How can an iPhone go wireless

The wifi function of the iphone can indeed be used with the computer When your laptop is in the network state, turn on the wireless function of the notebook, set up the wifi network in your iPhone, search for your notebook, match it, there should be no problem, this is a distance, basically you can use it at home, and the notebook can be turned on.

Wireless router is a wireless modem that converts the originally wired network into wireless signal transmission and covers the area of your home, and you need to purchase a wireless router to set it up.

The e next to the signal represents the edge network o is also similar to the meaning of the general signal is not good in the place o but this network signal source refers to the network of your mobile phone service provider and the previous wifi wireless network is not the same concept This is covered with the mobile phone signal.

CMWAP on the iPhone Not every one can be used This is related to the mobile phone service in various regions This has been proven Some places can be used Some places can not be used And this function is not only simple to set mobile phone options, but also need to use third-party software to enter the iPhone system to modify some parameters to have a certain chance to be used Quite inconvenient Personal recommendation or use China Mobile's edge function You can surf the Internet anytime and anywhere This should be opened by contacting 10086 Then in the small P network settings edge or cellular data column fill in cmnet and then the username and password are empty on it The disadvantage is that the network speed is not fast and the charge is quite expensive According to the traffic, it is 3 cents 1kb During the day, you open a forum Log in to view the reply to the post Such an action is basically 5-8 yuan.

It is best to have wifi at all times That is, completely free Internet LZ can be set up at home with a wireless router ps: Because Chinese mainland has not yet promoted WiFi everywhere So it can only be used in a few places for the time being.

Buy a wireless router, set it up, turn on the wifi and go directly to the Internet.

1. If you want to log in to the wireless network on your Apple phone, you first need to click [Settings].

2. Enter the [Settings] page and click the [Wireless LAN] button.

3. Enter the [Wireless LAN] page and click the name of the current wireless network.

4. Then enter the password of the wireless network, and then click the [Join] button in the upper right corner of the page.

5. After successfully logging in to the wireless network, the user can use the wireless network to access the Internet, and the wireless network icon will be displayed at the top of the mobile phone page.

Tool: iPhone 6S

Operating system: iOS

1. First of all, turn on the wireless network in the settings of the Apple phone, as shown in the figure below

2. Click on the wireless network you want to connect to, as shown in the figure below

3. Enter the wireless network password, as shown in the figure below

4. Then you can see a checkmark, which means that the wireless network has been successfully connected, and the wifi logo will also appear on the top of the mobile phone, as shown in the figure below

Apple iphone 6 phone to turn on or off Wi-Fi:

1. Go to "Settings" > "Wi-Fi".

2. Turn the wifi on or off: Choose to turn the wifi on (green) or off (gray).

3. Join a WiFi network: Choose WiFi, wait a few moments for your iPhone to detect a network within range, then select a network. If needed, enter your password, then tap Join. (Networks that require a password have a lock icon).

Once you have manually joined a WiFi network, whenever that network is within communication range, the iPhone

Automatically joins the network. If more than one network you used before was within range, your iPhone joins the last network you used. When your iPhone joins a WiFi

Once networked, the wifi icon in the status bar at the top of the screen shows the signal strength. The higher the number of grids, the stronger the signal.

4. Set your iPhone to ask if you want to join a new network: Choose WiFi, then turn Ask to join a network on or off. This option instructs your iPhone to look for other networks when you're trying to access the Internet, such as by using Safari or Mail, and you're not within range of a previously used WiFi network.

iPhone displays a list of all available Wi-Fi networks, and you can choose one of them. If the "Ask to join network" option is turned off, it will not be available on a previously used network or cellular** data network.

You must manually join a network to connect to the Internet.

5. If you don't want to join a WiFi network automatically: Choose WiFi, then tap next to one of the networks you've previously joined. Then tap "Forget this network".

In this way, even if the WiFi signal is within range, the iPhone will not automatically connect to that WiFi and will need to be connected manually. If you want to restore automatic connection, you need to go to Settings > General > Restore and select Reset Network Settings.

6. Join a closed WiFi network: To join a WiFi network that doesn't appear in the list of scanned networks, choose WiFi > Other, then enter a network name. If the network requires a password, tap Security, tap the type of security used by the network, and then enter the password.

You must already know the network name, password, and security type to connect to a closed network. Some WiFi networks may require you to enter or adjust additional settings, such as a client ID or static IP address. Ask your network administrator which setting you should use.

7. Adjust settings to connect to a VPN: Use the Network settings to configure a VPN (Virtual Private Network) connection, access WiFi settings, or turn data roaming on or off.

Enable method: Set the general network wireless LAN, set it to on, and you can turn on the wifi function. After opening, your iPhone will display the menu "Choose Network", under the selection will be displayed the current search for the WiFi network, at this time you only need to find the corresponding network and click to connect, if there is a WiFi network set encryption, you need to enter the password according to the prompts to connect after passing.

After setting up WiFi successfully, a fan icon will appear next to the network icon in the status bar at the top of the phone screen.

When the mobile network of the mobile phone and the wifi function are turned on together, the mobile phone will give preference to wifi. When the wifi signal is weak, in order to avoid mobile phone data charges caused by automatic connection to the mobile network, it is recommended that you turn off the Internet function when using WiFi.

Settings - Wi-Fi (On).

Settings - Wi-Fi (On) - to connect to Wi-Fi.

If your wireless home network is gray, then it means that your mobile phone can not be connected to wifi This has to be replaced by the store to change it within a year I don't know what your situation is I used to be like this I couldn't connect to wifi for a new machine.

1. Open the mobile phone [Settings], and then turn on the wireless LAN. (as shown in Figure 1 and 2 below)2, and then see the tp-link b280 this, it will be connected naturally. As shown in Fig

3. After connecting, you can enter the router settings to open safari Apple's built-in browser, other browsers are also OK, here.

password. 4. Enter the routing settings page, and you will automatically jump to the settings section. Click Next. (as shown below) here I chose to use the account password.

code to connect to broadband, and then enter the username and password given by the carrier.

Hehe! Unicom's version of Apple's 3G chips and systems have been brushed by Unicom! No wifi function! It's like a mobile phone coming out of telecom is absolutely no wifi function! It is recommended to change to Meizu's.

Click Settings on your iPhone.

Once in Settings, tap Wi-Fi in Settings.

Click on the Wi-Fi interface in the "Use Wi-Fi vs. Cellular Apps" section.

After clicking to enter, there will be all the apps in your phone, select an app that you can't open.

After clicking to enter, check if it is due to accidentally clicking Close, if you click Close, the app will not be able to access the Internet.

Select the second option: Wi-Fi. If you need to turn on the mobile network, you can also select the third option: Wi-Fi and mobile network. In this way, even a single app that has been turned off can also go online.

Hello, if the Apple mobile phone only allows the use of wireless network, it mainly needs to be set up in the cellular network, and the setup steps are as follows:

Open your phone's settings.

Find the cellular network, enter.

The green button on the right indicates that you can use mobile or Wi-Fi, and if it is turned off, you can only use Wi-Fi.