How are everyone s DSP sound effects set up?

Tried it. I feel that dao is more suitable for me to use. There are so many v4a setup options.

When I got into the system, I deleted the DSP and then it was gone.

I used to be too, and I just streamlined it. Recently, I found that it feels very easy to use. I just want to look into it.

The DSP tuning tutorial method is as follows:

In general, if you adjust it yourself, first cut the frequency to generally high-pass 60hz low-pass 20000hz. There is also a slope bar, you can try the slope feeling by yourself, which one you think is comfortable, which one sounds good, and then you can adjust the EQ.

There are three points, one is 180Hz, one is 800Hz, and the other is 8000Hz, and these three points go down, forming a trough. Other frequencies can be adjusted by yourself, how comfortable you feel, and then if you delay, you can adjust the left high hall to the front door. We listened as we tuned until we felt like the sound was coming from the middle of the meter.

If you want to tune, it's better to go to a professional store, because there are a lot of things that can't be explained, and tuning is too dependent on the sense of tone, and there is no certain level of tuning.

Summary. 1. You can try the slope by yourself.

2. Other frequencies can be adjusted by yourself, how you feel comfortable and how to adjust.

3. If you want to tune, it is better to go to a professional store.

dsp

A DSP (Digital Singnal Processor) is a unique microprocessor that processes a large amount of information with digital signals. Its working principle is to receive an analog signal, convert it into a 0 or 1 digital signal, and then modify, delete, and strengthen the digital signal, and interpret the digital data back to the analog data or the actual environment format in other Qishou system chips.

The DSP tuning tutorial method is as follows:

Material preparation: DSP, laptop.

Operation steps: 1. Approximate situation, if you adjust it yourself, first cut the frequency to generally high-pass 60Hz and low-pass 20000Hz.

2. There is also a slope bar, try the slope feeling by yourself, which one is comfortable, which one sounds good, and then adjust the EQ.

3. There are 3 points, one is 180Hz, one is 800Hz, and the other is 8000Hz, and these 3 points go down to form a trough.

4. Other frequencies are adjusted by themselves, how to adjust the manuscript comfortably, and then if it is delayed, just adjust the left front door.

5. Listen to the tune of filial piety until you feel that the sound is coming from the middle of the meter.

6. If you want to tune, you still have to go to a professional store, because there are a lot of things that can't be explained, and tuning is too dependent on ear power, and it is not good to tune at a certain level.

The DSP tuning tips are as follows:

1. Regarding microphone whine, usually the microphone howling is caused by the excessive volume of the microphone, and it is necessary to take a closer look at whether it is caused by the excessive volume of the microphone or the excessive volume of individual microphones.

Another cause of microphone whine is the sound quality of the microphone, listen carefully to the frequency of the whistling: the very harsh scream is caused by the mic treble, and the microphone treble must be reduced. If it is a deep whistling noise, and you feel a little vibration, it is caused by too much mic bass, and the microphone bass must be reduced.

2. Volume adjustment.

The purpose of volume adjustment is twofold: one is to control the dynamic range of the sound signal, and the other is to adjust the proportional relationship between the signals. Volume adjustment needs to be done in conjunction with sound quality compensation, because volume and frequency are inseparable.

Therefore, before tuning, the dynamic level, frequency characteristics and the proportional relationship between the various signals on the scene should be well understood, and it is necessary to listen to it many times and debug it repeatedly, and at the same time, it is necessary to take into account the various conditions and playback effects of future playback.

3. In the process of tuning, the reverberation usually determines the length of the aftersound, which has a direct impact on the color and clarity of the sound. In general, for example, when the bass is singing, the reverberation time can be adjusted shorter to improve the clarity of the voice. When a soprano sings, the reverberation time can be appropriately extended to increase the color and thickness of the voice, and it sounds more tense.

1. After opening the PC software, the software will automatically connect to the machine. Import pass-through data. Because the manufacturer has built-in data for different models, these data can reach 70% match, but cannot reach 100%, so we need to delete these data and import the pass-through data.

Straight-through data means that the gain of EQ is 0) Generally, the last few groups are pass-through data, click the left click, and the software will automatically import the data.

2. Enter the advanced mode, observe the input and output EQ window, and the frequency response curve is a straight line, that is, it is straight-through. This is very important, and it is related to whether a good emperor can be transferred in the next step.

3. The emperor's seat: As the name suggests, that is, the position where the emperor sits, and the main driver's seat is generally chosen. What effect can be achieved by adjusting the emperor's throne:

We all know that the car listening environment is more special, the main driver's seat can almost be close to the left horn, and the right horn distance can reach more than 1 meter, don't look at this more than 1 meter, the impact on our listening habits is very large, and to make it clear that the sound can not reach our left and right ears at the same time, so we have to find a way to eliminate this phenomenon, so that the sound of the left and right horns reaches our ears at the same time.

4. What is the function of adjusting the emperor's position: the delay function, we don't mean that the sound cannot reach our ears at the same time because the distance between the left and right speakers is the same, then we know that the sound can be transmitted in the air, then we can let the left sound come out later.

DSP tuning skills.

There are many people who don't know how to tune the 31st rank, so today I would like to share a little experience with you, I hope it can help you.

1.Approximate situation, if you adjust it yourself, first cut the frequency to the general high-pass 60hz low-pass 20000hz

2.There is also a slope bar, try the slope feeling yourself, which one is comfortable, which one sounds good, and then you can adjust the EQ

3.There are three points, one is 180Hz, one is 800Hz, and one is 8000Hz, and these three points go down, forming a trough.

4.Other frequencies are adjusted by themselves, how comfortable and how to adjust, and then if it is delayed, just adjust the left front door.

5.Listen as you tune in until you feel like the sound is coming from the middle of the meter.

6.If you want to tune, you still have to go to a professional store, because there are a lot of things that can't be explained, and tuning is too dependent on ear power, and it is not good to tune it without a certain level.