What is the minimum maintenance period for epoxy grinding stone flooring?

1. Treatment of epoxy floor surface 1. The newly completed industrial floor must be cured before construction, about 28 days. 2. Remove the cement slurry, old paint and adhered garbage and debris on the surface. 3. Completely remove the oil stain on the surface and treat it with the cleaning agent of Keyouwang.

4. Remove stagnant water and dry the tide thoroughly. 5. The cleaning of the surface needs to be completed by a dust-free sweeper and a large vacuum cleaner. 6. The allowable void of the flat surface is 2, the water content is below 6, and the pH value is 6 80.

7. The hairing of the floor surface needs to be completed with a dust-free grinder and thoroughly cleaned with a vacuum cleaner. 8. Apply putty to the holes and obvious depressions on the surface of the floor to fill the batch scraping, and polish and vacuum after drying. 2. Finishing and sealing coating 1. In the treatment of clean and smooth concrete surface, high-pressure airless spraying is adopted....

It depends on the specific situation, but in general, it should be between 5 and 8 years, and this kind of success is relatively normal and can achieve a very good result.

The minimum maintenance of epoxy grinding stone flooring is more than one year. I think this kind of maintenance is still good, I think this kind of maintenance can keep the ground flat.

Precautions for cleaning.

Terrazzo. Floor cleaning is very important, cleaning and maintenance are integrated, you need to be cautious, if you are too careless, it is easy to produce dirt and rust on the terrazzo floor that is difficult to remove. Terrazzo flooring requires a great deal of patience and care.

Attention needs to be paid to the initial maintenance of terrazzo floors, and the wax should be completely sealed. The porous cement ore is sealed from the inside with a non-yellow wax, and then the floor is mopped daily for the first few months to remove minerals from the ground as much as possible. When a thorough cleaning is done, it is necessary to wax again.

Clean carefully every day, with a broom, with a vacuum cleaner.

Clean, mop the floor with a treated oil-free mop, polish it with synthetic fiber pads, and in a way, need to take care of it like a s** that pampers us.

Make your own plan, regularly clean and maintain the ground, wet the ground with clean water, and then use flexible detergents, mop or vacuum suction to clean and polish the ground, and you can also seal the wax with synthetic products that terrazzo ** merchants generally recommend.

Polishing with a synthetic polish with terrazzo, using this technology, if properly maintained, it can be kept for three years without waxing, or even longer, if the ground is really damaged, it needs to be paved with new ground and resealed.

This minimum warranty period is three years, but there are also five or ten years of service.

His maintenance time should be more than one thought, so most of the shelf life is one year or the warranty period, so the specific situation should be treated separately.

The minimum warranty is two years, so this period can also be extended by three to five years.

The duration of general maintenance is not more than three years, and maintenance is once every three years.

The maintenance period is generally about three years.

Depending on the process you do, Party A will have a contract to provide and have regulations.

The minimum warranty for epoxy physical bottles is within three years.

They all have operating standards for this, and as for the warranty period, there are also corresponding standards, you can check it.

The minimum maintenance period of epoxy grinding stone floor is several years, and I think the minimum maintenance of epoxy grinding stone floor is about three years.

The minimum maintenance period of epoxy grinding stone flooring is a few years, and I think that the minimum maintenance period of epoxy grinding stone flooring should be the first grade.

Under normal circumstances, the minimum maintenance regulation of the floor level of epoxy magic stone is maintenance once every three years.

The correct use and maintenance of epoxy flooring can significantly improve its performance and prolong its service life, so the following aspects should be paid attention to in the use of epoxy flooring:

1) After the construction is completed, it must be cured for more than 7 days to ensure that it is completely cured before it can be used. There should be no water, various solutions and solvents for 7 days.

2) Prevent hard and sharp objects from directly contacting and rubbing against the ground;

3) Those who enter the workshop must change into soft rubber shoes to avoid bringing sediment into the workshop and scratching the ground;

4) For highly corrosive chemicals splashed on the ground, they should be removed in time;

5) The oil stain spilled on the ground must be removed immediately, otherwise the ground will become slippery and easy to cause injury;

6) When walking on all kinds of carts or trailers, you should try to slow down as much as possible, and avoid sudden braking or sharp turns;

7) When handling equipment and stacking items, lay soft cardboard on the surface of the epoxy floor to avoid scratching the ground.

Avoid sun exposure to avoid yellowing and discoloration of the epoxy floor coating film.

