Urgent! Use a network with your neighbors at the same time

The network cable is correctly connected The quality of the network card is excellent Up to 120 meters can be connected Generally guaranteed 90 100 meters There is no problem within 70 meters Pay attention to the method of network cable connection must be correct Otherwise, 20 meters may not be connected (the test is passable, that is, you can't go online) The routing must be used But you can not buy a router You can turn on the routing function of the modem But you still have to buy a switch or hub It is recommended to buy a multi-port router.

Use hubs instead of routing. The theoretical length of the network cable should be less than 150 (Category 5 cable), and the quality is more than 100 meters.

You can also use a network cable, but then you can't access the Internet anytime and anywhere, and if the other party's machine is not turned on, you can't access the Internet.

Different types of wires are different, but I believe that they are generally sufficient, at least within 100m. If you want to surf the Internet at the same time, buy a router, which is the best option.

Surfing the Internet with neighbors is to set up a local area network, and the distance is not a big problem, and more than 1,000 people in our company are in the local area network. To set up a local area network, there must be a host, and the settings of other computers cannot use the same IP as the host, such as the host computer, then another computer will use it.

In general, 100M is OK, and it is recommended to use a router with a hub without a route, and the distribution of network speed is reasonable.

You can use a router, and the length of the network cable is preferably less than 100 meters.

You're all using wireless routers, right? It's obvious that your router isn't set up properly.

The computer restarts, it should be restricted.

What kind of equipment is connected to the network cable that comes into your house?

You can use the following scheme to share the same network cable:

Explanation: Splitting a network cable into two computers can generally be achieved in the following two ways:

1: Purchase a router to realize, materials: a router, network cable on demand.

Solution: A: Buy a wireless router (**slightly higher):

It can be connected by a network cable or wirelessly, and the specific connection method is detailed in the manual of the wireless router. Advantages: Wireless receiving devices (computers, mobile phones, tablets, etc. that support wifi) do not need lines, enter wifi passwords, and instantly realize network connection of multiple devices at the same time.

B: When you buy a wired router, you can connect it with a network cable, and the specific connection method is detailed in the manual of the wireless router.

2: The connection method of the network cable is realized by adding the network card hardware and setting up two computers according to the 568A network cable twisting method (it is more cumbersome and not recommended).

Recommendation: Use a wireless router to enable multiple computers to share the same network cable.

If you have a router, you don't need to worry about your computer needing to be turned on to surf the Internet.

As long as there is no restriction on routing** Internet access, plug in the route, log in the route, and set the Internet password.

Go to the configuration page of the router.

The general router address is or.

Just look at the manual.

After entering, there should be a quick configuration step, select the Internet type, dial up the Internet, enter the username, password, and restart it.

Buy a router (4 ports are enough), 2 network cables, one from the Netcom to your cat connected to the router's van interface, and then the back of the 4 ports to choose one to connect to your own computer, and then choose a random port to connect to your neighbor, after the connection is completed, see if it is connected, if you connect to the router on the 2 computers The indicator light will be on, after connecting, you open the IE browser again, and hit in the address bar: this is the common address of most routers, and a user window will pop up, The username is admin to let you enter the password, which is the same as:

admin (note that it is all lowercase) went in,There is a setup wizard after entering the router,You enter the Internet account and password given to you by Netcom according to the prompts to save and log out,That's it,2 computers can go to the Internet freely,But the router has to be turned on,Generally, you set a time for the router to rest,Power off or shutdown will not affect the routing function,As long as it is powered on,The router will automatically dial up the Internet。 No need for users to dial by themselves, simple!

You can use the router, just go to the router's management page and set it up.

If you want to add a router or hub, the network speed will definitely be affected, you think about the road is so big, which is faster for two cars to go or one car to go?

Yes, you can buy a route, you can even connect the route.

First, measure whether your network cable is in good condition and whether the wireless Internet is far away.

The first thing to do is to find the reason from yourself, first look at your own home network cable is loose or other problems, if it really doesn't work, go to your neighbor.

Not as good as indirectly. You can see if the light of your router connected to his home is not flashing.

The best way is to ask the network company you are using to check whether your network is normal and whether it is disabled If it is normal, it is a problem with the line or a computer You can ask the technician who manages the network to help solve it

1. Maybe he used network management software such as P2P Terminator to limit your Internet speed.

2. The router he added has no connection pair and no set pair, resulting in your computer obtaining the IP assigned by her router, so you can't connect to the network.

Solution: Find the landlord first.

No, you can no longer use various setup methods.

There's something called P2P Terminator, and that's all I can say!

Is this kind of question to be tangled upon? You also have a wireless one in your house, can't you?

There's no need to set anything up! This problem is the problem when the wireless router assigns the IP! All you need to do is set your computer's IP address to 10 99 or less!

The DHCP server inside the wireless router assigns one IP at a time to the devices connected to it, and the allocation principle is 100 199. If your computer happens to be the IP address of this address range, there is a possibility of conflict! I wish you success!

Finally, let's see if the neighbor has added another wireless router, and it is in the same IP segment! If so, you can change the IP in the LAN port settings in his router to, so that whatever you do with it will not affect you! Because the IP he got was.

It's not the same network segment with you!

Hello. Does the nearby computer also use the same network cable as your neighbor's food? If it is, and your neighbor has access to the Internet, either your neighbor has gatewayed you, or there is something wrong with your computer, because other computers can access the Internet.

If the nearby computer is not on the same cable as your neighbor, then you can ask your neighbor to see if he can access the Internet, if he can't, and he doesn't turn off your Internet, then it's your computer's problem. Reconnect, and if that doesn't work, try reinstalling the system.

Dial in first to see if you can get on, if you can, it's a problem with the router to the computer.

If it is determined that it is the latter, then there are two questions, whether the router is adjusted well, and if it is adjusted, then at least one computer should be able to use it. Then check if the cable from your home to the router is okay.

Reset your router and try again to see if you can get online!