-
at the front door. and the back door to make a mesh hole flat door, and then add a rainproof plate on the outside of the front and rear doors. This is less than IP65
But you can open two 150*150 heat dissipation holes on the front and rear doors, install dustproof cotton, and install the fan "fan quality must be good". This makes it possible to bring down IP65. The 4 fans can completely dissipate heat, I have seen others do it.
-
The heat dissipation of the cabinet is mainly in two aspects: first, ventilation and heat dissipation are realized through high-density meshes; The second is to achieve ventilation and heat dissipation through the fan on the cabinet!
High-density mesh generally refers to the dense mesh made by the operation of high-quality cold-rolled steel plate through the operation of a punch. This is understood as soon as you see the actual cabinet.
-
Outdoor IP65 If you have a fan port, you can't reach IP65, you can try to use water cooling or heat exchanger, but this will increase the cost, and heat dissipation still depends on how much heat is inside your case, and then choose a solution according to the situation.
-
Cabinet with curved mesh roaring door.
It has a ventilable front and rear doors with high-density mesh roar to facilitate ventilation and heat dissipation.
-
It is easy to dissipate heat in the outdoor cabinet, mainly in the case of heat dissipation, but also to ensure that rain and dust do not enter the cabinet. There is now a comprehensive protective ventilation filtration device on the market, with air inlet and air outlet, protection level IP65, which can ventilate and prevent wind and sand.
-
If there is a special air conditioner for the cabinet in the outdoor cabinet, there is no need to worry about the heat dissipation of the cabinet.
-
Answer: Grinding This is an auxiliary heat dissipation measure by sanding the layer of tin off the outer membrane of the CPU with sandpaper until the red copper is exposed, so that the high temperature inside the CPU core can be conducted out more quickly. This method is extremely dangerous, and only daring advanced players dare to try it.
The exhaust fan should be installed directly below the power supply to extract the air from the chassis and cool the chassis. You can also install an exhaust fan at the bottom of the case panel to draw in cold air, and an exhaust fan on the rear panel of the high temperature area near the CPU and graphics card, so that the wind force of the fan can be used to form a convection flow in the case and accelerate the dissipation of hot air.
-
Install an air conditioner on the front of the cabinet, and the exposed part of the air conditioner is dustproof and waterproof. You can also use the shutter structure with the opening downward, add an isolation board inside, and add a dust net, this structural design can be dustproof and waterproof and can also dissipate heat, but the heat dissipation is not large, if the equipment installed in the cabinet does not generate much heat, it can be used.
-
Yes, the cabinet can't help but dissipate heat. However, there are now integrated ventilation and filtration devices on the market, which can solve this headache. It seems that the protection level can reach IP65, and many electrical factories now use this.
-
Add a fan, or install an air conditioner in the computer room.
-
Add a fan or add a cabinet to attach an air conditioner.
-
If the heat dissipation is not good, it can be flexibly remedied, such as remedies during installation, that is: the installation location is placed in a more ventilated place, or a place with air convection; Add a fan to remedy, in the empty place of the cabinet, open a hole, install a cooling fan, the built-in way is more beautiful, it is really not good, and the external one can also be used; Add air conditioning to remedy, and where conditions permit, add air conditioning in the computer room, which will solve the problem.
-
You are a cabinet with a few fans, you look at the speed of the fan, if the heat dissipation caused by the fan is not enough, you can change the cabinet fan, if the cabinet fan is not problematic, then you can change the front and rear doors of the cabinet to the ventilation mesh door.
-
Install a fan inside, put it in a more ventilated place, or a place with air convection, and install an air conditioner outside.
-
If the heat dissipation is not good, it can be flexibly remedied, such as remedies during installation, that is: the installation location is placed in a more ventilated place, or a place with air convection; Add a fan to remedy, in the empty place of the cabinet, open a hole, install a cooling fan, the built-in way is more beautiful, it is really not good, and the external one can also be used; Add air conditioning to remedy, and where conditions permit, add air conditioning in the computer room, which will solve the problem.
-
You can open the door of the cabinet or use an electric fan to blow air on the cabinet.
-
I've done one of these calculations before, and although the data is not very accurate, it still works.
1. Before the test, prepare a fan, as long as it can blow out the air, and prepare a heat detector.
2. The front and rear doors of the cabinet are all opened, and the fan is blowing on the front door of the cabinet, and the temperature at the front door is recorded at the same time.
3. After the heat detector is digitally stable, go to the back door of the cabinet for data detection.
It can basically be calculated from the two data before and after.
Hope it helps.
-
Huaxinfeng's comprehensive protection integrated ventilation filter window has a protection level of IP65, high ventilation rate, fast heat dissipation, and waterproof and dustproof.
-
Generally, the computer room has a constant temperature system, and some cabinets can also be equipped with radiators.
-
A fan is installed on the top of the cabinet, you can take a look at the cabinet of Datang Guard, there are generally 2-4 fans on the top, and the heat dissipation effect is very good.
-
If possible, install air conditioners, and install a few 220V 12038 fans to extract hot air when there are no conditions.
The IP protection level is composed of two numbers, the first number indicates the level of dust protection and prevention of foreign intrusion, and the second number indicates the degree of airtightness of moisture and water intrusion. >>>More
IPXX Dust and Water Resistance Rating is suitable for all equipment that requires dust and water resistance. >>>More