2. Avoid frequent boiling water flow or chemical solvent impregnation of the surface, so as to avoid softening of epoxy ground.

3. Do not use more than 30% concentrated acid to erode the floor.

4. There are often chemical solvents used on the ground, there is the possibility of being dyed, and the light-colored ground is especially obvious, which is often not because of the solvent itself, but because other media falling on the ground are dissolved, this pollution is generally difficult to remove, and there is rusty ground, such as long-term pollution, the ground often cannot be cleaned, so these situations should be avoided.

5. Do not use hard objects and sharp objects to directly impact the floor. Once there is a wound scratched by an accidental sharp object (repairable, but there are marks), the scratch should be repaired in time when the scratch is deep, otherwise it will affect the adhesion of the surrounding coating film.

6. Indoor electrical welding and cutting construction, and large equipment must be padded with a protective layer to avoid wear and tear of epoxy coating.

7. The splash must be cleaned in time during pickling or alkali washing after welding, and if there is splashing condiments and oils in daily life, wipe them with a rag.

In the case of construction while production, the construction environment should have sufficient isolation area to prevent ash and sand particles from seeping into the paint film epoxy floor that has not dried.

Areas that are susceptible to contamination, and more conspicuous façade areas, corridors should be cleaned with a mop 1-2 times a day.

If there are coarse and hard sand grains, mud and other debris on the ground, it should be swept away in time to avoid sand particles grinding the ground and reducing ground wear.

1. Prevent hard and sharp objects from rubbing directly against the ground. Corrosive chemicals and solvents that fall to the ground should be removed immediately. The grease spilled on the ground must be removed immediately, otherwise the ground will become slippery and easy to cause injury. Hard weights must be handled gently.

2. The floor of the machine console and the floor of the heavier raw materials, semi-finished products or finished products storage area are covered with a rubber mat or soft plastic pad. For areas where electric welding or oxygen cutting is often required, steel plates or other high-temperature isolation mats should be laid on the ground.

If you don't want to accept your fate, go and work hard! Pay will be rewarded, big or small, sooner or later, will never disappoint your efforts! There is a gap that you always envy the success of others, but you dare not start! It's never too late to act now!

The battery is insufficient, and the outside temperature is too high and too low, which will cause the car to start and stop and fail; If the new battery is replaced, the automatic start-stop function of the car fails, and the special start-stop battery may not be replaced; If you change it correctly.

1.Regular cleaning Floors generally need to be cleaned, and epoxy flooring is no exception. Regular cleaning of epoxy flooring ,..

2.Prevent sharp objects from rubbing directly against the ground When we use hard objects, we should pay attention to handling them with care, as much as possible.

3.Spilled items should be cleaned up in time If the corrosive chemicals and solvents that are being used suddenly splash on the ground,..

4.Routine maintenance.

Customers who are interested in epoxy flooring may have a preliminary understanding of epoxy flooring through various ways, but they may not be very clear about where epoxy flooring is used and its service life? Let's introduce it to Shanghai Zhengou:

The scope of application of epoxy flooring is quite wide, it is generally suitable for a place where there are strict requirements for environmental conditions, and a good decorative effect and may have chemical media erosion. In view of this situation, we can analyze that epoxy flooring is especially suitable for medicine, hygiene, food and hospitals, laboratories and other places with special requirements. If you are very concerned about the decoration aspect of your home, of course, you can also choose this one, but it may increase your cost relatively speaking.

In view of the above situations, what is the term of use of epoxy flooring? I couldn't have spent so much money on it, and it didn't take a year or two to be useless, which was quite uneconomical. Of course, you can rest assured that epoxy flooring can be used for a period of more than 15 years, and whether it can be maintained for a longer period depends on your usual care and care for it.

Normally, epoxy flat-coated flooring can generally be used for 3-5 years; Epoxy mortar flooring can generally be used for 5-8 years, and epoxy self-leveling flooring can generally be used for 5-8 years.

Epoxy floor paint curing:

1. Daily cleaning can be cleaned with a soft broom or rag;

2. When seriously polluted, use neutral detergent, wash with rag water, then wash with water, fully dry, and apply a thin layer of wax;

3. When the ground is splashed with acid, alkali and other chemicals, it should be cleaned with water in time, and when it is splashed with seasonings, oil, etc., wipe it with a rag;

4. The smooth coating can be regularly maintained with bright wax to maintain the long-term beauty of the floor.

It usually takes 3 to 5 years, but it depends on the process and materials you use for construction. Generally, the ground foundation should be good, the process should be constructed according to the conventional process, and the thickness should be up to standard, and the number of years that can be used should be more. If the foundation is not good, it won't take long.

