laugh, the higher the tone, the more shocking. 119 and 227hz are bass, and the higher the tuning, the more muffled the sound becomes. 474 is the mid-bass, 947 is the alto, and 1889 is also the alto, and these three sections are mainly vocals.

It is a medium and high tone, and the higher the tone, the more transparent. 7523 is a high pitch, and the higher the tone, the sharper the sound. 1501 is also a high tone, and the higher the tone, the more delicate the sound will be.

For bass, the ratio is as follows: from left to right (balanced first): 9 9 6 5 4 0 0 4 5 8.

3. This is the bass effect of Dolby sound, you can try it, and the effect is not bad.

Sound adjustment is mainly achieved through the volume control circuit on the machine.

For machines with volume potentiometers, adjust the potentiometers; For digitally adjusted machines, it can be adjusted with a remote control or by pressing a touch button on the panel; For wire-controlled machines, of course, it is wire-controlled operation.

There are no active speakers on the market that set volume control, and the power of this kind of speaker is generally relatively low, and the volume cannot be controlled. For this kind of speaker,Need to adjust the sound source,Such as computer volume adjustment、***Volume adjustment, etc.,If you feel inconvenient to use,You can add the wire control function to solve it。

The volume control is to reduce the volume, if the volume is not loud enough and a higher volume is needed, it can only be achieved by increasing the power of the speaker.

Here's how to adjust audio volume in our daily entertainment and daily work.

There is nonlinear distortion, intermodulation distortion, and transient distortion when the subwoofer is turned on, which is the characteristic of the coexistence of all dynamic speakers, and it took me 35 years to finally find a way - magnetic field countermeasure method, which can solve all the problems existing in the speaker. Now there are experimental and modified products that have been proven.

Features of the magnetic field countermeasure method:

1. Long stroke, 100mm.

2. Linearization is always a one-way relationship.

3. The thrust is large, and the use of neodymium magnet can achieve tens of thousands of N to trillion Ox.

4. No distortion, because linearization, nonlinear distortion, intermodulation distortion, and transient distortion do not exist.

5. The sound pressure is high, because the linear stroke is long, so the sound pressure is high.

6. High efficiency, the bigger the horn, the higher the efficiency.

7. The power is large, and the power must be large for a long stroke, and the stroke is twice as large as the power is 4 times, and then twice as large and 4 times larger.

8. In the full frequency band, the magnetic field countermeasure method can be equipped with an acceleration device, the higher the angular velocity, the greater the acceleration.

9. Dynamic range, because the stroke is long, the sound pressure is high, and the dynamic range is larger.

10. The sound pressure is easily 180 decibels.

11. Full frequency band, the loudspeaker can achieve 15Hz-25kHz because of linearization, so it solves the harmonic distortion, intermodulation distortion and transient distortion of the speaker.