Why do I start the accelerator computer wants me to be sure if I install this plugin software

1. First of all, clean up the system startup items, there are some software that is automatically installed through the system startup items, then we can prohibit this part of the startup items, take 360 Security Guard as an example, open 360 Security Guard, select View in turn and click "Startup Items" under "Optimize Acceleration", find the self-starting software you found, and set the prohibition of startup.

2. Use the 360 traffic firewall to prohibit the rogue software from accessing the network, enter the 360 traffic firewall, and prohibit the software from accessing the network in the management network speed setting.

3. View the boot items through the system command, open "Start" and select "Run", enter "msconfig" and select "OK", find the startup item with the path C: documents and settings in each tab in the system configuration utility, and disable it.

4. If the above methods are not clear, you can enter the computer security mode for anti-virus scanning and uninstall the startup items, and the method of entering the safe mode is to press F8 when you turn on the computer and a menu will appear, select"Safe mode"to enter.

5. Of course, in the process of daily installation of software, prevention should be the main thing, and prevention and treatment should be combined. Do not ** software of unknown origin, the ** software should be scanned for anti-virus, and the installed software must be removed to check the option to install other software.

Either there is too much junk on the computer, or the network is not good.

The main symptoms. It takes a long time for the computer to turn on and enter the desktop.

Possible causes. 1.There are many startup items at boot.

2.There are too many files on the desktop or insufficient space on the system disk.

3.Excessive disk fragmentation.

2.Check the options that need to be optimized, click [Optimize Now] - select this game not to start.

3.Disable boot items that do not need to be booted in Startup Items:

Xunyou accelerator is the kind that records your IP. They have data in the cloud, and you can't use it if you delete it locally. The last time I was in an Internet café, I used Xunyou, and I restarted it once in the middle, and the result showed that I couldn't go up.

You can change the machine again. Unless your IP has changed. There is a way to change the IP.

It is determined according to the address of your network card, and if you want to continue the experience, you can have a virtual MAC address.

The solution to this problem is to change the user's user variable mode to not include the path in Chinese. The specific operation steps are: (1) Click the "Start" menu with the mouse on the system desktop, then right-click on the "My Computer" icon and select the "Properties" command.

2) Then a "System Properties" window will appear on the screen, click on the "Advanced" tab and click on the "Environment Variables" button (Figure 1) to enter the "Environment Variables" setting window (Figure 2). 3) In the list box of "User Variables" at the top of the window, the settings of the user variables temp and tmp will be displayed, at this time, you need to click the "" button to modify the variable values of temp and tmp, that is, the variable value is changed from "%userprofile%ocalsettingstemp" (Figure 3) to "x:temp", where X is the drive letter of a logical partition, if you want to set it in the D drive, then X will be replaced by the letter D.

4) Click the "OK" button to save the exit, and then reboot the system to solve the problem that the path cannot be found when installing the software. I didn't insert more**, but you can take a look at the link to this address.

If the problem can be solved, it would be fine.

System error, if all the software cannot be installed, it is recommended to reinstall the system.

Is this one software installed like this? Or all of them? The above shows that the file cannot be found.

Either it's a virus or there's an error in your hard drive.

Hope the landlord can post a complete reminder.

It's easy for others to analyze.

But let me start with a few of your possible questions.

Because you are sharing a line with others, in this case, it is true that it cannot be ruled out that others deliberately use software to restrict your access to the Internet, because you are competing for bandwidth.

I think the possible reason is probably that you use bandwidth-occupying software such as BT, and once this kind of software is running, others basically can't access the Internet, which is really frustrating.

This kind of software can restrict your MAC address, even if you change the IP, it's useless, the solution is that you also install one"Cyber Enforcement Officer"

This will make his IP be warned of a conflict, you just need to restart the computer, you can find out who is in charge of you, and it will take 20 to 30 minutes for the machine to reconnect to the network, unless he restarts the routing and other connection switching devices.

In the Device Management window, select your NIC and double-click it. In the NIC properties window that appears, select the Advanced tab. Select Network Address in the list of attributes, and select the radio box before Value on the right.

Enter the MAC value you recorded, and note that there is no space between the values when entering, and you do not need to enter the "-" sign. Now you can use ipconfig all to see that the MAC address of this machine has been changed to the value you entered.

This is a more intuitive way, and there are other ways to modify the registry, or use hacking software, which can be achieved, and this is available for searching on the Internet.

Then set it inside"Custom IP rules"to prevent anyone in the LAN from ping you, or to disable connections, sharing, etc. within the LAN.

These can be set in Skynet.

If it is the same computer in different network environments, the speed is very different, then there is a problem with the network, such as bandwidth, network peak periods, etc., if the same network environment is in different computers, the speed is very different, then it is a problem with the computer, you said that there are many plug-ins in the computer, which will affect the network speed, and there are too many boot startup programs, too many junk files in the computer, and so on!

Looking at him like this, I can't say clearly, I must have assigned him a bad computer, haha, the hardware is too poor, of course it's slow.

Use 360 - plug-in scan to see if there is a plug-in.

Or in IE - Tools - Internet Options - in the Program tab click on the Manage Add-ons, which is based on the search - here may be the English name, it should be like the name of PPAP.

This question Then you first click the left button on the icool accelerator,See if there is a hook there for automatic acceleration,If not,Press automatic acceleration and then pause the task,Start the task again,It turns。

If there's a hook in the auto-acceleration, you just pause and start again.

If both of the above don't work, it means that your accelerator is about to be upgraded, or your internet connection is a little slow.

That's all I can help.

There's no way around this. Or you can use a different accelerator. That speed tour, Thunderbolt are all free.

No, mine doesn't need to be verified! You need to see if your computer has any special antivirus software installed.

Or a cleanup tool. It seems that there is a software called "crisper box" that will automatically clear the local directory of UU, and if it is Bi Yihuai, you can uninstall this kind of software and modify other software. Hand friends.

If you feel that you don't use the mandatory installation software often, you can uninstall it from the control panel, or use 360 Security Guard to uninstall it. And it is recommended to take a look at the options when installing the software in the future, and do not blindly click next in the installation.

Users who use the "Strong Uninstall" function for the first time need to go to the "Unadded Function", look for "Strong Wheel Finger Uninstall", and click Add. The added user needs to click "Force Uninstall" to activate the program.

Then, on the "Software Uninstall" interface, click the drop-down arrow to list the software to make it easy for users to select the software they want to uninstall. Select the software you need to uninstall, and then click "One-click Uninstall" at the bottom right to wait for the software uninstallation to complete.