If the ground is well treated, the other influencing factor is the thickness of the floor paint. The products of different manufacturers are different, and the required thickness and age data are also different. The data is not the same for different products.

First, take Ascentage epoxy mortar floor paint as an example:

Wear-resistant, dust-proof, high hardness, can withstand strong impact. It is mainly used in machinery factories, elevator entrances, driveways, etc., which are resistant to strong impacts.

1mm thickness, more than 5 years of use.

2mm thickness, more than 8 years of use.

3mm or more, can be used for more than 15 years.

2. Epoxy industrial floor paint:

Wear-resistant, pressure-resistant, impact-resistant, used in warehouse workshops, etc.

The service life can reach more than 5 years.

Wear-resistant flooring is constructed in conjunction with concrete flooring. If the ground is not required to be dustproof and dust-proof, it is better to be wear-resistant. Epoxy flooring is certainly the best.

Epoxy floor paint is the best value, high quality, high requirements of the product, the correct use of the way can make the ground always keep as new, and can maintain a long service life. The specific recommendations are as follows: do not abuse the machinery, try to avoid excessive knocking on the ground when using, do not hit the ground with very heavy or hard objects, unless the work requires, please avoid frequent unnecessary wear and tear.

Especially for ESL flooring, in order to maintain its advantages of smooth and meticulous appearance and beautiful appearance, special attention is paid to avoiding traffic such as steel wheels; Do not overload traffic and loads, and be careful to avoid scratches at the contact with the ground. Surface cleaning, epoxy floor surface cleaning method is simple, generally scrubbed with water. If the stain is difficult to clean, you can use a cleaning agent, or you can use an industrial grease remover, descaler, etc., and then rinse it with water.

For quite stubborn stains, mechanical cleaning methods can also be used, but do not apply pressure to the ground, wear too much to affect the smoothness and luster of the ground. Floor-aesthetic In order to maintain a good surface finish and aesthetic effect, do not use mechanical methods to clean, you can use a mop and detergent, and remove it with water. Avoid chemical pollution Because it is mainly used in the dust room, laboratory, electronic production workshop, in order to maintain its beauty and other good performance, usually pay attention not to drop chemicals, especially organic acids, to the ground, after the ground is polluted, it should be cleaned with water immediately.

For chemicals that are difficult to clean, or when the floor is stained and difficult to remove, a small amount of acetone can be used for quick cleaning, and be careful to ventilate this operation. Do not abuse heavy machinery on the epoxy floor, pay attention not to hit with heavy objects when working on the epoxy floor, avoid wear and tear in use, if there is wear and tear, it should be protected and repaired in time, wear soft cloth shoes when walking on the surface of the epoxy floor, do not wear high heels, leather shoes, equipment placed on the surface of the epoxy floor should be wrapped with soft objects, the epoxy floor has a certain acid, alkali salt, oil resistance, but in daily use, we should try to avoid oil, acid and alkali salts contact with the surface of the floor, If you come into contact with contaminants, you should clean it with a soft cloth in time, and when there is a large area of damage, you should find a professional construction team to repair it in time.

During the curing period, it is strictly forbidden for any personnel and equipment to enter, and to take measures such as rainproof and waterproof, the curing period is generally at least 7 days, and it can be put into use only after reaching the curing period. Generally, after 7 days (temperature 25 degrees), the epoxy floor structure is completely stable and achieves the ideal physical and chemical properties. Epoxy flooring needs to be kept clean and hygienic frequently, it is recommended to enter the occasion of the floor, should be replaced with soft-soled shoes (such as rubber shoes), if there are dust particles, hard material broken particles, etc., need to be cleaned in time to prevent hard and sharp objects from directly rubbing the ground, so as not to slide and damage the floor after rolling, personnel from the outside do not bring in dust, and use different forklifts inside and outside.

Hard and heavy objects must be handled lightly to avoid overweight machines and objects directly hitting the floor paint and avoiding scratches by sharp objects. Timely removal of oil and chemicals: for splashing or dripping oil and chemicals on it, it is necessary to remove it in time, otherwise it will make the ground slippery and easy to cause injury, and at the same time, it will cause corrosion for too long, affecting the appearance and service life.

It can be cleaned and maintained by the same cleaning and maintenance methods as the general floor, and the daily cleaning can be cleaned with a soft mop and rag.